Im facing Anonymously Hosted DynamicMethods Assembly error when i use OrderByDescending() LINQ function on my IQueryable object but when i remove the OrderByDescending() then it works fine. What is the resolution of this problem
View 2 RepliesI have recently discovered that I am affected by this bug http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71515.html
Well,at http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71529.html they say the work around is to create a global policy assembly and redirect the assemblies that way since it is not read from the web.config.
How do you actually do what they describe there? There is a huge documentation gap in that area with Mono.Also,I can't just recompile the assembly to use the new Mono assembly versions because the assembly is closed source.(but it does work with Mono.)
Im developing a new web application where i need to insert data into the tables(Main table ,Child table1,Child table2) taking Main table id im inserting the child tables....the problem where i got structed is when im inserting data from tha application to databse they are inserting properly but when im inserting through hosted application(which is hosted in IIs) im getting error i.e only main table is getting inserted....but the child tables are inserted..
View 3 RepliesI have an ASP.Net site using Forms authentication. One of the aspx pages loads a WinForms user control hosted in IE. That control must connect with a WCF service located in the same ASP.Net web site.How can I make the WCF service secure? Currently I have set the WCF service to use AspNetCompatibilityRequirements mode but the user control hosted in IE can't connect to the WCF service as it isn't logged in.
View 1 RepliesI have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.
View 1 RepliesI receiving an error when sending email from an asp.net page on a hosted server. Below is the code and error;
MailAddress from = new MailAddress("email@home.com");
MailAddress to = new MailAddress('ToMe@something.com");
using (MailMessage message = new MailMessage(from,to))
message.Subject = "Something";
message.Body = "Something is the body";
[code]...
I deplyed a mvc 2 site on a shared server with IIS6. All the pages are working except for the homepage. This is
[Code]....
And the routes:
[Code]....
The [URL] works, the [URL] throw a 403 error and says:
[Code]....
After login when i logout after 10 minutes my web application gives error (Hosted on iis):
Site URL is www.shoppersonlinecub.com login Id :admin@gmail.com
And Password: 1234 ( on logout it gives error).
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
Unable to understand the error.
When I am trying to call a service hosted in Java through .net I am encountering the below error
"WSE839: An HTTP response was received that used the following content type: text/xml; charset=utf-8. The following content type was expected: multipart/related; type=application/xop+xml."
I am using WSE 3.0 for configuring MTOM.
[Code]....
I double checked that my hosting account is running asp.net 2.0-3.5.
Regarding this example: [URL] .... it works locally, within VS 2012.
But when I publish to a local or remote webserver, it doesn't show an error, but the dropdown lists are populated with this line: [Method Error: 500].
I see a message on:
winform control hosted in IE, FileIO security exception.
I have got the same problem, which I cannot figure out what is the solution for weeks.
I have Windows 7 (Home premium edition), framework 3.5 (how can I check that, if gacutil is correct version, if it metters, anyway ...)
I am writting on C#.
Also on assemblyInfo.cs :
[code]....
I am getting the following error when I try to build an ASP.NET 4 project in Visual Studio 2010: "Could not load file or assembly 'file:///C:Devproject runkinElmah.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)". I have verified that the dll does, in fact, exist, and is getting copied to the bin folder correctly. I have also tried removing and then re-adding the reference to the project.
The build only fails when I switch the Solution Configuration to "Release". It does not fail when the Solution Configuration is set to "Debug". The only difference between the two configurations (that I know of) is shown in the following Web.config transform, Web.Release.config:
<?xml version="1.0"?>
<configuration xmlns:xdt="[URL]">
<connectionStrings>
<add name="SqlServer" connectionString="" providerName="System.Data.SqlClient" xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/>
</connectionStrings>
<system.web>
<compilation xdt:Transform="RemoveAttributes(debug)" />
<customErrors mode="On" xdt:Transform="Replace">
<error statusCode="404" redirect="lost.htm" />
<error statusCode="500" redirect="uhoh.htm" />
</customErrors>
</system.web>
</configuration>
I have tried using Fusion Log Viewer to track down the assembly binding issue, but it looks like it is finding and loading the assembly correctly. Here is the log:
*** Assembly Binder Log Entry (6/8/2010 @ 10:01:54 AM) ***
The operation was successful.
Bind result: hr = 0x0. The operation completed successfully.
Assembly manager loaded from: C:WindowsMicrosoft.NETFrameworkv4.0.30319clr.dll
Running under executable c:Program Files (x86)Microsoft SDKsWindowsv7.0AinNETFX 4.0 Toolssgen.exe
A detailed error log follows.
Pre-bind state information ===
LOG: User = User
LOG: Where-ref bind. Location = C:Devproject runkinElmah.dll
LOG: Appbase = file:///c:/Program Files (x86)/Microsoft SDKs/Windows/v7.0A/bin/NETFX 4.0 Tools/
LOG: Initial PrivatePath = NULL
LOG: Dynamic Base = NULL
LOG: Cache Base = NULL
LOG: AppName = sgen.exe
Calling assembly : (Unknown).
LOG: This bind starts in LoadFrom load context.
WRN: Native image will not be probed in LoadFrom context. Native image will only be probed in default load context, like with Assembly.Load().
LOG: No application configuration file found.
LOG: Using host configuration file:
LOG: Using machine configuration file from C:WindowsMicrosoft.NETFrameworkv4.0.30319configmachine.config.
LOG: Attempting download of new URL file:///C:/Dev/project/trunk/bin/Elmah.dll.
LOG: Assembly download was successful. Attempting setup of file: C:Devproject runkinElmah.dll
LOG: Entering run-from-source setup phase.
LOG: Assembly Name is: Elmah, Version=1.1.11517.0, Culture=neutral, PublicKeyToken=null
LOG: Re-apply policy for where-ref bind.
LOG: Where-ref bind Codebase does not match what is found in default context. Keep the result in LoadFrom context.
LOG: Binding succeeds. Returns assembly from C:Devproject runkinElmah.dll.
LOG: Assembly is loaded in LoadFrom load context.
while running my project its shows an error like this:
Error 1 Could not load file or assembly 'App_Code.opqcfopj, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied.
An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
View 8 RepliesI don't know what is going on. When I try to add a tab container in my page, it allows me to do that but when I modify the code, the unknown server tag error pops up in the design view of the page.
I checked the source code to see if I had my @register clause in there, and it was there, but still the error shows. I don't know what happened, the last time it worked perfectly.
I have also recently downloaded the cute editor for .net and installed the .dlls to my bin folder and it is showing the same simtoms as well.
I am integrating third party Web Page Management CMS solution into my web application. I am getting the following error when I try to recompile:
Parser Error Message: The type 'oboutSolutions.ManageWebsite' is ambiguous: it could come from assembly 'C:VS2010 ProjectsTestCMSCMSinoboutSolutions.DLL' or from assembly 'C:VS2010 ProjectsTestCMSCMSinCMS.DLL'. Please specify the assembly explicitly in the type name.
Source Error:
Line 1: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="ManageWebsite.aspx.cs" Inherits="oboutSolutions.ManageWebsite" %>
Line 2: <%@ Register TagPrefix="obout" Namespace="OboutInc.Editor" Assembly="obout_Editor" %>
Line 3: <%@ Register TagPrefix="obout" Namespace="Obout.Interface" Assembly="obout_Interface" %>
I have a web site that uses the both c# and vb.net in the app_code section. The different languages are separated into their own folder and correctly configured in the web.config.
<codeSubDirectories>
<add directoryName="BasicCode"/>
<add directoryName="CSharpCode"/>
</codeSubDirectories>
This works fine 95% of the time. In production using 2 load balanced servers I sporadically receive an error message along the lines of:
"Unable to find assembly
'App_SubCode_BasicCode.xxx,
Version=0.0.0.0, Culture=netural,
PublicKeyToken=null'.
The site is hosted in IIS7 and I think it has something to do with the name of the dll assigned during dynamic compilation. I do not see this problem in a single server environment. Could this be because when the session is balanced to the second server the dynamic compiled dll name is different?
I have uploaded site on web server but I am having the following error.
"Could not load file or assembly 'MySql.Data, Version=6.1.3.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'MySql.Data, Version=6.1.3.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified.
I created an asp.net application, and it worked on my local PC. I was using Visual Web Developer 2010 beta.
Then I uploaded almost every file (not the sln and suo files) to my shared-host unix website. This Unix website is supposed to support asp.net.
But I got this error:
Server error in application. Could not load file or assembly 'dave' or one of its dependencies.This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded Does this mean my version of the net.framework is too advanced? Or maybe the version of Visual Web Developer? Or some other reason?
I have a ASP.NET site, in which i have to register the dlls which i have created in VB.NET. I configured this project on Win2003 Server and register the dlls. It was working fine.
But when i rehosted it on same machine but by different folder, and try to register the dll, it is showing me the following warning.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727>RegSvcs f:homeintermeshweberp1BinIndiamart.dll Microsoft (R) .NET Framework Services Installation Utility Version 2.0.50727.3053 Copyright (c) Microsoft Corporation. All rights reserved.
WARNING: The assembly does not declare an ApplicationAccessControl Attribute. Application security will be enabled by default.
Installed Assembly:
Assembly: f:homeintermeshweberp1BinIndiamart.dll
Application: Indiamart
TypeLib: f:homeintermeshweberp1BinIndiamart.tlb
I've just got an error message that was somewhat unexpected:
[code]...
I've got an ASP.NET website that has abotu 10 projects makign it up which are compiled into DLLS and in the bin directory. ReportingContents is one of these projects. In the past I have had success in copying over a new version of the files (dll, pdb and xml) to the bin directory and recycled the app pool and it just picks up the new version on its own. This time I thought "I shouldn't have a debug version on the site" so I built as release and just copied up the dll and xml files and asked our deployment people to remove the pdb.When I was told it was all done I tried to access the site and got the above error message.The thing that surprises me is that the assembly it mentions is "Delete ReportingContents" and I don't know where the "Delete " might have come from in there.
I have adeed a dll file on my project and it's working fine with local system. but when i uploaded it on hosting webspace it's displaying error. "assembly refference is missing" i have alreday added bin folder there. So how to add bin folder on hosting spaces.
View 1 RepliesSystem.TypeLoadException: Could not load type 'System.Web.UI.ScriptReferenceBase' from assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
View 1 Repliesi was wondering if visual studio 2010 can be used as an assembly editor too????if yes where do i have to go to create a first blank page for an assembly project?
View 1 Replies