I see a message on:
winform control hosted in IE, FileIO security exception.
I have got the same problem, which I cannot figure out what is the solution for weeks.
I have Windows 7 (Home premium edition), framework 3.5 (how can I check that, if gacutil is correct version, if it metters, anyway ...)
I am writting on C#.
Also on assemblyInfo.cs :
[code]....
these below codes give whole data of my Rehber datas. But if i want to show web page via Gridview send me out of memory exception error.
[code]....
Im using Visual Studio 2010. I'm new to asp.net. I'm trying to do a simple user login page but whenever I try to launch the Web Administration tool, I keep getting some exception error. The below images is the error I encountered.
View 4 RepliesI am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------
And even i tried in Global.asax page in Application_Error() method like below
Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();
And in my Error.aspx.cs page i have placed a label and i have written code like this
protected void Page_Load(object sender, EventArgs e) {
Label1.Text=Request["errmsg"];
}
But it is not getting redirected my error page and not displaying anything on it.
After many years reading this forum... I didn't found the solution to my actual problem... When I tought... this could be a big problem... I have a web app wich doesn't have try catch blocks in every method... so I need to implement a generic solution to handle exceptions and the most important... show some BO exceptions to user inside a MessageUserControl (ASCX) wich uses AJAX. this is the big problem, I tried many solutions, application_error, a specific log module, page_error... and with all I got to the same problem...
The UpdatePanel, when it got an unhandled exception, it fires the events (application_error, page_error) or even the httpmodule, but I think it call an Response.End, wich stops any action in the page... and this is just I don't want to do... I need to display the message to the client. this is the call to show the message...
[Code]....
My page wich gots an unhandled exception are inside an UpdatePanel, if I remove it, the message shows UP! I'm working on this for 5 long days.
I am getting a parameter is not valid exception..While saving the image
Here is my code to save the image
if (!File.Exists(pictureBox1.Tag.ToString()))
{
Image image = pictureBox1.Image;
image.Save(pictureBox1.Tag.ToString(), ImageFormat.Jpeg);
}
else
{
string delStr = pictureBox1.Tag.ToString();
pictureBox1.Image.Dispose();
File.Delete(delStr);
Image image = pictureBox1.Image;
image.Save(delStr, ImageFormat.Jpeg);
pictureBox1.Image = Image.FromFile(delStr);
}
When I am executing my stored procedure it is throwing Divide By zero Exception. Because In my database there is no data for some months. How can I solve this?
View 5 Repliesi am using create user wizard and capturing other information within content template when a new userregisters. Some of the textboxes are binded to required field validators.there is a validation control on the page and ShowMessage box is True.If they dont complete some of the text boxes then the message box pops Up with the error message.It does not however include information errors like "User already exists" or Email address already existsfrom the create user wizard membership UserName and Password Textboxesis it possilbe to hook all of these up so I get one message box with all errors including membership ones?
View 3 RepliesBy default in login template, in case user key in the wrong user name or password, the literal message will show the default error message, "Your login attempt unsuccessful..."What i trying to do is, I have a function in my system to disapprove a member, after the member is disapproved, he/she will not allow to login anymore. When the user trying to login, the default literal msg will show out. Is there any way i can do it more specifically like if the user enter the wrong password only, the literal msg show: "Wrong password entered" insteaed of the default msg?
Same goes to the change password control, for any error msg it just show the long msg but does not tell user whats wrong with the entered valueim trying to do something like if the user enter the wrong password, the literal msg show the one i wan to show.
I am trying to passing Exception info tpa custom error page that I have created, and I'm looking for the best way to do so.I ended up creating a session object on my Global.asax page, and I pass the error data to the session object during the Application_Error event, but it throws it's own exception prior to working.
[Code]....
I have also updated my web.config with my error page that I would like to pass session object data to:
[Code]....
I am new to ASP.NET and AJAX
I want to use Accordion control in my page
but when i try to add that controlit is showing the error.
My code is
[code]....
I want handle exceptions in update panel control with c#.
View 1 RepliesI have an ASP.Net site using Forms authentication. One of the aspx pages loads a WinForms user control hosted in IE. That control must connect with a WCF service located in the same ASP.Net web site.How can I make the WCF service secure? Currently I have set the WCF service to use AspNetCompatibilityRequirements mode but the user control hosted in IE can't connect to the WCF service as it isn't logged in.
View 1 Repliesusing vb.net/asp.net 2005
when a user enters a bad email I am doing a check on this and throwing an exception message as follows, this works fine on the test site but for some reason the same code on the live site gives a "internal server error" (http code 500). The code below:
[Code]....
not certain why this is happening, I assume that it's some server or config difference between the test and live sites. has anyone seen this before? For a quick fix i'm registering javascript alert and showing the same text so it works but I would like to figure out why the code above is not working.
I have an existing project with a silverlight3 app. First I created SALESservice.svc.This is working fine. Now I added another TARGETservice.svc to my project and rebuilded my entire project but when I am trying to add the service reference in to the silverlight app I get the following error:
There was an error downloading metadata from the address.verify that you have entered a valid address. I didn't write any code in ISALESservice.svc AND ITARGETservice.svc . I have written in SALESservice.svc.cs AND TARGETservice.svc.cs files.Is this causing error? But for SALESservice.svc it is working. I didn't add any code in web.config file.
I have created user web control library project and these controls i'm using in my web application. These User controls just works fine in my local machine but when i moved this project(including Library) to our Local server , it is throwing security exception
Error 1 Cannot register assembly "LocalServerLibraryDemoLibraryDemoLibraryinDebugLibrary.dll". Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. Library
Anybody knows why this error occuring...?
System.NullReferenceException: Object reference not set to an instance of an object at System.Web.UI.ScriptManager.RegisterScript (System.Collections.Generic.List`1& scriptList, System.Web.UI.Control control, System.Type type, System.String key, System.String script, System.String url, Boolean addScriptTag, RegisteredScriptType scriptType) [0x00000] in <filename unknown>:0 at System.Web.UI.ScriptManager.RegisterClientScriptInclude (System.Web.UI.Control control, System.Type type, System.String key, System.String url) [0x00000] in <filename unknown>:0 at System.Web.UI.ScriptManager.RegisterClientScriptResource (System.Web.UI.Control control, System.Type type, System.String resourceName) [0x00000] in <filename unknown>:0 at WebLib.Utils.AddStyles (System.Web.UI.Control p) [0x00000] in <filename unknown>:0 at WebLib.Input.OnPreRender (System.EventArgs e) [0x00000] in <filename unknown>:0 at System.Web.UI.Control.PreRenderRecursiveInternal () [0x00000] in <filename unknown>:0 at System.Web.UI.Control.PreRenderRecursiveInternal () [0x00000] in <filename unknown>:0 at System.Web.UI.Control.PreRenderRecursiveInternal () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessLoadComplete () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.InternalProcessRequest () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessRequest (System.Web.HttpContext context) [0x00000] in <filename unknown>:0
View 2 RepliesI am trying to implement the Ajax HtmlEditor into my application. I currently am using a regular TextBox to load and save some data to some EMail template files and had to do some work-arounds to get it to accept the HTML Input. I am trying to upgrade it to use the Editor, but as soon as I insert the Editor and do a PostBack, I receive the Security Exception below. There is absolutely no change to the code-behind, so I don't understand the issue. There is so little on Google for the Version 3.5 Editor that I'm stumped. I have Debugging enabled, but it won't give me the Soruce Error either.
Security Exception Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file. Exception Details: System.Security.SecurityException: Request failed. Source Error:
[Code]....
:: REMOVED FOR SIMPLICITY :: Stack Trace:
[Code]....
I getting error in loading .css file in my asp.net Web Application, I got error message like
Error: The stylesheet http://'<Website URL>'/css/default.css was not loaded because its MIME type, "text/html", is not "text/css". How can I solved it.?
I am having some issues accessing a literal in a usercontrol.
I get the following error: System.NullReferenceException: Object reference not set to an instance of an object. at page.sbPageLoad(String sTypeCD, Int32 iCategoryID, String SortExpression)
Does the following code below look right?
Here is my usercontrol named: topbanner.ascx:
Code:
[code]....
I just published my website to a server. Using this server I get the following error when I click on an image to view it:
System.OutOfMemoryException: Out of memory.
I didn't had the error when I worked on my local server.
I am trying to register below mentioned javascript for using with GridView to add freeze functioality on GridView.
When compiling an error is thrown Microsoft JScript runtime error: 'Sys' is undefined
How it can be fixed.
<script language="javascript" type="text/javascript">
// This Script is used to maintain Grid Scroll on Partial Postback
var scrollTop;
//Register Begin Request and End Request
Sys.WebForms.PageRequestManager.getInstance().add_beginRequest(BeginRequestHandler);
Sys.WebForms.PageRequestManager.getInstance().add_endRequest(EndRequestHandler);
//Get The Div Scroll Position
function BeginRequestHandler(sender, args)
{
var m = document.getElementById('divGrid');
scrollTop=m.scrollTop;
}
//Set The Div Scroll Position
function EndRequestHandler(sender, args)
{
var m = document.getElementById('divGrid');
m.scrollTop = scrollTop;
}
</script>
Following is the error log captured:-
The error description is as follows :
Source: mscorlib
Message: Padding is invalid and cannot be removed.
Stack Trace:at System.Security.Cryptography.RijndaelManagedTransform.DecryptData(Byte[] inputBuffer, Int32 inputOffset, Int32 inputCount, Byte[]& outputBuffer, Int32 outputOffset, PaddingMode paddingMode, Boolean fLast)
[code]....
This issue is occuring on and off and I am unable to reproduce it at my end.
It's a ?/$%/$%"!$ mess ... My webpage contains a winform user control. That user control send text to LPT1.It acts like an ActiveX. I set my website (on localmachine) as a trust one in IE and set all properties for ActiveX under security tab. The user control is showed under IE but I got a System.Security.Permissions.SecurityPermission when execute it.When I sign my control, IE can't display it ! I registered the dll in the .Net Framework Configuration tool
View 3 Repliesi have a datagrid control which displays users created using sqlMembership..it has a row deleting event which is only accessed by administrators here is the code..
[Code]....
my problem here is to catch the securityexception and display in label
