Inserting Data But Getting "duplicate Values" Error?
Jan 15, 2011
I am attempting inserting into an Access database, and the insert is successful (when I open the database the data is there), but I'm getting an error: "The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again."This is really confusing me. No matter what I insert, it still gives me the same error. And I don't understand why it's giving me an error even though it's working. Here's my codebehind:
Protected Sub Wizard1_FinishButtonClick(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.WizardNavigationEventArgs) Handles Wizard1.FinishButtonClick
'Collect Data
[code]...
View 2 Replies
Similar Messages:
Nov 7, 2010
I have a formview and inside it there are two textboxes taking integer as input.I put a condition that if both textboxes are empty then user should be notified that "Please put value in any one of the textbox".It is working very fine.From database side DBA checked that if user input any integer value in any one of the two textboxes and if it is already found in database then there is no insertion.The problem is that everything is working fine and i checked in the database that the record is also not inerting due to duplicate check but user is getting message that "Record inserted successfully."How to stop this message and how to notify user that you have entered duplicate value and transaction should also not been done. Means all inputs should be there rather than clearing textboxes that could be done when "Record Inserted."
[Code]....
View 1 Replies
Aug 25, 2010
On inserting record, I want to check that for example if a user enters a telephone number for any record is already in the database then it should validate that the number already exists in table and you cannot enter a duplicate value.
Then if user will provide some other telephone number then he allows to insert record.
For insertion of record I used ObjectdataSource.
User will enter telephone number in a simple textbox.
I may want to inform that I am working in asp.net2.0 and also not allowed to use any third party control or ajaxtoolkit.
View 11 Replies
Feb 19, 2014
I have a detail view form consist of five fields my 1st field is jobnumber which is primary key i want to do that when user by mistake enter the duplicate jobnumber error occur that this is already used how can i do this ?
View 1 Replies
May 10, 2010
I need to check for duplicate records before inserting them into the SQL database.Thus I have the following codes:
For count = 0 To GridView1.Rows.Count
If (GridView1.Rows(count).DataItem("Student Name").Equals(dtDataTable.Rows(count).Item("Student ID"))) Then
lblMsg.Text = "Records Existed"
End If
but there are error message. "Object variable or With block variable not set."
View 11 Replies
Mar 19, 2010
I'm using Enterprise library, but the idea is the same. I have a SqlStringCommand and the sql is constructed using StringBuilder in the forms of "insert into table (column1, column2, column3) values (@param1-X, @param2-X, @parm3-X)" + " ";where "X" reprents a "for loop" about 700 rows like so
[Code]....
So after all is done, I have 700 insert statements in one batch and of course, I did another 700 loops and added the values to those parameters. It runs fine and fast for a few days. However, last night, suddenly I get this error
[Code]....
View 2 Replies
Aug 4, 2010
my ddl1 and ddl2 in update panel so i want to insert item in ddl using following condition. It is working fine but when you choose ddl2 more than one then it insert item every time meand duplicate value and populate ddl1 every time.
protected void DropDownList2_SelectedIndexChanged(object sender, EventArgs e)
{
if (DropDownList2.SelectedValue=="1" )
{
DropDownList1.Items.Insert(0, new ListItem("first", "1"));
DropDownList1.Items.Insert(1, new ListItem("Second", "2"));
DropDownList1.Items.Insert(2, new ListItem("Third", "3"));
}
else if (DropDownList2.SelectedValue == "2" )
{
DropDownList1.Items.Insert(0, new ListItem("first", "1"));
DropDownList1.Items.Insert(1, new ListItem("Second", "2"));
}
}
View 4 Replies
Oct 30, 2010
I am creating roombooking website in asp.net.
and i am facing problem while inserting the record.
eg:
if the room is already booked from 1st march 2010 to 10th march 2010.and if anybody is booking the same room from 4th march to 9th march it should show error message stating that
this room is already booked from 1st march to 10th march.
View 1 Replies
Feb 18, 2011
The user will enter values in the textbox of the gridview in item template. A button outside the grid, when it is pressed we have to highlight the duplicate values.
Is there is any way to use validation control.
View 2 Replies
Jan 24, 2016
I have 3 textboxes and one submit button outside gridview. This textboxes submit value to gridview.
I want to be able to check and stop duplicate value in gridview.
View 1 Replies
Feb 7, 2011
sample SQL data:
table1:
eid ename
1 vijay
2 shankar
table 2:
id eid sal
1 1 4000
2 1 3000
3 2 2000
i want to bind the below data format in repeater.
vijay
4000
3000
shankar
2000
View 2 Replies
Aug 18, 2015
Below is my function which insert textbox value into grid view .this work fine .
Now I want to compare grid view row with textbox value if already exist in grid view then it give me massage already exist with same name means duplicate data cannot insert into grid view
<script type="text/javascript">
$(function checkuser() {
// $(function () {
// $("[id*=btnAddRow]").click(function () {
var operator = $("[id*=txtoperator]").val();
var value1 = $("[id*= txtvalue1]").val();
[Code] ....
View 1 Replies
Jun 2, 2010
I have a gridview containing serial-numbers.
I would like to format the background each data-row that contains a duplicate serial-number value.
I'm planning to do this using a DataBound event handler.
So, in English:
Set background colour of THIS_ROW to red where the Serial_Number of THIS_ROW is the same as the Serial_Number of ANY_OTHER_ROW.
All rows with duplicate serial-numbers would be red.
I'm not sure how to write the code for this event.
The gridview is bound to a SQL datasource. Getting the dupes in SQL is easy:
SELECT Serial
FROM Table
GROUP BY Serial
HAVING (COUNT(Serial) > 1)
View 8 Replies
Apr 8, 2010
generating logic for follwing:An option to add a range of computers based on tag numbers, for instance, user input 800101 and 800110 would add computers SYS800101, SYS800102, SYS800103, SYS 800104, SYS800105, SYS800106, SYS800107, SYS800108, SYS800109, and SYS800110. Currently the app adds a single computer at a time.Here I am using ASP.NET using C# and my backend in active directory. I had made the following code and the problem is when I enter the range like given above only the first computer in entered in the list and does not give me any error.
[Code]....
View 4 Replies
Jul 19, 2010
I've posted this in the 'Datasource Controls' thread and didn't get the answers I was looking for. So I thought I'd try here; I recieved some good answers in this thread. I have a page where a user inserts new data in a table. The page consists of a series of textboxes and a button. My sqldatasource code is below. I don't have a SELECT statement, just an INSERT statement. I want to be able to have an error message (response.redirect, label, msgbox, etc.) when the user tries to enter an ID ( the PK) that already exists (instead of the usual "unique constraint violated" message)
View 19 Replies
Nov 18, 2010
have a form where I insert record via DetailView control. I have some string fields. For each string field (nvarchar in sql) I have defined the Default Value in the SQL SERVER (2008) as ''. Also I have added to each InsertParameter of the DetailsView a DefaultValue="".Yet still, if the user enters no value for one of the string fields, NULL is inserted into the table.
View 4 Replies
Jun 8, 2010
I am using Stored Procedure as my Insert/Update command in a FormView. The sp returns a value which I will need to use. How do I retrieve the value after doing an insert / update?
View 4 Replies
Mar 15, 2010
I have a gridview with delete buttons for each record (I've used AccessDataSource). I have loaded the data in and have many duplicate records.
I just want to use the delete button delete each duplicate record while remains many duplicate records. For example:
I used the following query to load in duplicate records:
SELECT * FROM TableA WHERE ([ControlA] IN (SELECT [ControlA] FROM TableA GROUP BY [ControlA] HAVING (COUNT [ControlA]) > 1)))
ID ControlA PIN# FaceValue Date
delete 76637 128232 1234 5 6/4/2006
delete 72722 128232 1234 5 6/4/2006
delete 76638 234567 2345 10 7/3/2006
delete 72723 234567 2345 10 7/3/2006
What is the query to delete single duplicate record instead of deleting all duplicate records?
View 25 Replies
Nov 20, 2010
why if I write the following SQL SELECET under gridview or details view I statement get all the data under thelogin name :
SELECT * FROM CustOrder WHERE (CustomerName = @UserName)
While if I write the following INSERT statement it save all data but it does not save the
login name to database:
INSERT INTO CustOrder
ItemName, ItemPrice, Quantity, CustomerName, Status)
VALUES (@Username,@ItemPrice,@Quantity,@Username, 'New Order')
View 23 Replies
Apr 27, 2010
I want to insert Data Rows into Gridview from web page and I want to send the Inserted Row to Database table.
So I have 3 columns to insert the row.
I added itemtemplate & fotter template with textbox control for each column Inside Templatefield.
I added two buttons [Insert & Cancel buttons ] in fotter template to insert the row in Gridview.
After debugging the page I can't see gridview in my webpage. i can see only EdItdatatemplate items only.Why ?
Can you look at my code & me to insert the records in gridview..
.aspx page,
[Code]....
.cs
[Code]....
View 7 Replies
Dec 28, 2010
My problem is this "I have all the tools, VS 2005, 2008, 2010. I have every book, I have SQL server 2005 and 2008" I have all the tools, but I do not know what tool or technology to use when starting out learning all this. I juat do not know what book teaches what I need to do for something like below.
Here is my question:
I created an .ASPX webform that is to "Submit" to a SQL 2005 database. I gave this form to my DBA, and he has made up a Data Model. Now I have to figure out how to write the ASP.NET code so it will submit to the DB. My first issue is not knowing this:
1. "How do I loop through my CheckBox List", and then insert the values checked into a "Database Table" (Each Checkbox value MUST be a seperate row in the table, the DBA does not want a seperate column for each checkbox value)
2. The database is using stored procedures
3. My third issue is this: "I do not know "where" to put the "code". If you do resond to this,
Summary: I just need shown the code on how to "loop through" the CheckBox List on my form, and insert those values into a database table as seperate rows.
View 2 Replies
Aug 21, 2010
I want to Check Gr #(PK) of student wheter exist in table or not id exist show Msg in Label after lost focus from text box .. I tried AutoNumber in Access but it showing error while insertion
Note : im using form View control for insertion...
View 1 Replies
Jan 29, 2011
I'm having some problems with the interface I've created. I am getting value and ids in a string using for loop on the controls(objects). After some searching, I've discovered that it isinserting an empty string into my database fields as opposed
to an null value. I need my application to insert NULL values, not emptry strings. Can any one suggest me on this and also how can i prevent sql injection on the above code. because i am passing like following :
@variable1='Name,Address,Remarks' //(as a Column name)
@variable2='Pritesh,Mumbai,any remark' //(as a column value for above.)
exec myprocedure 'tablename','@variable1','@variable2'.
if any one pass single inverted comma in the above column value in @variable2. my code give me error. how can i prevent this sql injections..
View 1 Replies
Mar 1, 2011
i have list view inside another list view like lv1-->lv2 now problem is inserting record in nested list view see error...
Inserting is not supported by data source 'SqlDataSource2' unless InsertCommand is specified.
another problem when i keep datasource2 in LV1 selected template but datasource2 is not binding lv2.. how can bind lv2...?
View 1 Replies
Feb 17, 2011
I have 2 listboxes, when i add a item retrieved from database to Listbox1, i need to select the item and bring it to listbox2. But i do not want to have same records added again. In my case, i cannot use the codes below
[Code]....
because the text displayed on listbox1 and after transferring to listbox2 are different. So i come out with a logic which is "if listbox2 does not contain the item value in listbox1 then populate listbox2". So i tried the codes below, but it is not working as there are errors
[Code]....
View 2 Replies
