Configuration :: Windows Service Not Working After Using Installation Setup?
Jan 27, 2011
am using a windows service created by me it works fine in debug mode.I have created a setup for installation of windows service and installed it on the same machine.For testing i am creating a notepad file in c:\temp123.txtIts working gr8 in debug mode but not working when installed using a set up . also i have used same set up on another machine.Its not working thr as well.What can be the reason.Note:- two weeks back i have checked it using installer on another machine it was working, but suddenly now its not working any where.
I want to include installation and registration of Widnows Service in Web Setup. (During Web Site Setup Windows Service also Install and Register on a client machine)
I have 2 machines on a domain. The first machine has IIS 6. 0 inatalled on it, whereas the second machine has published web content.
On the local machine ie. Web server i have configured the website like "A Share located on another computer" Eg: //Machine2/Application1. The pubished web content is inside a shared folder on the remote machine. Finally when i run the application in browser(IE 7.0) i get the following error.
Server Application Unavailable
The web application you are attempting to access on this web server is currently unavailable. hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. review this log entry to discover what caused this error to occur.
The Error in the Windows event viewer is as follows:
I just downloaded and installled the Microsoft Windows Azure SDK yesterday for the first time and I am having issues running the application as I all I am getting is 503 errors. I run Windows Server 2008 R2 on my development machine and even tested it on another co-workers 2008 R2 and couldn't even compile the application. He got this error instead "A problem occurred while trying to set the "References" parameter for the IDE's in-process compiler. Error HRESULT E_FAIL has been returned from a call to a COM component."
From within my Windows Server 2008 R2 Hyper-V Virtual Windows 7 x86 enviroment, I was able to successfully build and run the Windows Azure SDK and it even showed the base ASP.NET application.So my question is, does the Windows Azure SDK for Visual Studio 2010 w/ Visual Studio 2010 SP 1 installed not work under Microsoft Server 2008 R2?
I want to execute my asp.net application where Windows XP Service Pack 3 is installed + VS 4.0 framework is installed and IIS 5.1 is installed. The program is not running yet. It shows me an erro message that "Server is unavailable" Is it possible to run the application on this machine. I also tried aspnet_regiis -i and -c command
i finally got vwd to work as an admin(windows 7) but now i get the error screen below:
Where can i find these, i went to add/remove programs, windows features, and there is only one box checked for ii6, no other options, no "Windows Authentication". Can I get these items somewhere else? I didn't see them on iis web site either.
I try to install vistual 2005 on Win 7 On meantime I have net1.0 sp3 developer ;net Framework 2.0 , Microsoft Device Emulator version1.0 -ENU,Microsoft Visual J#2.0 Redistributable Package( can I uninstall This package)the studin 2005, but when I try to install the update (VSBsp1-KB926747-x86-INTL) i get hte error:The update patch cannot be installed by the Windows Installer service because the program to be updated may be missing, or te upgrade patch may update a different version of the program, verify that the program to beupgraded exists on your computer and that you have the correct Upgrade patch how to deat with this problem??
I have a visual studion 2010 solution with two projects
1 . A class libarary
[Code]....
2. A windows service application
[Code]....
The service application is used to convert .dbf files to xml. The convertion is done using the classlibary project wich is called by the windows service application. This class library project has some values hard coded. like the path to look for the .dbf file
I want to make these hard coded values changable. like moving them to an app.config file. To which project I have to add the app.config file (classlibary or windows service)? How can I use the value from configuration file in classlibrary ?
My overall goal is just to get the logged on users information for an Intranet site I'm developing without them providing their login (since they are already logged into their computer). So far I just get 401.1 errors and it keeps asking for my login/password. Even though I provide my login/password, it still won't let me in.
I've Enabled Windows Authentication from IIS > Sites > Default Web Site, added this to my web.config:
I've encountered a problem while installing Visual Studio 2010 on Windows 7, I've tried to modify the privileges of the destination folders to no avail, I've also tried to delete everything related to it with a removal tool. The problem is that the installation is always unsuccessful at the same point, providing me a Blue Screen of Death (twice) and the following error message (infinite amount of occasions):
[Code]....
Does anybody know the cause of the error? Is there an easier and less time consuming solution than reinstalling the whole system?
I am working with desktop application with VB.NET 2.0 , now i want to create a setup for my project to install it at a clients place, I have to include the Framework 2.0 so that it will be installed with the setup . describe the steps to make a setup of the projects so i will be able to make a setup of my projects
I have created a MSI file for my windows service but at the time installtion it is prompting set Service login for login name, Password and confirm password. So I am not able to install that service.
i have created one windows application in c# .net and its working fine in windows xp, but when i try to install the setup in windows 7 or vista,the setup never runs.. should i have to write some code for it.
i need an intaller program that allows me to write code(c# or vb.net) to be executed during the installation. the reason is that i want to check if the current account does have writing permission or not. if she is not then the installation should get aborted. also the installer should create a default uninstaller.
if you specify many it would be great so i can look for them in the market since not every software available here.
i have created a pluIn(setup) for IE. this plugin add in IE addOns.this pluIn(setup) installation and uninstallation is working perfect. now i want use a webservise that check version of my computer plugin and server computer plugIn(setup).if both version are different then ask for updation of PlugIn(setUp).if i click on yes then it update my end PlugIn(setup).
Give me a link that explains step by step to create a setup of both windows and webapplication along with database.For database while installing it should check whether SQL SERVER is installed and also check the version.
I have a web app and a web setup project in VS2010. By default, when I install my web app using my web setup project, in the Installation Address folder dialog window, the default Application Pool is DefaultAppPool. It has been stated in the MSDN documentation that we can change this default TARGETAPPPOOL, say to "ASP.NET V2.0". Here is the excerpt from MSDN... "The Application Pool list shows the available application pools on the target computer, and the default setting is named DefaultAppPool. To change the default application pool in your Web setup projects, you can use a post-build action to update the name of the application pool in the MSI." Is there anybody in the group knows the syntax on setting the TargetAppPool to another pool that exists in IIS, e.g., ASP.NET V4.0 CLASSIC?
I have developed a website using visual studio. Now i want to deploy the same on server having windows server 2008 o.s. and IIS 7. When i copy the website and paste it into wwwroot folder of iis its not working. What settings need to be done so that website can be accessed from iis.
I have a framework 2.0 AJAX app that was moved to Windows 7 2008 R2 server with II7. The application pool is set to 2.0 for the website, but its always looking for this assembly. Everything I've read says you do not install AJAX 1.0 Extensions on Server 2008? Since this IIS is not mine, I'm trying to be cautious. Should I install the extensions, or is there some server setting Im missing??
Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 29: <compilation debug="true"> Line 30: <assemblies> Line 31: <add assembly="System.Web.Extensions, Version=1.0.61025.0, Culture=neutral,[code]...
We have a website portal hosted in Windows 2003 server. For security reasons we are using different windows Login user say (xxxx) for signin other than Administrator. Now with this user (xxxx) name I installed .net Windows Application. It was working fine. For some reasons I renamed the original windows Login user(xxxx) to different say (yyyy). Now this .net Windows Application is not working with (yyyy) and even it is not allowing me to uninstall it.
I made Web Setp Project for a web application, I need to change virtual directory property for the web application.
This virtual directory is linked to TARGETVDIR property which is disabled in the property grid.But I need to control it, I searched for this and I found that the only way is to use orca.exe and change msi using it.
Can I amke another solution to avoid making modification on nsi after build???