I am using making application asp.net 2.0. In my page there is Data List which is having two buttons. When user click on the button it is doing some process and taking some time. Due to that user some time click twice and it will make problem in application. So to stop that I wanted to show progress bar until button click process done.
View 6 Replies
I have a web page and i have one user control and one buttone on page...
I am displaying some data on that page.
But problem is that buttong is loading after almost 30 to 40 seconds event after whole data displayed and progress bar of ie is also does not complete
I am making some application in asp.net 1.1 in that I am displaying data in datagrid from database. In data grid first column is of check box and radio button and in the last column we have text box now thing is that when i click on check box crosponding textbox we fill some figure and at the end we press calculate button to get total. After getting total we have to press continue button to go next step
But suppose if some body remove that check the we should press calculate button or chnage some figure in the text box then we should press calculate button again to recalculate. for that i kept autopost back on check box oncheckedchanged event and text box ontextchanged event and hide continue button so user will click calcutae button abd then continue button will re-apper
Problem it that it taking too much refresh and taking long time. So was lloking for some ajax method to use in my application.
I need to render a particular partial view multiple times inside a view whenever user perofrm an action like button click event.How we do it in mvc?
i want disable button at process time for that i am using this code at page_load event
System.Text.StringBuilder sbValid = new System.Text.StringBuilder();
sbValid.Append("if (typeof(Page_ClientValidate) == 'function') { ");
sbValid.Append("if (Page_ClientValidate() == false) { return false; }} ");
sbValid.Append("this.value = 'Please wait...';");
sbValid.Append("this.disabled = true;");
sbValid.Append("document.all.btnSubmit.disabled = true;");
//GetPostBackEventReference obtains a reference to a client-side script function that causes the server to post back to the page.
sbValid.Append(this.Page.GetPostBackEventReference(this.btncod));
sbValid.Append(";");
this.btncod.Attributes.Add("onclick", sbValid.ToString());
but when i used this button is disable but not going at onclick event
I have the next problem: I need to process only 1 request at a time from each user. Lets assume that server identifies each user be UserID, sent in query string.cHow can make the server work the way like FIFO (do not start processing next request until the previous is fully processed)? Should I use the named mutexes inside HTTP handler and assign the name to mutex by UserID?
View 1 RepliesWe need assistance with a portion of a major web application project scheduled to begin user testing within 10 days. The troublesome part of the code calls an external application when a button is clicked in Web page. When run from a command prompt or bat file, the external application, App.exe, runs perfectly producing the desired result. We created a test page and a small console application, Con.exe, to test the button code with a known quantity. The test application runs perfectly when the button in the Web page is clicked. However when we change the code to run App.exe instead of Con.exe, the App.exe code will not execute. We even tried creating a bat file to execute App.exe. Like the exe, the bat file executes from the command prompt or when double-clicked,but fails to run when called as a process from the button click event. Can anyone assist us? Here is the C# code: (.Net 3.5 sp1)
using System;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Linq;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.HtmlControls;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Xml.Linq;
using System.Diagnostics;
namespace WebButtonTest
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
protected void Timer1_Tick(object sender, EventArgs e)
{
int checkNumber = 0;
if (Session["checkNumber"] != null).......
[Code....]
I have a gridview on my page. I have a checkbox in each row of this gridview. For each checkbox in the gridview, I'd like to update my table accordingly, but I don't want them to have to hit a submit button every time they check the checkbox. I want them to check all the boxes they need to and at the end, they should hit one submit button.
View 12 RepliesI created a gridview and bound it to a datasource, I had some problems that do not relate to this post.
then I created another datasource programmatically and deleted the old one,
and I bound it using gridview.DataSource = source.
now when I click the edit button the first time nothing happens, when I click edit on another row, the previous row I clicked on changes to editing mode and shows update cancel links, then when I click a 3rd one, the 2nd one changes to editing mode etc...
i have link button at last of page when user click on link button it clicks more data.
what i want is when user reach on bottom so load more button click automatically.
Issue:
As my pages are taking time to load first time.
So user has to wait till full page gets loaded and thats irritating . Was this the reason MVC was evolved?
Solution :Should i use partial rendering on all pages including home page, and all forms getting called from home page.
So even if half page is loaded thats less frustrating
For Partial rendering what i plan is : i will put Scriptmanager with Enable partial renderingand update panel for half part of page.
So that user dont have to wait for full page to load.
Is my plan correct? Problem is i cannot regenerate page load issue every time.
[Code]....
[Code]....
The whole thing is in a form, and it doesnt postback when this button is clicked. Im no good with javascript, but i got a feeling thats not the problem.
when i am runnig the project, the crystal report(rpt) file will taking too much time for loading on first time... any one please help me to avoid the time delay for loading the rpt file in first time .
View 2 RepliesI have a link button in a repeater control. the li element is drag and droppable using jquery. when the page loads the the link button works perfectly, the jquery that is attached and the server side code both execute. when I perform a drag and drop then click on the link button it doesnt not fire. when i click it a second time it does fire. If i perform 2 or drag and drops in a row the link button doesnt fire a as many drag adn drops as i before it will fire. for example if if perform 3 drag and drops then it will take about 3 click before the events are fired.
[Code]....
I have a button within a TabPanel and i have a button click function written in Jquery that is not executing when i click the button. If i remove the tab panel and container it works, but i would like to use the tab panel/container functionality. See code below:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<%@ Register assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" tagprefix="cc1" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
[code]...
I have a LoginView element in an Update panel and use JQuery to hide the div containing the update panel when the cancel button(Html) is clicked.
It works fine normally. However, when I enter an invalid password and there is an error message displayed, the Javascript attached to the Cancel button click stops firing.
[code]....
I am new to Jquery and having trouble using ui-tab control. Thanks for helpI am able to initialize to tab 4 on page load.If I select a different tab and then click the edt button I want the new tab to remain selected. What actually happens is that tab 4. gets re-selected.
Protected Sub btnEdit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnEdit.Click
Session("DealSheetMode") = "Edit"
ManageVisibility(Session("DealSheetMode"))
PopulateEditPanels()
Page.ClientScript.RegisterClientScriptBlock(GetType(Page), "TabScript1", "SelectTab();", True)
[code]...
How to call a function on run time button click. As I have created a table and a button on run time and want to call a function on its click on code behind page(.cs page). It is in Asp.net with c# my code full details is like
strhtml = strhtml.append(<button id=btnclick, runat='server',onclick=testfunction''></button>);
2) my function is on same page like
testfunct()
{
xyz;
}
now i want to call this function on click of button
i use asp.net and ajax
I have a button and I want to count that, how many times was the button clicked in 1 minute.if the user clicked the button more than 5 times in 1 minute it will be deny for 5 minute.
I have written a user control that captures some user input and has a Save button to save it to the DB. I use a repeater to render a number of these controls on the page - imagine a list of multiple choice questions with a Save button by each question.
I am loading the user control inside the repeater's ItemDataBound event like this (code simplified):
[code]....
The problem is that when the Save button is clicked, the page posts back, but lbnUpdate_Click is not called. The Page_Load event of the page itself is called however.
I should mention that the repeater is part of a user control, and that user control is loaded inside another user control (this is a DotNetNuke site which makes heavy use of user controls). The Save button link looks like this:
javascript:__doPostBack('dnn$ctr498$AssignmentsList$rptAssignments$ctl04$ctl00$lbnUpdate','')
So I have a text box and a button, once the user types something in the text box, and then click button, I posted the typed text into a div control on the same page.Now my problem is that, the text box appears to have the typed text, how to resolve this type of issue? I don't want to redirect users all the time after they click the button.
View 4 RepliesI used to send sms to many . but not working below are my code
sending sms one time
under button click
try {
//for loop
for (int i = 1; i < 11; i++) {
send("9786629228", "pwd", txtmessage.Text, txtnumber.Text);
[Code] .....
I've got a .net button that has an href attribute value set to
javascript:WebForm_DoPostBackWithOptions(new WebForm_PostBackOptions("ctl00$cp1$ucInvoiceSearch$btnSearch", "", true, "", "", false, true))
I've got a textbox that when I press enter I want it to fire this event. Doing the 'Enter' event isn't an issue but I can't get the event on the href to fire using .click(). Here's my function so far:
$("[id*='tbInvNo']").keyup(function(event){
var $btn = $(".pnl-invoice-search");
if(event.keyCode == 13)
$btn.click();
});
Iam working on VWD express 2010, and things were going well, when the VWD crashed.I recovered my work and and realized that my controls stoped firing events.I removed and added button again, but in vain. I set "AutoEventWireup" and reset it also, but no use.I changed the code onto multiple systems. But the events wont fire. (I kept breakpoints also) My Web.config looks like this
[Code]....
And my page directive looks like this
[Code]....
And the non working code bit is this
[Code]....
I have List (of class). having 1800 of count and each object has 90 properties. When I terate earch with 90 properties taking more and more time. How to resolve this
Dim cellIntStyle As HSSFCellStyle = hssfworkbook.CreateCellStyle
cellIntStyle.DataFormat = HSSFDataFormat.GetBuiltinFormat("#")
Dim cellDateStyle As HSSFCellStyle = hssfworkbook.CreateCellStyle
cellDateStyle.DataFormat = HSSFDataFormat.GetBuiltinFormat(Format
("dd-MMM-yyyy"))
For Each mReport As Report In dtExcel
row = sheet1.CreateRow(iRow)
j = 0
For Each prop As PropertyInfo In props
Dim value As Object = prop.GetValue(mReport, Nothing)
If IsInt(value) Then
CreateRow(row, j, CType(value, Integer), cellIntStyle)
ElseIf IsDate(value) Then
CreateRow(row, j, String.Format("{0:dd-MMM-yyyy}",
value), cellDateStyle)
Else
CreateRow(row, j, value)
End If
j = j + 1
Next
iRow = iRow + 1 // Coming here taking so long... how to make it fast.
Next
Private Sub CreateRow(ByRef row As HSSFRow, ByVal colId As Integer,
ByVal value As String)
row.CreateCell(colId).SetCellValue(value)
End Sub
Private Sub CreateRow(ByRef row As HSSFRow, ByVal colId As Integer,
ByVal value As Integer,
ByVal cellStyle As HSSFCellStyle)
Dim cell As HSSFCell = row.CreateCell(colId)
cell.SetCellValue(value)
cell.CellStyle = cellStyle
End Sub
Private Sub CreateRow(ByRef row As HSSFRow, ByVal colId As Integer,
ByVal value As String,
ByVal cellStyle As HSSFCellStyle)
Dim cell As HSSFCell = row.CreateCell(colId)
cell.SetCellValue(value)
cell.CellStyle = cellStyle
End Sub
