Installation :: Deploying 32bit Web App On 64bit Win Server

Jul 23, 2010

I have a website designed using .net 1.1 and upgraded to 2.0. It works fine on Win NT. However, the same application is not working on Win 2003 64 bit server. I read some article on web. Everyone recommends that IIS should run on 32bit mode in win 2003 server if the app was orginated from 32bit. So, I made IIS to run on 32bit mode. The problem is now asp.net config tab is missing in IIS. Is it recommended to convert IIS to run on 32bit in Win 2003 64 bit edition? If so, how do I keep the asp.net configuration tab? Why cant the 32 bit app unable to run on 64bit? Any conversion tool available to upgrade from 32bit to 64bit?

View 2 Replies


Similar Messages:

Web Forms :: Using 32bit Hashcode In 64bit Windows 2008 With 64bit IIS 7.0?

Dec 8, 2011

My asp.net 2005 old application was working on windows 2003 server. I have used asp.net hashcode method to store user password in database. Now I shifted my asp.net 2005 application on windows 2008 R2 server. But my Password hashcode logic is not working due to 64bit windows 2008 server architecture & 64 bit IIS 7. I dont want to set IIS on 32bit mode.

So How can I check my 32bit user password on windows 2008 64bit server with 64 bit IIS without changing hashcode logic? 

View 1 Replies

32bit 64bit - Configuring 32-Bit Application On A 64-Bit IIS Server?

May 21, 2010

I'm trying to install a 32-bit ASP.NET application onto a 64-bit IIS server running on Windows Server 2008. This is a clean installation of the operating system with no other applications installed.As a prerequisite for our installation, we run the 32-bit version of aspnet_regiis -iIt fails with the following message: The error indicates that IIS is not installed on the machine. Please install IIS before using this tool.Additionally:IIS is definitely installed. The 64 bit version of aspnet_regiis runs cleanly without warnings.€œEnable 32 bit applications" is set to True in the DefaultAppPool's Advanced Settings.
The IIS Metabase and IIS 6 configuration compatibility" component is installed.We have a test VM where this error occurs as well as test VM where both the 32 bit and 64 bit versions of aspnet_regiis run without errors. We've had no luck distinguishing the differences between the two test VMs.We have struggled with this issue for several days to no avail.

View 2 Replies

Installation :: Many Of The Applications (web And Windows) That Maintain Are 32bit And Are Installed On 32bit Servers?

Jan 11, 2011

getting a new laptop at work and I'm curious what, if any, issues I'm going to encounter when I move from my 32bit laptop to my 64bit laptop running Win7 64bit and VS 2008/2010 64bit.Many of the applications (web and windows) that I maintain are 32bit and are installed on 32bit servers

View 2 Replies

Configuration :: Confusion Deploying 64bit Website To Window 2003 R2 64bit?

Mar 30, 2011

Apologies if this is is in the wrong place but I'm not sure where this issue fits. My issue deals with setting up an ASP.NET 64bit website on IIS6 (W2003 R2) so it could be a compiling problem or an IIS setup issue - I've read so much now I'm all tied up in knots.I have a web app which has been written on top of my company's custom framework, both have been compiled in .Net 2.0 with the "AnyCPU" option and run quite happily on my laptop within Visual Studio 2008 (on a Windows 7 Enterprise 64bit laptop). All of the code is managed code with the exception of 1 3rd party dll that I think is still 32bit.

Question 1: when running on my laptop in VS, is my web app running in 32bit or 64bit mode, given the OS is 64bit? I have both versions of .NET 2.0 installed.I have a new desktop that is to be our test server, and has been installed with Windows 2003 R2 and had IIS6 configured (same as the production environment). Again, both versions of .NET 2.0 are installed. When I copy my web app to the server and browse to the site, I get the dreaded "%1 is not a valid Win32 application", and sometimes (depending on what settings I've been playing with) "Service Unavailable" messages. If I register the .NET version to 32bit, and set the IIS 'Enable32bitAppOnWin64' to true, the app runs happliy the same as when on my laptop......but I don't want it to do that! I want to run IIS to run in 64bit mode with the 64bit .NET 2.0 Framework!Question 2: What does IIS see to make it think that my app is a Win32 app or am I interpreting that message wrong? Is the fact that I have 1 32bit dll in the in folder enough for IIS to say "32bit" and keel over?

My understanding of the "AnyCPU" option was that as long as the code is all managed code within the application, the bitness of the OS does not matter so I cannot understand why IIS6 cannot run the app in 64bit mode....and no, installing IIS7 is not an option.

View 3 Replies

Check If IIS Is In 32bit Or 64bit Mode?

May 10, 2010

I'm trying to deploy a site to a 64bit OS. I'm deploying to IIS6. The site was developed on a 32bit server. The site deployed correctly however it's trying to access a COM component and that is failing.

I believe the error is occurring because the COM component is a 64bit version on the 64bit OS. And IIS6 is running in 32bit mode on the 64bit server.

I'd like to confirm this but I can't seem to find a definitive way to check if IIS6 is in 32bit mode or 64bit mode.

Would someone know the best way to check if IIS6 is in 64bit or 32bit mode?

EDIT: I'm using IIS6

View 2 Replies

Determine If IIS 32bit Or 64bit Installed?

Jan 6, 2010

I would like to know whether there is a way to determine programatically if IIS is installed in 32bit or 64bit mode.

View 6 Replies

IIS7.5 Running Both 32bit And 64bit Websites?

Sep 22, 2010

Can someone tell me if its possible to run both a 64bit compiled web site and a 32bit compiled website on the same IIS7.5 machine. The core OS would be Windows 2008 R2 64bit. I looked around and can only find how to switch the appPools to 32 or 64. But the question I want answered is can you have one appPool 32bit and another 64bit?

View 1 Replies

Installation :: Get 64bit Of .NET 3.0 And .Net 3.5?

Mar 23, 2011

Trying to get my server updated with 64bit versions of .net 3.0 sp1, 3.0 sp2, and 3.5 sp1 before instaling 4.0. However. ASP.NET Download page only gives me one option - download and install windows platform installer with 4.0 and it doesn't seem to even realize that I am running 64bit.

View 5 Replies

WebResource.axd 404 Error - Windows Server 2008 64bit?

May 16, 2010

We Installed new application in our dedicated server. I struggle with an issue for the last few days. I get 404 no found in all WebResource.axd requests.

I have uninstall and install .net 2.0 - I have .net 3.5 installed as well. using webresource decrypter I found that many JS files, such as WebForms.js generate the erorr.

I check the iis handlers mapping for .axd

I disable http comp.

View 1 Replies

SQL Server :: Microsoft.Jet.OLEDB.4.0" Has Not Been Registered In Sqlserver 2008(64bit)?

Mar 14, 2011

When i execute the openrowset with OLEDB4.0 in sqlserver2008(64bit),then the following error comes "Microsoft.Jet.OLEDB.4.0" has not been registered"and the query is

Select * from OPENROWSET('Microsoft.Jet.OLEDB.4.0',
''Excel 8.0;Database='c: est est.xls ';HRD=NO;',
'SELECT * FROM [sheet1$]') SELECT FirstColumnName FROM tablename

View 3 Replies

Installation :: SQL Server Express 2008 R2 Installation Failed

Jun 12, 2010

SQL Server Express 2008 R2 installation is failed...plese see the error log ...i gave the password "sa"..please guide me Overall summary Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit message: The specified sa password does not meet strong password requirements. For more information about strong password requirements, see "Database Engine Configuration - Account Provisioning" in Setup Help or in SQL Server 2008 R2 Books Online.

View 1 Replies

Developing With SQL Server 2005 And Deploying To SQL Server 2000

Nov 16, 2010

I'm currently developing a web application using SQL Server 2005, ASP.Net MVC, ASP.Net SQL Membership Provider (for authentication and authorisation), and Linq to SQL. Everything works great and is running as planned in the development environment.However, the production environment has a SQL Server 2000 installation, and we are unable to obtain a copy of SQL Server 2000 to use in development.Upon deploying the web application to the the production environment, what options do I have for migrating the database (schema + data) from 2005 to 2000?

View 2 Replies

Configuration :: Deploying Web Application - Not Working After Deploying?

May 4, 2010

I am using XAMPP to publish my a .net application. The server is working fine. I created a sample login.aspx file, and it works fine. I deleted the sample login file, and I build and copy all the files to the XAMPP directory. When I tried to acces the page, it gave an error message "Access forbidden! You don't have permission to access the requested object. It is either read-protected or not readable by the server. If you think this is a server error, contact the

View 8 Replies

Deploying Web App To Different Server

Oct 11, 2010

I was trying to deploy an asp web app over to a different server and when I ran the .msi setup I got the error:

Setup requires Internet Information Server 4.0 or higher and Windows NT 4.0, Windows 2000 or higher...

Now its obvious that it has version 6.0 since windows server 2003 is installed, do you have why this is happening or should I just move my entire application with code over? My database has already successfully been installed on this server and just need the app to be deployed to this server.

View 1 Replies

AJAX :: Install Extensions On Windows7 32bit Machine?

Feb 11, 2011

I've gone through the process of installing the environment of a large project which I'm involved with, on a new machine with Win7 32bit and Visual Studio 2008.I HAVE to install ASP.NET Ajax Extensions but being so old at it is, it requires .Net Framework 2.0 or 3.0 instaled. The installers of 2.0 or 3.0 will not install and I just get a massage that I need to install them (2.0 or 3.0) through the Windows Components dialog ("Turn Windows features on and of" dialog). This is not possible because the only framework available there is 3.5.1 which is no good for the Ajax Extensions.Removing the 3.5.1 in order to install 2.0 or 3.0 doesn't work either and result in the same massage.Since Microsoft haven't yet come up with some new extension package (as far as know), I'm stuck in a dead end. What do I do?

View 6 Replies

Configuration :: Deploying A Web App With Sql Server Database?

Apr 19, 2010

i've written a small application using asp.net and sql server express.

my question is after checking the application in the visual studio environment how can i get it to work in a way that

users that are working on the same network as me could use it to?

i've changed the user instances option in the web.config file to false, and from the info i found so far i understand that security measures are to be applied, but i just couldn't get it to work...

View 2 Replies

Deploying From Sql Server Express To Datacenter?

Mar 23, 2011

I'm taking the database that I created with SQL server express and putting it on a server in a datacenter. There are 2 database files in AppData folder: the aspnetdb.mdf file and the file I created for my site MySite.mdf. I'm using the ASP login control and that works with the ASPNETDB.mdf file and it's working. If I log in without the correct username/pwd, it'll display a bad login message.

However, as soon as I login and the site goes to make a request to MySite.mdf, I get an error "Invalid object name 'dbo.Users'." which is the name of the first table the site looks into after the login.

I've attached the MySite.mdf file to the server and copied the connection string the hosting company is generating into the web.config file and left the rest as is.

Could it be that I can't attach a sql express file?

View 1 Replies

Deploying LightSwitch App - Server Error

Sep 11, 2011

I'm trying to deploy a LightSwitch App and it tells me my "targetFramework" attribute in my web.config file is wrong and it is saying 4.0 so I don't know what to do. Here is the error message. If you like, you can visit my site [URL] .... and click on "Access EApps" to see the message as well.

Code:
Server Error in '/Eapps' Application.

The value for the 'compilerVersion' attribute in the provider options must be 'v4.0' or later if you are compiling for version 4.0 or later of the .NET Framework. To compile this Web application for version 3.5 or earlier of the .NET Framework, remove the 'targetFramework' attribute from the <compilation> element of the Web.config file.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Configuration.ConfigurationErrorsException: The value for the 'compilerVersion' attribute in the provider options must be 'v4.0' or later if you are compiling for version 4.0 or later of the .NET Framework. To compile this Web application for version 3.5 or earlier of the .NET Framework, remove the 'targetFramework' attribute from the <compilation> element of the Web.config file.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[ConfigurationErrorsException: The value for the 'compilerVersion' attribute in the provider options must be 'v4.0' or later if you are compiling for version 4.0 or later of the .NET Framework. To compile this Web application for version 3.5 or earlier of the .NET Framework, remove the 'targetFramework' attribute from the <compilation> element of the Web.config file.]
System.Web.Compilation.MultiTargetingUtil.ValidateCompilerVersionFor40AndAbove(String compilerVersion) +235
System.Web.Compilation.MultiTargetingUtil.ValidateCompilerVersionFor40AndAbove() +139

[Code] ....

View 6 Replies

Configuration :: Deploying Web Reference On Host Server

Mar 9, 2010

I've added a web reference locally which looks up post codes. All works ok locally. Now I just want to deploy this to my web space. There is a app_WebResources folder with various files that were created when I added this. Basically what I want to know is How do I get all this to work online?

View 7 Replies

Configuration :: Deploying Website To IIS Web Server Access Using IP

Aug 31, 2010

I have my Website Application [URL]. How is it deploy my site to web server [ IIS ] so that it can be accessed via intranet.

View 1 Replies

Security :: Deploying And Encrypting Web.Config On Server

Nov 12, 2010

I have written a couple methods that encrypt and decrypt the appSettings section of my web.config file using the WebConfigurationManager. I just hooked up the methods to the page_load event to test that it works, which it does. Now I need to deploy to a web farm and need advice. What is the best way to make it so I can encrypt, but more importantly decrypt the web.config when I need to? I thought about putting a hidden page with "encrypt" and "decrypt" buttons, but that seems risky. What is the "accepted" method for rolling out something like this?

View 1 Replies

Configuration :: Deploying Web App To Windows Server 2003

Oct 17, 2010

I've been given a virtual dev environment being windows server 2003 and I need to publish a web app to it. I've deployed apps quite easily using the publishing wizard but I'm not sure how to do deploy to a windows server.. can someone please provide a link or a guide on how to do this as I need to set it all up and I really don't know where to start.

View 2 Replies

Deploying Web Application On Server Results In Error

Apr 4, 2011

I am facing this error. My ASP.net website is running fine locally.

View 2 Replies

Deploying Website - 500 - Internal Server Error?

Mar 22, 2011

I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add to web config I get following error:

Server Error 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. What I need to do now?

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved