I put a breakpoint on a Page_Load method for a .aspx page and I'm getting the following error when trying to run in debug mode:Quote:The breakpoint will not currently be hit. No symbols have been loaded for this document.I checked the "Modules" window and the DLL for this project is not listed there, but it does list all the DLLs for the other projects in the solution. I also checked web.config and verified that debug="true".
View 5 RepliesIf application is started without debugging - it runs smoothly, when I press F5 I get: "Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Click Help for more information"I noticed that problems are caused by URL Rewrite section in web.config:
<rewrite>
<rules>
<clear />
<rule name="LowerCaseRule" stopProcessing="true">
<match url="[A-Z]" ignoreCase="false" />
when I comment it out - I can start debugging. Also debugging works on VS's built-in web server.I'm running Win7 64 bit, VS 2010, application's framework is 4.0, in IIS application has ASP.NET 4.0 Intergrated pool set
I have two projects: A web application project, that has a webpage that hosts a Silverlight application, as well as a web service A Silverlight application project, the one hosted in the above web application
If I debug the Silverlight application, it wants to run this with a generated web page, which will of course not start my web application, and web service calls fails due to some cross-site security model. So even if I have the web application running, the Silverlight application won't use it.
If I debug the Web application (that is, set it as a start project and hit Debug), then the Silverlight application is apparently correctly hosted, but I can't debug it. Any breakpoints in it shows up as those hollow circles.
So what am I doing wrong? How should I configure my projects so that I can start the web application, host my Silverlight application, and debug it?
I'm betting it is one of those "dough" moments when someone tells me, but I can't figure it out.
This is Visual Studio 2008, .NET 3.5 and Silverlight 3.
When I run my project from Visual Studio, my webpage comes up normally, and about 5-10 seconds later, a duplicate one appears as well. (not that hard to close the second one) I just thought I'd ask if anyone knows why it would do this.
By the way: It only seems to do this when I already have a browser window open (not including my project's webpage browser window).
Is it possible to debug a Web Setup Project, specifically its custom action code, by setting breakpoints and walking through the code? How does one do this?
View 2 RepliesI know you can copy a Website intact to the server and have it run normally (security and compilation time aside). What about the projects that are in the solution? [whose dll's are copied to the bin when built]. Is there a way to copy the projects' code files to the server as well?
My goal is to be able to debug [by modifying code in the project if needed] directly on the server without having to install an IDE [or keep building on dev machine and copying over dlls]. I can debug/modify the website files, but not the projects.
When debug a project, then error message show:
"Error while trying to run project : Unable to start debugging on the web server. The project is not configured to be debugged."
I am having a simple web site created using VS.NET 2003 using .NET Framework 1.1 The web site project builds properply. When I hit F5 (to debug) it displays "Error while trying to run project" message. I am able to debug console and windows service applications. Recently I installed VS.NET 2010 (.NET Framework 4.0). I think prior to this it was working fin. ENV: Windows XP and IIS 5.1
View 4 RepliesI have installed VWD2010
created a new website (Build Target 3.5)
I then made a reference to the AjaxControlToolkit.dll where it created a new Bin folder and added a whole load of folders below plus the dll file apprears.I've also installed the AJAX tool bar where all the Ajax controls are available.
Then on a new page I added the Editor control which rendered the page as the following
[Code]....
[Code]....
[Code]....
I recently downloaded the mvc 3 RC and I am receiving a type load exception everytime i do a fresh compile and start a debugging session. The error is
System.TypeLoadException crossed a native/managed boundary
[code]...
I can click ok and my debug session continues working as normal. I can close the session and restart without making any code changes, and it will open and work correctly. But, everytime I close, make a compilable change and rerun, I get the message.
I'm creating a website in Visual Studio 2010. I would like to use Visual Studio for C# debugging, but it also uses Visual Studio as JavaScript debugger. Is there a way to disable script debugging for Asp.Net website projects? I run my projects by hitting F5 in my Visual Studio. (I've noticed that when I attach the debugger manually, I can specify the type of stuff I would like to debug.) Note: I would like to debug, but not with Visual Studio. The developer toolbar is enough.
View 3 RepliesI'm trying to develop a web application that dispatch (Dispatcher) to multiple versions of another webapp on a per-request basis. To to that end, I'm using ApplicationManager.CreateObject to create new AppDomains running the web app in question, but the new app domains seem to be failing to load the Dispatcher's DLL (and I'm copying the DLL over to the web app's bin directory, so I'm pretty sure it's there).
[code]....
The Appbase seems to be pointing at the root of the development server, rather than the path passed in to ApplicationManager.CreateObject and it only seems to be searching directories under the development server which seems strange. how to make the new AppDomain search for the DLL in the web app's root rather than under the development server?
The last phase of the installer fails with this message:Installation IncompleteThe installer was interrupted before [project] could be installed. You need to restart the installer to try again.
Running msiexec /i installer.msi /l*vx setup.log shows the following entries in the setup log:
INFO : [...] [ApplyWebFolderProperties]: Getting web folder property token...
INFO : [...] [ApplyWebFolderProperties]: Token is '/LM/W3SVC/1/ROOT/ProjectDir/DynamicData/Filters'.
INFO : [...] [ApplyWebFolderProperties]: Getting METADATA_HANDLE for the directory '/LM/W3SVC/1/ROOT/ProjectDir/DynamicData/Filters'.
[code]...
i have a small 2 aspx page vb.net application. its has main.aspx with main.aspx.vb in back.
first line on aspx reads -
<%@ Page Language="VB"
AutoEventWireup="false"
codebehind="main.aspx.vb"
Inherits="a1_main" %>
first lines of main.aspx.vb read -
Partial Public Class a1_main
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
Handles Me.Load
End Sub
End Class
its completely blank. but when i try to debug it just to see design on aspx page it gives me this error -
Could not load type 'a1_main'.Line 1: <%@ Page Language="VB" AutoEventWireup="false" codebehind="main.aspx.vb" Inherits="a1_main" %>
I have developed a Web application in VS2008. It works perfectly on my development PC. When I publish and upload to the shared Windows hosting service (which supports ASP.NET 3.5), it fails (even when accessing it from my development PC). The error message is: Could not load file or assembly 'Microsoft.mshtml, Version=7.0.3300.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.I have read many forum posts on the subject, and have tried the recommended solutions:
Set the reference to Copy Local - VS2008 does not allow Copy Local for ASP.NET references, just for WinForms references.Copy mshtml.dll into the installation directory - I have tried 3 different versions of the file, both in the root directory and /bin/, under both the names "mshtml.dll" and "Microsoft.mshtml.dll". None work.install the Interoperability Assemblies from Visual Studio onto the server by running "vs_piaredist.exe" - I don't have admin access to the server and the hosting company won't do it.
I have a async file upload control and I am doing client side validation for Image."OnClientuploadstarted" I am doing the client side validation.My validation is working fine but my problem is that the file upload control text box goes green (i.e file is loaded on the server) even if the validation fails which is I dont want.What I want is when the client side validation fails the file does not gets loaded on the server and the Async file upload textbox does not goes green.I have goggled but have not found a suitable solution.
View 4 RepliesDebug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
View 4 RepliesIn an obviously misguided effort to keep versions of a site built through vs2010 .aspx vb I copied the entire visual studio 2010 folder from its default location on my local pc to a folder on a network. I then opened the network folder version of the project in VS, made a small change to some text, built the site sucessfully and published the site sucessfully to the same place the original site was published to. However, when I try to access the site I get the "resouce cannot be found" error. In a bit of a panic I opened the original project in VS and published it...no problem the site comes up. What am I doing wrong?
View 3 RepliesI get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 RepliesI'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
To me this should be much easier, but I can't seem to retain the values that are put in the Insert template upon a validation failure or when the sql fails. This will prevent the user from having to retype everything agin in the event of a failure.
As you can see I am using the Sub Insert_Click and not using an insert through the wizard. so the fields are unbound textboxes on the form. There are 2 dropdowns that provide choices for the other fields.
I pasted in the code using the text only option becuase the format was getting messed up. I probably need more background on why the fields are blanking out.
[code]....
I like to build a components collection project so that I can use those components later on other projects. For example I created a UserControl called MyDataGrid.ascx
So suppose the projects layout are something like this:
--> IPGostarProject - Under namespace of IPGostar - contains components and lot's of user controls
--> SampleProject - here I want to use MyDataGrid.ascx UserControl from IPGostar namespace.
But as you know LoadControl function only takes virtual directory as it's parameter. So you can't load anything outside the SampleProject directory!
I have MVC project, and then I want to load webform standard from special folder (~/views/Report Report.aspx). and I Try to call the report.aspx from homecontroller (different controller). The result is the resource is not found.
View 7 RepliesI designed a multilanguage site. When I click languages at home, but the remaining pages does not change the language at the same time (not related to the database, just change the text of the controls). What function should I use to load all of the project.
View 4 RepliesI have had a project called Articles and the project complies fine. I have it running as a seperate site on my machine and it works like a charm under IIS7. When I start the project from VS2010 in debug mode (by pressing F5) it lands on a page that says: "Parser Error Message: Could not load type 'Articles._Default'."
I i however change the path in the browser from [URL] Home it works fine again, indicating that my routing table is bust but it was working yesterday and I did not change any route, The error page also says: "Please do not delete this file. It is used to ensure that ASP.NET MVC is activated by IIS when a user makes a "/" request to the server." That idicates to me that it went to default.aspx...right?