I have a problem, where i'm trying to find if a file exists, and if it does, update a textbox to the next number. These filenames with either start with one or two zeros (they are from a digital camera)My code goes like this:
[Code]....
The number increment is working, but if i start with 0053, the next number it puts is just 54. I need to keep the zeroes.
Not that it should matter.. the 2nd value in the csv is an IP address.. its in the file as 192.168.7.25(just an example), but gets read as 192.1687, if the file is setup as delimited in the connection string, does that have any restraints on the data being read? When i open the file in notepad, the comma is at the end of the IP address, when i open it in excel it is in its own column.. so what could be causing this? Because of this issue with the truncation, that is what is causing the primary key issue.. because there are other values that are similar like these:
192.168.7.25
192.168.7.26
192.168.7.45
because if the issue, it passes each one of those as 192.1687 Here is the table structure, in case it helps resolve this issue.
[id] [int] NOT NULL,
[IpAddress] [varchar](16) NOT NULL,
[MacAddress] [varchar](16) NULL,
[APTypeId] [int] NOT NULL,
[APUser] [varchar](256) NULL,
[APPass] [varchar](128) NULL,
[APLocation] [varchar](20) NULL,
[APFreq] [varchar](50) NOT NULL,
[APBand] [varchar](50) NOT NULL,
I have a GridView that has rather long header column names such as "Baseline Start Date". I have alot of columns, so I want to sqeeze the columns as narrow as possible without truncating. What are some of the things developers do for my scenario?
View 3 RepliesI have an Asp.Net web application system ,just wanted to know the procedure for increasing the idle time of a webpage
View 1 RepliesI have a table called TABLE_PRICE. Which SQL give me RUNNING_SUM_OF_PRICE output? This is the running sum of column Price in the TABLE_PRICE. Date is increasing sequentialy.
TABLE_PRICE
Date
Price
2010-01-01
1
2010-01-02
2
2010-01-03
3
i am new for wcf please help me proviede suitable web reffrence(examle) throught which i udersatande wcf all necessary things for masterning in wcf ( I AM USINGH VISUAL STUDIO 2008)for examale-> how to call wcf service in our asp.net application , how to create wcf service .......etc .
View 4 Repliesam reading Beginning ASP.NET 3.5 in C# 2008 and I ran into a problem.I am trying to get the source code to work in visual studio 2010. When I "F5" any given page I recieve 1 warning and 1 error.Warning 1 C:WebBeginning ASP.NET 3.5Chapter07StateManagementCrossPage1.aspx: ASP.NET runtime error: Section or group name 'scriptResourceHandler' is already defined. Updates to this may only occur at the configuration level where it is defined. (C:WebBeginning ASP.NET 3.5chapter07statemanagementweb.config line 14) C:WebBeginning ASP.NET 3.5Chapter07StateManagementCrossPage1.aspx 1 1 C:WebBeginning ASP.NET 3.5Error 2 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. C:WebBeginning ASP.NET 3.5Chapter03Web.config 46 I downloaded the books source code and opened VS 2010 > Open Web Site > choose where the source code was located and tried to run the sample page and it wont let me
View 1 RepliesI have a situation where I want a route in my application so that the application's index method can recognize this[URL]The problem is that, when I set up the route corresponding to the first URL, the route for the second URL does not work (even if I set up a separate route for that).
View 2 RepliesI'm pretty familiar with ASP.NET, and am currently writing an MVC app in ASP.NET.I'm at the point where I need to integrate reports into my application.The option I chose to go with (and I'm flexible on this) is SSRS.I have zero experience in SSRS and it seems that there are a LOT of steps involved in getting that set up, from installing the Report Server, configuring the Report Server, creating a report project in Business Intelligence Development Studio, and publishing the report to the Report Server. 1.) Set up and install SSRS properly. I'm using SQL Server 2008. (Not R2).2.) Creating and publishing a report to the Report Server.3.) Being able to access this report from my ASP.NET web application.
View 2 Repliesiam using asp.net with c#, iam having images in page .when i click on image the image size should be increase in the same window.then when i click again it should go to another page for edit.
View 1 RepliesI have an ASP.NET AJAX autocomplete extender with CompletionListCssClass=autocomplete_completionListElement :
.autocomplete_completionListElement
{
width:500px;
margin : 0px!important;
background-color : inherit;
color : windowtext;
border : buttonshadow;
border-width : 1px;
border-style : solid;
overflow :auto;
height : 200px;
text-align : left;
}
But for some odd reason the width of the auto complete list always takes up the width of the textbox even when I set the width to 500px.
I've got a loop that executes the stored procedure in a loop with over 40,000 iterations, like so:
SqlCommand command = new SqlCommand("WriteDataToDB");
command.Connection = _connection;
command.CommandType = CommandType.StoredProcedure;
command.Parameters.Add("@SignalID", SqlDbType.Int).Value = Arg_Signal.SignalID;
command.Parameters.Add("@SignalStrength", SqlDbType.Float).Value = Arg_Signal.SignalSiggestion;
command.Parameters.Add("@Time", SqlDbType.BigInt).Value = Arg_Signal.TimeWasHit;
command.Parameters.Add("@Value", SqlDbType.Float).Value = Arg_Signal.ValueWasHit;
if (command.Connection.State != ConnectionState.Open)
{
command.Connection.Open();
}
command.ExecuteNonQuery();
This code is called from a loop where I intercept and time every 1000th iteration. The times I get are below:
[0]: "Started 0ms"
[1]: "1000 done 578.125ms"
[2]: "1000 done 921.875ms"
[3]: "1000 done 1328.125m"
[4]: "1000 done 1734.375ms"
[5]: "1000 done 1140.625ms"
[6]: "1000 done 1250ms"
[7]: "1000 done 1703.125ms"
[8]: "1000 done 1718.75ms"...........................
This is my first time working with web parts. Was wondering if anyone can show me how to create a new webpart project in VS2008. I don't see any options for creating a "web part template" when I go to create a new project.
View 2 RepliesI'm sure there's a blog post or tutorial out there somewhere on how to accomplish this, but I'm having trouble coming up with the keywords to search for. I'm building a website with a small content management system that allows the user to create articles that will be published to the site. I want the home page to display the 10 most recently submitted articles.What I don't want however, is for the home page to be 6 miles long. I would like to cut the article off after the first paragraph, add ellipses, and have a "continue reading" link that will allow them to view the full article. Does anyone have a link or information on how to accomplish this?
View 6 RepliesI have an application (asp.net 3.5) that uses a fileUpload control. I have the entry in web.config set to:
<httpRuntime executionTimeout="3600" maxRequestLength="2097151/>
If I try a large file upload (around 20M), I get the "Internet Explorer cannot display the webpage" error. This code worked on another server and works locally, but when put on a new web host's server, I am getting this error all of a sudden. Is there any way I can get more information as to the cause of the error? I set my browser to uncheck "Show friendly http error messages", but I don't get more information.
I want to implement the following page by Asp.net version 4.0 and ajax but I want to have loading by order like loading item 1 and 2 and so on. I have container or web part but mostly container like simple asp.net panel. how I can implement it ? I used updatepanel and update progress but it doesn't work that I have expected before.
View 3 RepliesI am using materpage for building my website....In the masterpage i used a table with two columns . In that table in one column i defined leftmenu and the other i placed content place holder. While building the child pages. I am placing all that required in content place holder. while doing that in one of my page i used GridView. When the GridView Size is increasing the left menu is also being disturbed.
View 2 RepliesI'm trying to manually call the ASP.NET (3.5) javascript postback function __doPostBack from my javascript code. The problem is that the postback script block, that is normally rendered right after the beginning of the <form> tag (and the hidden fields), is occasionally rendered near the closing </form> tag. Is there any way to force it to be rendered near the beginning of the form tag? Also, how does ASP.NET decide when/where to render the postback client script block?
Edit > Additional Info: The javascript code resides inside a user control that references the __doPostBack function. The control itself does not contain any 'postback controls' that would call that function. (When I mention 'postback controls', I mean ASP.net controls that call the __doPostBack function and not the asp.net ImageButton and Button controls)
Based on what I've observed and @Brian's comment on the dependency of the postback script on the availability of 'postback controls' on the page, I've found that when the page contains controls that cause postback, the __doPostBack script block is rendered after the opening <form> tag and when there are none, it renders them near the closing </form> tag (or according to this it's not even supposed to be rendered). Now it would make sense for ASP.NET not to render the postback script if there are no controls that require it, but the apparent position of the script near the closing tag is the one that still eludes me. I haven't been able to find any documentation that suggests this behavior. All I've been able to find was this.
Add a 'postback control' and set its visibility to hidden via css (not the Visible property). eg. <asp:LinkButton ID="RequirePostBackScriptLink" runat="server" style="display:none;" /> (this is what I'm using) Add the control to the Page.RegisterRequiresPostBack and implement the IPostBackDataHandler interface.
Finally, as @Jonathan_Bates mentioned in his post, the proper thing to do is to wrap the reference to __doPostBack inside a function that is an event handler to load (or ready if you're using jquery). That way, there wouldn't be a need to depend on the actual placement of the __doPostBack script.
I have a treeview which will wrap text if the text is longer than a certain length. And for each nodes, I will show a image before the nodes text. So the question is when the text is wrap, the image will become in the middle line of text. I want to show the image just before the beginning of the first line. How can I do that the following is my code:css:
.secondMenu {
FONT-WEIGHT: normal; FONT-SIZE: 8pt; vertical-align: top
}
aspx:
<asp:TreeView ID="tvMenu" runat="server" AutoGenerateDataBindings="False"
ExpandDepth="2" NodeIndent="0"
NodeWrap = "true"
[code]...
I had an interview recently, and had a question that I couldn't really answer
They gave me a string (One, Two, Three, Four, Five, Six, Seven.....)
they wanted an output, something like:
Six, two, five, three......
(I'm not 100% sure of the exact strings) They wanted the logic flow I'd use to get the output from the beginning string.
Can anyone help me understand this flow and how it could be programmed?
I am using the asp.net and framework 2.0 with Ajax enable web.i have a text box and when user will enter "a" or number in this will search the name started from "a" character or number if he or she enter the number basically we can say live-search.
Employee search: Textbox.In this text box she/he will enter the first character of name or first number of employeeno and according to the a character name will search in list.
I have recently moved our ASP.NET session state from InProc to a Sql Server solution. I can see session data being inserted into the Sql Server database. I'm monitoring the w3wp.exe process using the "Private bytes" & "# Bytes in all heaps" performance counters.As I navigate through the website it places data into session, however the private bytes counter still climbs on the server hosting the website? I thought the session data was being written to the database and not being stored in memory? The managed bytes remain constant, and I'm pretty sure all the objects going into the session are managed types.
View 1 Repliessee my jpg picture to identify problem easly
[URL]
when i change quantity up it s increasing 1 but sum doesnt increasing if i click twice its increasing but wrong where i am doing wrong
my code is
[Code]....
I have the following routes setup in my route config file. I have a config reader that maps these to MVC-style routes.
[route name="customers" url="customers/{statename}/{marketname}/{pagenumber}"]
[controller name="Customers" action="Display" //route]
[route name="pcustomers" url="{customername}/customers/{statename}/{marketname}/{pagenumber}"]
[code]...
Is is possible to configure FileAppender in log4net to add new entries at the beginning of log file? Currently it is adding entries at the end and reading newest entries requires scrolling whole log down. It would be more comfortable to read from the beginning.
View 2 Replies