Debugging Silverlight When Hosted In A Web Project?
Jul 8, 2010
I have two projects: A web application project, that has a webpage that hosts a Silverlight application, as well as a web service A Silverlight application project, the one hosted in the above web application
If I debug the Silverlight application, it wants to run this with a generated web page, which will of course not start my web application, and web service calls fails due to some cross-site security model. So even if I have the web application running, the Silverlight application won't use it.
If I debug the Web application (that is, set it as a start project and hit Debug), then the Silverlight application is apparently correctly hosted, but I can't debug it. Any breakpoints in it shows up as those hollow circles.
So what am I doing wrong? How should I configure my projects so that I can start the web application, host my Silverlight application, and debug it?
I'm betting it is one of those "dough" moments when someone tells me, but I can't figure it out.
This is Visual Studio 2008, .NET 3.5 and Silverlight 3.
View 1 Replies
Similar Messages:
Nov 18, 2010
I have some project written in Visual Basic (not Visual Basic .NET but simple Visual Basic - sic!). I can compile it and generate a dll. Then inside my web application I add reference to this dll library. When I run my web application hosted in default Visual Studio server, everything is fine and I can debug my Visual Basic project. However, when I host my web application in IIS then I can't. Code does not stop in my breakpoint. My asp.net catch the exception when I try to execute some method from the mentioned library which is something like:
Unable to cast COM object of type 'xxx' to interface type 'yyy'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{4C2875B5-3265-306B-9C74-1BEC98986B1A}' failed due to the following error: Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY))..
View 1 Replies
Jun 24, 2010
First of all, this is my first attempt at a silverlight app and it's a prototype. I have a pre-existing solution with multiple projects. One of those projects is a web portal that has a services directory and publish a .asmx. I added the silverlight app to my solution.When I run the silverlight prototype, it gives me the message: "The silverlight project you are about to debug uses web services. Calls to the web service will fail unless the silverlight project is hosted in and launched from the same web project that contains the web service." That's fine. How do I do that? When I run the silverlight app directly, it runs in the browser as
"C://file/.../PrototypeTestPage.html"
I tried taking that HTML file and adding it to my portal and then navigating to the HTML file. That just gives me a blank page. After the page loads, the browser shows a "Waiting for localhost..." as if it's making the service calls, but my breakpoints on the service calls aren't being called. Can someone give me some pointers?
View 1 Replies
May 19, 2010
I have a silverlight application project that I need to add to an ASP.NET Project. I know it can be done because you can choose to have both when you first create a silverlight project, i'm just not sure how you would do it after the fact.
View 2 Replies
Aug 30, 2010
I put a breakpoint on a Page_Load method for a .aspx page and I'm getting the following error when trying to run in debug mode:Quote:The breakpoint will not currently be hit. No symbols have been loaded for this document.I checked the "Modules" window and the DLL for this project is not listed there, but it does list all the DLLs for the other projects in the solution. I also checked web.config and verified that debug="true".
View 5 Replies
May 28, 2010
When I run my project from Visual Studio, my webpage comes up normally, and about 5-10 seconds later, a duplicate one appears as well. (not that hard to close the second one) I just thought I'd ask if anyone knows why it would do this.
By the way: It only seems to do this when I already have a browser window open (not including my project's webpage browser window).
View 4 Replies
Mar 21, 2011
I've ran trough many websites and tried soo many things that I've finally decided to try it creating a question of my own. This is the error that I get when I try to access my WCF project from my Silverlight 4 app. anyone have any idea on how to fix this error? PS. If anyone needs any more information let me know.
An error occurred while trying to make a request to [URL] This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. see the inner exception for more details.
View 1 Replies
Jun 18, 2010
Is it possible to debug a Web Setup Project, specifically its custom action code, by setting breakpoints and walking through the code? How does one do this?
View 2 Replies
Sep 7, 2010
I have been working with ASP.net for a while now and was very familiar with how the page lifecycle worked. I am now trying to incorporate Silverlight into my ASP.net project and I am a little confused on how it works with the ASP page lifecycle.
For example, with Silverlight, I understand you need to access the server using the web service. I am able to populate a Silverlight datagrid by calling a stored proc through the web service in the loaded event. My problem is the DataGrid does not populate until ALL the code in the loaded event has executed. As you can see below, I want to do a simple calculation after I populate the DataGrid. I need to populate the DataGrid first and then do the calculation, but the calculation is done before the grid populates.
What I need to happen:
When I call 'tpService.getStepsAsync()', I need it to go to the web service to grab the data and then populate the DataGrid. Then I need 'a = 2 + 2' to execute. How can I get this to occur?
[code]....
View 5 Replies
Jan 6, 2011
I know you can copy a Website intact to the server and have it run normally (security and compilation time aside). What about the projects that are in the solution? [whose dll's are copied to the bin when built]. Is there a way to copy the projects' code files to the server as well?
My goal is to be able to debug [by modifying code in the project if needed] directly on the server without having to install an IDE [or keep building on dev machine and copying over dlls]. I can debug/modify the website files, but not the projects.
View 2 Replies
Aug 24, 2010
Does anyone know how to do this? I built a backend c# class in asp.net but want to access these same classes without recreating them in silverlight. Is this a possibility?
View 4 Replies
Mar 19, 2010
I would like to create a dot net page and combine in it some silverlight parts / elements...
how to do that?
View 4 Replies
Jul 17, 2010
there is already an asp.net web site developed,now due to certain requirements i want to use silverlight enabled pages in my project(for its flexible designing purpose).
View 2 Replies
May 5, 2010
I work in a suite of ASP.NET applications that have several different "modules". The applications all share a main menu, so they all link to one-another. The modules are the high-level areas of the application. So, for example, it might be Payments, Orders, Customers, Products, etc. And Payments and Orders are in one app and Products and Customers are in another. Some of these menu links are "deep links", for example it might be a link to a particular page within the Customers module, such as Create New Customer.
We are about to start a project that will add several more modules to this suite, probably as a new .NET application. I'm thinking about doing these new modules in Silverlight (for various reasons that are not material to the question). If I were to do that, I need to make the menu look the same as the menu in ASP.NET, as the users still need to feel like they are inside one "application".
How should I organize the Silverlight project(s) so that I can "deep link" from ASP.NET pages into particular modules in the Silverlight app? What is even the best idea for creating these different Silverlight "modules"? If I had something that would've been a page in ASP.NET (for example - Create Customer), should each one of those be a separate Silverlight app? Or should it be a separate User Control? Or something else? Should I reuse our shared ASP.NET menu, and deep link to different Silverlight "modules" even within the new application? Or should I reimplement the menu in Silverlight for navigation within the app? Are there menu controls for Silverlight that look similar to ASP.NET menus (with flyout submenus in this case)? Could I maybe even share a SiteMap XML file between them?
View 1 Replies
Aug 2, 2010
When debug a project, then error message show:
"Error while trying to run project : Unable to start debugging on the web server. The project is not configured to be debugged."
View 2 Replies
Jul 13, 2010
I am having a simple web site created using VS.NET 2003 using .NET Framework 1.1 The web site project builds properply. When I hit F5 (to debug) it displays "Error while trying to run project" message. I am able to debug console and windows service applications. Recently I installed VS.NET 2010 (.NET Framework 4.0). I think prior to this it was working fin. ENV: Windows XP and IIS 5.1
View 4 Replies
Apr 1, 2011
I'm creating a website in Visual Studio 2010. I would like to use Visual Studio for C# debugging, but it also uses Visual Studio as JavaScript debugger. Is there a way to disable script debugging for Asp.Net website projects? I run my projects by hitting F5 in my Visual Studio. (I've noticed that when I attach the debugger manually, I can specify the type of stuff I would like to debug.) Note: I would like to debug, but not with Visual Studio. The developer toolbar is enough.
View 3 Replies
Jul 25, 2010
I have an MVC 2 web application which uses models auto-generated by LINQ. When I add a Silverlight project to my solution, generating a new strongly-typed View fails with the message:
Compiling transformation: The type or namespace name 'Data' does not exist in the namespace 'System' (are you missing an assembly reference?). I understand this is most likely because Silverlight does not access the System.Data namespace (at least, I can't add the reference to my Silverlight app). However, it's not really important - I'm just trying to generate an .aspx View at this stage, not a Silverlight View.
Is there any way to get this template generation to work, or do I have to create my Silverlight project outside the solution and build it separately? I was kind of hoping to take advtage of WCF RIA and some of the other goodies one gets from including the Silverlight app within the main solution... anybody got a fix?
View 1 Replies
Jul 29, 2010
I have a Silverlight site hosted in an asp page, it has been developed using vs2010 using .net 3.5 framework and silverlight 4. It all works on my dev box. However when I publish the site and get it deployed I get the error:
Could not load file or assembly 'Moe.Tactical.Ttas.Web' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'Moe.Tactical.Ttas.Web' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
I have checked that the ISS asp setting are using 2.0.50727, and that all my references are using that runtime also.
I am not sure what to do to work out what the missing dependencies are at this point (I don't have access to the deployment box, I will have to go and sit with a system admin).
View 2 Replies
Feb 2, 2011
I have an ASP.Net site using Forms authentication. One of the aspx pages loads a WinForms user control hosted in IE. That control must connect with a WCF service located in the same ASP.Net web site.How can I make the WCF service secure? Currently I have set the WCF service to use AspNetCompatibilityRequirements mode but the user control hosted in IE can't connect to the WCF service as it isn't logged in.
View 1 Replies
Jan 3, 2010
Debug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
View 4 Replies
Jun 3, 2010
I get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 Replies
Mar 7, 2011
I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
View 1 Replies
Jan 11, 2011
I am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
View 2 Replies
May 23, 2010
When I turn on Code Coverage in my test settings, on a project that references the Unity DI container I get the following error:
Cannot initialize the ASP.NET project'{Project Name}'.
The event log specifies the following reason:
Could not load file or assembly 'Microsoft.Practices.Unity, Version=2.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name signature could not be verified.
View 2 Replies
