I created an MVC project in vs2010 RC and i cant really tell if its running on MVC 2 Beta or the freshly released MVC Release. Is there anything i can look out for to determine this?
View 12 RepliesHow can I see the version of .net framework which renders my aspx page on remote server?
View 4 RepliesI am trying to roll out a Wordpress site here at [URL] but ran into a snag as the only Wordpress version that it supported was the 3.0.1 not the 3.0.4. What version does Webmatrix install? I have a running site and would rather not rebuild it, can I install this over the top of my existing site?
View 6 RepliesI am using VS2008 under WINXP, I have a project which the ASP.NET version is set to 3.5.
The code: Response.Write(System.Environment.Version.ToString) prints out 2.0.50727.3603
After checking in http://en.wikipedia.org/wiki/List_of_.NET_Framework_versions I found out that the ASP.NET version is 2.0 SP2.
How can I set my project to ASP.NET 3.5 ?
This could be a simple one but it has got me baffled. I have a ASP.NET solution that I have stored in C/inetpub/www/root/website. The solution and project files are all stored in there and I have set it up as a virtual directory in IIS.so I can view the web page in 2 ways.
1. - By running the solution [URL]
2. - By viewing the url in IE: [URL]
I changed the project to use windows authentication and I added alabel in the top right of the page which displays the user logged in i.e. DOMAINusername.
When I run the solution from VS2008 it displays the username on the page no problem (that is my logon id since I am running it). But when I view the page by typing the URL into IE - it doesnt seem to recognise the authentication and it doesnt display my DOMAINusername in the label.
Any ideas why this is? I thought maybe it was something to do with the .dlls but I did a simple test. In the project I created a new a label on the page and in the page_load I wrote "label.text = "Test Text". In both cases the label showed "Test Text" as expected so it is nothing to do with building the solution. Is there something about windows authentication - why would it work in one case and not in the other? So as a third test I actually opened IIS and right-clicked on the my website in the console and choose "browse".
I then got the following error:
Sequence contains no elements
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: Sequence contains no elements
Source Error:
[Code]....
Now I set a break point at this point in my project in VS2008 - but when I run it there it doesnt even go to this code!
when i tried to run my old project then i am getting this error:
Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.C:UsersGautamDocumentsVisual Studio 2005WebSitesOnlineShoppingProjectWeb.Config33
I have had a project called Articles and the project complies fine. I have it running as a seperate site on my machine and it works like a charm under IIS7. When I start the project from VS2010 in debug mode (by pressing F5) it lands on a page that says: "Parser Error Message: Could not load type 'Articles._Default'."
I i however change the path in the browser from [URL] Home it works fine again, indicating that my routing table is bust but it was working yesterday and I did not change any route, The error page also says: "Please do not delete this file. It is used to ensure that ASP.NET MVC is activated by IIS when a user makes a "/" request to the server." That idicates to me that it went to default.aspx...right?
I use Mac as my primary OS, but I often work on ASP.NET MVC projects. I want to use the same file system for them, and not virtual OS image.
The reason for that is because I want to integrate the projects with Mac OS (i.e. upload them to the server via Transmit, a Mac OS FTP app).
But the problem here is that ASP.NET can't really work with projects located on network drives. So when I try to run a site (either with VS 2010's built in web server or with IIS 7), I get
Error Summary HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid.
And this is a common mistake but no solution that I could find worked for me.
If I create a project on Parallel's virtual C: drive, everything works fine.
P.S. I hear that VMWare has better network drives support, but is it as smooth as Parallels? Parallels 6 runs extremely fast for me, and my Mac Mini doesn't even get warm with VS 2010 and several other Mac apps open.
P.P.S. I also heard about using DropBox and/or Windows Live Mesh. Is clouding a good idea in this case?
when i run my project i got bellow error...
"Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster."
I'm attempting to run/debug an ASP.NET MVC project under .NET 4.0 using VS2010's Dev Web Server. The server appears to spawn successfully and an instance of IE Explorer opens. However, the browser never seems to find the page. The browser just "spins" showing only a white page...no error message.VS is configured to randomly select a port, although I get the same results when configuring numerous static ports.The ASP.NET project is the start-up project.
View 2 RepliesWhen I build me C# web app in VS 2008 I am presented with a white screen. Internet exporer shows that it is 'Done'. This happens no matter which Form of my project I run and will not display even the directory screen.
I recently copied and pasted controls from one form to another and after this it seems to have stopped working. I have tried deleting the newly created controls and then eventually the Form.
So I have seen the items about the differneces between web application and web site projects. My big question is - how can I tell which one I am running in the RC of VS 1010?
View 1 Repliesi have one problem in executing the ssrs reports..
i've developed one project for that project there are some SSRS reports which are deployed
in path ( "http://localhost/reports/") it is working fine...
when i run through the project and press F5 ( i.e execute) the reports
are displaying correct with full of content in that...
now i want to host that project.. so i've created one virtual folder named as proj in IIS7..
and i've assigned the project to that..
when i execute from IE7 and type the path http://localhost/proj then the main page is displayed
and when i click the button print then it is showing the empyt report with only the toolbar above
no content are there in reports ...
but when the run the project i.e F5 then the report is displayed with full of content...
I installed VS2010. Then The Azure toolkit. I created a new solution, with one webrole in it. I added 'HelloAzure' to the default.aspx, and then pressed f5 to run it.
It runs! I see my text 'HelloAzure' in IE8. Yeah!
Now, when I close IE8, it seems that VS2010 simply hangs, is frozen. It accepts no input from mouse/keyb. Nothing moves ... you know ... it hangs.
Taskmanager is required to get out if this state.
The problem is I have a laptop that I take to University with me to all my lessons and lectures and it has Visual Studio 2008 installed on it and I work on my assignments in Visual Studio just fine. However when I get home I would like to use my desktop PC which has the exact same copy even from the very same disk of Visual Studio 2008 that is installed on my laptop. The problem is no matter what I do I can't open and work with any projects that I have created on my laptop.
Now if I create the project on my desktop PC it will open just fine on my laptop and I can continue to work with the project but the minute I save and take that project over to my desktop I get the self same error message shown below. [URL] I did do a little research and I found what looked like a solution for some people and that was to change the "SQL Server Instance Name" to SQL2008. As shown below it was set to SQLEXPRESS which is the same as what it says on my laptop copy. [URL] But all this did was present me with a new message as shown below. [URL] Uploaded with [URL] I'm completely at a loss as to what the issue is. Both my laptop and desktop run a fully updated copy of Windows 7 64Bit and have the same copy from the same CD of Microsoft Visual Studio 2008.
I'm creating a website in Visual Studio 2010. I would like to use Visual Studio for C# debugging, but it also uses Visual Studio as JavaScript debugger. Is there a way to disable script debugging for Asp.Net website projects? I run my projects by hitting F5 in my Visual Studio. (I've noticed that when I attach the debugger manually, I can specify the type of stuff I would like to debug.) Note: I would like to debug, but not with Visual Studio. The developer toolbar is enough.
View 3 RepliesI have a new development machine running windows 7 professional 64 bit. On loading up a website project Im getting this error
'The Web Application Project 'websitename' is configured to use IIS. To access local IIS websites, you must install IIS components:
IIS 6 Metabase and IIS 6 Configuration Compatibilty
ASP.net
Windows Authentication
In addition you must run Visual Studio in the context of an administrator account
As far as Im aware, I am an administrator of my own pc and I have the .net framework installed.
Before using any class in your website project/page we have to add it's assembly reference to our project. Right?
Now, when I am using SmtpClient class from System.Net assembly after adding the System.Net.Mail namespace in namespace node of application's web.config file but without adding assembly reference to the project, it still accepting and running the code. Why?
I enquired the machine's web.config file located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIG but didnt find assembly reference for System.Net there also.
So bit confused how it is working and where the assembly reference has been added and how?
Are the Crystal Reports objects within Visual Studio (I'm using 2005) the full version or is it a trial version that is missing features?
View 1 RepliesWe have an application that is already deployed in the production environment. And currently it is using Dundas evaluation version. We tried updating it to the licensed version by simply pasting the dll file. but we got the error message as "The file has not been pre-compiled and cannot be requested".
View 1 Repliescan i determine programmatically if im running my web project in debug mode or compiled?
or even better if im running it on my local machine or on a server? example to change the path for databases etc..
I'm try to get my site to detect what browser someone is using to ensure they're using one that is compliant with our site. Everything works, except Firefox seems to post the wrong version in the Request.Browser variables.I'm on Firefox 3.6.10, but Request.Browser shows Mozilla 1.9.2.10. It's correct in the HTTP_USER_AGENT string:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.10) Gecko/20100914 YFF35 Firefox/3.6.10 ( .NET CLR 3.5.30729)
Is there a way to detect it better without having to parse through the HTTP_USER_AGENT string?
Is there any limit on the size/numbers in the version number of the FormsAuthenticationTicket.
I tried to create an ASP.NET cookie using forms authentication, with a large version number(ex: 1234567 need this number for identification purposes). But when I decrypt the cookie I get 135 as the version number.
Initially the old forms authentication cookie was removed, in order to add new information.
Response.Cookies.Remove(FormsAuthentication.FormsCookieName);
Following is the code I used to create the FormsAuthentication cookie.
FormsAuthenticationTicket newAuthTicket = new FormsAuthenticationTicket(1234567, un, DateTime.Now, DateTime.Now.AddHours(5F), false, user_data);
HttpCookie newauthCookie = new HttpCookie(FormsAuthentication.FormsCookieName, FormsAuthentication.Encrypt(newAuthTicket));
Response.Cookies.Add(newauthCookie);
After retrieving the cookie, the version number I got was 135. This number varies with different version numbers.
string cookieName = FormsAuthentication.FormsCookieName;
HttpCookie authCookie = Context.Request.Cookies[cookieName];
if (authCookie == null)
{
return;
}
FormsAuthenticationTicket authTkt = null;
authTkt = FormsAuthentication.Decrypt(authCookie.Value);
if (authTkt == null)
{
return;
}
int versionID = authTkt.Version;
Can someone let me know if it's a bad idea to use such big version numbers, or am I missing something in this.
I have Visual Studio 2008 installed on this workstation with SQL 2000, 2005 Express, 2008 Express and I think 2008 R2 (not sure if that is a version itselve or not)
I will call that workstation HOME
I created some tables in SQLEXPRESS through VS2008.
I worked on this project on another workstation that I just installed VS2008 annd SQLEXPRESS 2008 and I know that was R2
Installed Visual Studio 2010 trial edition between the thiem I made the tables on HOME and tonight for the first time since that install
I am now getting the "cannot be opened becuase it is version Version 661. This Server supports version 655..."
What to do now?
I can opened SQLExpress 2008 management studio and it is running.
So is my SQL 2000. The problem seems to be that after the VS2010 install neither VS2008 or VS2010 can connect to the SQLExpress 2008
What do I do now?
I can't remove sql 2000 because it is tied to several 3+ gig databases that will not work in Express.
i am working in webapplication in asp.net using c#.I have a problem that currently i am using ajaxcontroltoolkit version 3.0.20820.0 but in this toolkit i don't have Editor Ajax control so i want to upgrade it with new version ajaxcontroltoolkit version 3.5.40412.2
When i upgrade it then my old ajax control is not working like validatorcalloutextender and requiredfieldvalidator etc.
so please tell me how can i upgrade ajaxcontroltoolkit version from 3.0.20820.0 to version 3.5.40412.2
i also use in web.config file but not successfull.