i finally got vwd to work as an admin(windows 7) but now i get the error screen below:
Where can i find these, i went to add/remove programs, windows features, and there is only one box checked for ii6, no other options, no "Windows Authentication". Can I get these items somewhere else? I didn't see them on iis web site either.
I have Visual studio 2008 with Win 7 Ultimate, i want to update My .net frameWork 3.5 to 3.5 sp1.
I download .net frame Work but the setup can't run it disapperars after some seconds.....
I need to update .net frame work 3.5 to .net frame work 3.5 sp1 for the new features of 3.5 sp1 like Entity Frame Work.
Have anybody experienced problems in running Visual Studio 2008 in Windows 7 (64 bit)? Please post your feedbacks o0n using the Visual Studio on Windows 7(64 bit).
Was any service packs installed?
am using a windows service created by me it works fine in debug mode.I have created a setup for installation of windows service and installed it on the same machine.For testing i am creating a notepad file in c:\temp123.txtIts working gr8 in debug mode but not working when installed using a set up . also i have used same set up on another machine.Its not working thr as well.What can be the reason.Note:- two weeks back i have checked it using installer on another machine it was working, but suddenly now its not working any where.
View 10 RepliesI got this error
Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message:
Default Role Provider could not be found.
Source Error:
[Code]....
Source File: C:utvPlaygroundxxxweb.config Line: 44
I have OS windows 7(64 bits), Visual studio 2008 and Oracle 11g I have run "InstallAllOracleASPNETProviders.sql" who comes with the Oracle installation. When I run in debug I can run this application, but not otherwise. And in IIS manager, I can't se the Oracle provider? Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
My laptop is running Windows Vista. I recently upgraded it to Windows Vista SP2 and I am trying to install .Net Framework 3.5 on my laptop and whenever I try to install .Net Framework 3.5 I get the following error (error code - 1603):-
54] Microsoft .NET Framework 3.5 'package': [2] Error: Installation failed for component Microsoft .NET Framework 3.5 'package'.
MSI returned error code 1603
[07/20/10,23:05:11] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.5 'package' is not installed.
I try to install vistual 2005 on Win 7 On meantime I have net1.0 sp3 developer ;net Framework 2.0 , Microsoft Device Emulator version1.0 -ENU,Microsoft Visual J#2.0 Redistributable Package( can I uninstall This package)the studin 2005, but when I try to install the update (VSBsp1-KB926747-x86-INTL) i get hte error:The update patch cannot be installed by the Windows Installer service because the program to be updated may be missing, or te upgrade patch may update a different version of the program, verify that the program to beupgraded exists on your computer and that you have the correct Upgrade patch how to deat with this problem??
View 6 RepliesI tried to develop the asp.net 3.5 by using the windows authetication and it seems to work fine. I had tried this code on my machine (local iis6):
Response.Write(User.Identity.Name.toString());
It returned correctly "my windows login usernameDomainname" however, I tried to deploy it on the windows server 2008, it returned "computer name/Administrator" Then, I tried to access this page from my computer which was redirected to 401 error. Moreover, I looked for the system property which showed that this server and my machine are on the same domain group.
I've encountered a problem while installing Visual Studio 2010 on Windows 7, I've tried to modify the privileges of the destination folders to no avail, I've also tried to delete everything related to it with a removal tool. The problem is that the installation is always unsuccessful at the same point, providing me a Blue Screen of Death (twice) and the following error message (infinite amount of occasions):
[Code]....
Does anybody know the cause of the error? Is there an easier and less time consuming solution than reinstalling the whole system?
i am trying to install SQL Server R2 on my windows 2003 server (I downloaded the x64 version) but on the installation directory, just before i click next, to get the error, the path is as follows: C:ProgramFiles(x86)Microsoft Sql Server im not too sure if thats the problem though, just guessing, since i dont know anyother problem, and its a new server. I also tried multiple server restarts and still got the same error.
View 6 RepliesI just downloaded and installled the Microsoft Windows Azure SDK yesterday for the first time and I am having issues running the application as I all I am getting is 503 errors. I run Windows Server 2008 R2 on my development machine and even tested it on another co-workers 2008 R2 and couldn't even compile the application. He got this error instead "A problem occurred while trying to set the "References" parameter for the IDE's in-process compiler. Error HRESULT E_FAIL has been returned from a call to a COM component."
From within my Windows Server 2008 R2 Hyper-V Virtual Windows 7 x86 enviroment, I was able to successfully build and run the Windows Azure SDK and it even showed the base ASP.NET application.So my question is, does the Windows Azure SDK for Visual Studio 2010 w/ Visual Studio 2010 SP 1 installed not work under Microsoft Server 2008 R2?
We have a website portal hosted in Windows 2003 server. For security reasons we are using different windows Login user say (xxxx) for signin other than Administrator. Now with this user (xxxx) name I installed .net Windows Application. It was working fine. For some reasons I renamed the original windows Login user(xxxx) to different say (yyyy). Now this .net Windows Application is not working with (yyyy) and even it is not allowing me to uninstall it.
View 3 Replies In Windows XP, I used the following command line to tie a particular website to a particular version of .Net Framework:
C:WindowsMicrosoft.NetFrameworkv2.0.50727 aspnet_regiis -s w3svc/1/root/sdcrrlf (sdcrrlf is the website and is written in ASP.NET 2.0; hence uses v2.0.50727; some other of my sites use V1.1.4322)
This command line does not work in Windows 7 with IIS 7.0; error message says path is incorrect.
When i was building my project in my local machine it was giving me the below error...."Error 1706:An installation package for the product Microsoft Visual Studio 2008 Shell(integrated mode)ENU cannot be found!!!Try the installation again using a valid copy of the installation package 'vs_shell.msi'"
View 1 RepliesI set up VS 2008 team suite on windows server 2003 ,and when I begin a new web site and try to run this website I have error saying
Error 61 Unrecognized configuration section system.serviceModel.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config 136
I tried to edit in Machine.config but It did't succeed
I am getting an error saying "ASPNET account is not present in this machine" when I try to install Sitecore on my machine after I installed visual studio 2008..
- My machine is running on windows XP sevice pack 3
- I installed Visual Studio 2008 and .NET framework version 3.5 SP1 on that machine
- I can see that ASPNET User group account Under Users and Groups and it doesn't have "Account is locked out" ticked under general tab
- Also I ran aspnet_regiis -i many times but didn't help; actually I red in one post that I should delete ASPNeT account first and run the script but still didn't help
- when I view http://localhost on IE I can view the ASP home page without any problem but Firefox asks me to enter user name and password.
Does anyone know of any requirements to get the Ajax Control Toolkit (Calendar Extension in particular) working in this OS? I have it working on my local macjine (VS 2010 Development Server) but it doesn't work when published to my Virtual Server running Windows Server 2008 R2. No errors are reported, just nothing happens when I give focus to the Calendar textbox (no Calendar appears).Anyone know of any configutrations that need to be made in Windows Server 2008 R2?Is there a 32-bit/64-bit issue with the Toolkit?
View 8 RepliesI have the following in my web.config file:
[Code]....
When I reference a page that does not exist (for example,http://example.com/doesnotexist.aspx) I still get the standard white 404 error page "The resource cannot be found." rather than getting redirected to error404.aspx page that I specified. On unhandled exception, the page does get redirected correctly to error.aspx, just not when it is 404 error. For some reason IIS always pre-empts ASP.NET worker process from processing the 404 errors
I developed an application using VS2010 and now when i try to deploy it on windows XP maching running IIS 5.1 i get the database version error which says:
The database '<database file path>' cannot be opened because it is version 655. This server supports version 612 and earlier. A downgrade path is not supported.
<database file path> . Create is aborted.
An attempt to attach an auto-named database for file <database file path> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
i am trying to deploy the asp.net web application on windows 7 professional
i was getting error at <authentication mode="Windows"/>
if i commented the windows authentaction i get below error
Server Error in '/' Application.
--------------------------------------------------------------------------------
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load type 'crmpark.Login'.
Source Error:
Line 1: <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Login.aspx
i have aslo commented
[Code]...
Net Framework 2.0 Net Framework 3.5 and above, but not addobjects that I use when I use ajax added. Why can not I add the NetFramework 2.0.
View 1 RepliesI'd installed newly Visual Studio 2010,and i want to create a new local website on my iis server and i follow these steps:
1-from my iis i create a virtual directory
2-in command promt i execute these commands:
aspnet_regiis -i
aspnet_regiis -ga aspnet
3-i go to VS2010 and create a new website (HTTP) and choose my created Virtual Directory has been built in previous step
Now if i do step 3 with framework 4 i don't have any problem but with framework 3.5 my website hasn't been run and says me : "Unable to start debugging on the web server.The web server is not configured correctly. See help for common configuration errors. Running the web page outside of the debugger may provide further information."
Is it possible to get google analytics to work in an admin section? so it will be implemented in the website.
how do you do this?
I am getting above error when I executing a method of Dll in VS 2005 and DLL is made in VB6 which is interoperable . I am unable to trace the error .
View 1 RepliesI am using URL routing in asp.net application (not MVC) . I have Admin folder in my aaplication which has admin related aspx pages with seperate web.config. I have seperate login form for admin users which is placed in admin folder itself. My issue is whenever I hit [URL] (which I want to go to login form for admin)- it tries to authenticate and goes to login url mentioned in web.config of root folder.
Note: Admin folder has anonymous access in root config file. Also I have set default document in config of Admin folder. I have added following line in global.asax so that routing doesnt work for files in admin folder;
routes.Add(new
Route("admin/{*resource}",
new
StopRoutingHandler()));
I am really confused what is the issue? What I am missing?