Configuration :: Custom 404 Error Page Does Not Work

Oct 3, 2010

I have the following in my web.config file:

[Code]....

When I reference a page that does not exist (for example,http://example.com/doesnotexist.aspx) I still get the standard white 404 error page "The resource cannot be found." rather than getting redirected to error404.aspx page that I specified. On unhandled exception, the page does get redirected correctly to error.aspx, just not when it is 404 error. For some reason IIS always pre-empts ASP.NET worker process from processing the 404 errors

View 1 Replies


Similar Messages:

Configuration :: How To Setup A Custom 404 Error Page

Aug 2, 2010

tried to do a search on this, but it kept timing out on me, so sorry if this has been answered before.In IIS7, I've setup a custom 404 error page, which works if you go to a document, but not if you go to a directory...

View 2 Replies

Configuration :: Custom Error Page Not Showing?

Jan 27, 2011

I have implemented a custom error page in my asp.net application. In the ASP.net configruation I have

CustomErrors
defaultRedirect="~/ErrorPages/error.aspx"
/>

but when I attempt to cause an error on my application, I still get the generic asp.net error instead of my custom page.

View 2 Replies

Configuration :: Web Form Routing And 404 Custom Error Page?

Jan 28, 2011

I have a problem with my site, and I'm using .net 4, web form routing

I have this route ,routes.MapPageRoute("JobPreview", "jobs/{jobId}/{pg}/{Position}", "~/default.aspx")

so, this page is working fine
http://www.jobsagents.com/jobs/24651/1/automation-qa-engineer

If we remove the last segment of this url, it should be redirected to the custom 404 not found page, but in the deployment server it redirects to the default IIS error page for 404 errors

http://www.jobsagents.com/jobs/24651/1/, on my local machine it's ok, and shows my custom error page.

If we remove the last three segments of the url
http://www.jobsagents.com/jobs it works fine on the deployment server.

View 1 Replies

Configuration :: Create A Custom Error Page In Web.config File?

Apr 14, 2010

If I create a custom error page in my web.config file, how do I retrieve error details in the error page?

So with ...

<customErrors mode="On" defaultRedirect="/error/error.aspx">
<error statusCode="404" redirect="/error/404.aspx" />
</customErrors>

I am referring to errors generated by my asp.net. For example I created a sample page and wrote 'throw new Exception("some error")' as a test. How can I retrieve an instance of the exception or exception details in my "/error/error.aspx" page? Currently in my error page if I query Server.GetLastError() the return value is null.

View 6 Replies

404 Custom Error In IIS 6.0 And Language Does Not Work

Oct 5, 2010

I've created a 404 error page called 404.aspx which works fantastic when I call it manually.But after setting the "custom error" in web.config and IIS 6.0. It doesn't work properly.for example, If I type the URL the wrong way, it won't work and a message like the one below,

Location: **http://domain/anything** (without an extension)
Line Number 1, Column 2:<%@ page language="C#" masterpagefile="~/Public.master" autoeventwireup="true" inherits="_404, App_We
?</textarea></p>
<input type='hidden' name='ID[1]' value='199797' />
<input type='hidden' name='URL[1]' value='http://stackoverflow.com/questions/5047449/iis-overriding-custom-404-error-page-in-asp-net' />
<input type='hidden' name='CAT[1]' value='ASP.NET' />
<input type='hidden' name='BOARD[1]' value='stackoverflow' />
<input type='hidden' name='P_DATE[1]' value='Feb 18 at 22:57' />
<input type='hidden' name='RANDOM[1]' value='acx2qwxlK' />
<input type='hidden' name='REPLIES[1]' value='1' />
[code]...

with no .aspx then IIS7 takes matters into its own hands and I get the lovely error page that IIS7 comes with. The goal is that the site redirects with only a 404 status code (so not a 200, or a 302 redirect). ..but htere is no data coming out

View 2 Replies

Get A Custom Error Page To Mail The Error Message / Generate A Custom Error Page With The Error Message

Feb 7, 2011

I was wondering if someone could point me in the right direction:

How do I generate a custom error page with the error message and get it to mail me that error message?

Is there a good tutorial out there that someone could point me 2.

View 4 Replies

MVC :: Error In Subview Master Page Not Show The Custom Error Page On Entire Page ?

Oct 28, 2010

I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..

[CODE]...

Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?

View 4 Replies

Installation :: IIS Configuration - Vwd To Work As An Admin(windows 7) - Get The Error ?

Mar 26, 2010

i finally got vwd to work as an admin(windows 7) but now i get the error screen below:

Where can i find these, i went to add/remove programs, windows features, and there is only one box checked for ii6, no other options, no "Windows Authentication". Can I get these items somewhere else? I didn't see them on iis web site either.

View 3 Replies

Web Forms :: Handle Custom Errors Using Custom Error Page?

May 7, 2015

I want put custom error page in my website so I wrote below code in web.config

<httpErrors errorMode="Custom">
<remove statusCode="404" subStatusCode="-1" />
<error statusCode="404" subStatusCode="-1" prefixLanguageFilePath="" path="error-404.aspx" responseMode="ExecuteURL" />
</httpErrors>

is it correct?

or I should put other code?

View 1 Replies

Configuration :: Custom Error Pages Not Working?

Jan 27, 2011

Can anyone send me proper configuration settings in web.config for ASP.NET 4.0. I am unable to redirect pages to desired url on page not found. It seems there are changes in properties as compared to previous framework.

View 2 Replies

Getting Redirection To Custom Error Page Using Custom Errors

Mar 24, 2010

Here's my Application_OnError event sink in global.asax.vb:

Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Dim fourOhThree As Integer = DirectCast(HttpStatusCode.Forbidden, Integer)
Throw New HttpException(fourOhThree, innerMostException.Message, innerMostException)
End If
End Sub

You'll see that if we've got an innermost Exception of type AccessDeniedException we throw a new HTTPExcpetion with a status code of 403 AKA 'forbidden'

Here's the relevant web.config entry:

<customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On">
<error statusCode="403" redirect="~/Secure/AccessDenied.aspx" />
</customErrors>

So what we're expecting is a redirect to the AccessDenied.aspx page. What we get is a redirect to the ServerError.aspx page.

We've also tried this:

Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Context.Response.StatusCode = DirectCast(HttpStatusCode.Forbidden, Integer)
End If
End Sub

Which unsuprisingly doesn't work either.

View 1 Replies

Security :: Configuration Error From Custom Profile Provider

Jun 3, 2010

I'm still trying to learn how all of this works, and I apologize if this is a simple fix, but I'm getting frustrated and I could use some help.

I found an XML profile provider that I'm trying to use, and when I set it up, it works fine on my local machine. However when I upload it to the server, I get an error and I don't really know what it means:

Server Error in '/' Application.

Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: CustomProviders.XmlProfileProvider..ctor()

Source Error:

[Code]....

Source File: E:kundenhomepages28d241331304web.config Line:
38

The full profile section from the web.config file is:

<profile enabled="true" defaultProvider="XmlProfileProvider">
<providers>
<clear/>
<add applicationName="FamilySite" name="XmlProfileProvider" type="CustomProviders.XmlProfileProvider"/>
</providers>
<properties>
<add name="FirstName" />
<add name="LastName" />
<add name="HomeTown" />
<add name="ShowEmail" type="System.Boolean"/>
</properties>
</profile>

View 2 Replies

IIS Configuration :: Show Custom Error Message When Website Is Under Maintenance

Sep 17, 2012

How to show page Error msgs wen user tries to open the page , while tat page is under uploading on the sever?

View 1 Replies

Web Forms :: Session_Start Executes Again After An Error Occurs (when Going To Custom Error Page)

Mar 7, 2011

I'm having a wicked time trying to redirect the different error scenarios to a custom error page. Basically, I have put some code in Application_Error in global.asax, and done the necessary web.config settings to use Custom Errors.

In global.asax on Application_Error, I stored the Server.GetLastError in Session. The reason I have to store it in Session is because (as far as I know) you lose the exception when using "ResponseRedirect". And the reason I have to use ResponseRedirect is because I am using an UpdatePanel with AJAX calls, and any exception during the AJAX call shows up as a JavaScript error, and doesn't get handled using the custom error page (see this post).

void Application_Error(object sender, EventArgs e){ ////must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { Session["LastException"] = Server.GetLastError(); } else { // (I think this happens when there are compile-time errors) Server.Transfer("~/Oops.aspx"); }}void Session_Start(object sender, EventArgs e){ //must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { //initialize the session (http://forums.asp.net/t/1405077.aspx) Session["LastException"] = ""; }}

View 3 Replies

Web Forms :: Display Complete Exception Details And Error Message On Custom Error Page

Jul 2, 2012

I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.

---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------

And even i tried in Global.asax page in Application_Error() method like below

 Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();

And in my Error.aspx.cs page i have placed a label and i have written code like this

protected void Page_Load(object sender, EventArgs e)         {
         Label1.Text=Request["errmsg"];
      }

But it is not getting redirected my error page and not displaying anything on it.

View 1 Replies

Configuration :: Not Displaying The Custom 404 Page Instead It Display The IIS6 404 Page

Dec 3, 2010

I set my web.config with a custom error for 404 and 403 response but when I try to navigate my page (not exist page). It displays the default IIS6 404 page instead of my custom page...


[Code]....

View 5 Replies

Custom Error Page For Http Error 503 / How To Fix It

Feb 16, 2010

I need to send a Customized Error page for 503 Errors produced by my asp.net website. I have tried to simulate the condition by switching off the application pool (doesn't work) and by flooding my application with requests. Even though IIS sends me the default 503 error page, and even though I have tried setting a Custom URL in IIS and ASP.NET for this error code, it still returns me the default 503 error page.

View 3 Replies

Configuration :: IIS Connection Limit - Custom Page

Feb 16, 2011

ASP.NET 4 - IIS 7

I would like to limit the number of connections to one of my website.What I want to do specifically is show the visitors a simple custom page warning them that the site is too busy and they should come back later.I know if I limit the nbr of connections in IIS it'll work but It doesn't show an elegant page.

View 1 Replies

.net - Disabling Authentication For A Single Aspx Page (custom Error Page)?

Mar 29, 2010

I am using a custom error page in IIS 6:<customErrors redirectMode="ResponseRedirect" mode="On" defaultRedirect="Error2.aspx"/>I want to disable authentication for the custom error page because the error being raised is related to an authentication module and I don't want to get into an infinite loop and I want to display a clean error page to the user. I have been trying the following configuration to do that.

<location path="Error2.aspx">
<system.web>
<authentication mode="None"/>

[code]...

View 3 Replies

Displaying Custom Error Page From A Nested Master Page Using Mvc

Oct 27, 2010

I am showing Custom Error in my page.. if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page. Please I am attaching the Screen shot. how to show the Error page on entire page if something happend in any where submaster or other page.. Here is the code that I am using in web config file to show custom Error page..

<customErrors mode="On" defaultRedirect="~/Home/Error">
<error statusCode="403" redirect="~/Home/Error" />
<error statusCode="404" redirect="~/Home/Error" />
</customErrors>

master page I have all the js files and Css files links and I have submaster page for mainmaster page.. sub master page have three tabs each tab has grid control.if something went wrong I can able to show the Custom Error page but its showing me in submaster page.. not in main master page.....but if something hapend any where I need to show CustoM Error page in main master page..

View 1 Replies

How To Retrieve The Referrer Page Url Once A Custom Error Page Is Returned

Sep 9, 2010

I'd like to capture the http referrer url following the rendering of a custom error page.I have this set in my web.config

<customErrors mode="On">
<error statusCode="500" redirect="/StaticError.aspx" />
</customErrors>

In the OnLoad(EventArgs e) event -- I'm trying to do this, but it appears to be too late.this.txtReferrer.Text = Request.UrlReferrer.ToString();Is it possible to capture the referrer url?

View 1 Replies

Getting Forms Authentication To Use 403 Custom Error Page Instead Of Login Page

Nov 19, 2010

I've a got an Asp.Net site that is using Forms authentication, I've also got custom errors configured in the web.config. One of these is a special error page for 403's (access denied). My question is how do I get Forms authentication to work smarter?

I would like Forms authentication to send users to login page only if they are not authenticated. If they are I want it to defer to the custom error pages that i've defined in the web.config. This seems like something very basic, how can this be achieved?

[code]....

View 1 Replies

Custom Server Controls :: Custom Validator Client-side Validation Cannot Work?

Jan 13, 2010

I've been trying to get a custom validator component working that ensures at least one checkbox from a checkboxlist has been checked. I've been used some code I found on dotnetjunkies.com but the client-side validation didn't work. I've been attempting to modify it to get the client-side javascript validation to work with no luck. Basically, I compile the below code into a DLL and add it to my bin folder.

[Code]....

View 2 Replies

IIS Configuration :: Crystal Reports Work On Local Machine But When Upload It Does Not Work In VS2010

Apr 27, 2016

I have created a crystal following your article which url is 

[URL]

It is working fine on local machine but when i upload it on the server it is not working. Crystal Report is showing but data is not showing in the crystal report.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved