Response.Redirect But Retain DetailsView DataKeyNames ID?
Apr 10, 2010
I have a nested master page with a detailsview in one of the <asp:contents>.
Now within the <asp:contents>. above I have 2 contentplaceholders.
[Code]....
Then on my contentplaceholder "NestMainBody" I have another detailsview control with a standard button which is outside the detialsview.
What I want to do is click on this button and be redirected to another page which has content in the
NestMainBodyRight but not loose the specific ID's that are on the other Gridviews.
View 6 Replies
Similar Messages:
Aug 13, 2010
which one is better response.redirect or postbackurl(asp:button feture) to redirect web page?
View 3 Replies
Jul 18, 2010
I want to redirect to "~/City/Göteborg", but if I just write Response.Redirect("~/City/Göteborg"); I will end up with an ugly URL in the address-bar like this: http://www.mysite.com/City/G%c3%b6teborg..
So my question is how to redirect to obtain a clean url like http://www.mysite.com/City/Göteborg?
View 3 Replies
Mar 6, 2011
I have a problem with Response.Redirect to specific error page.
so far i have something like :
protected void Page_Load(object sender, EventArgs e)
{
if ((Request.QueryString["UbytovaniePrispevokID"].ToString()) == "")[code]......
What i want to do is.. I have one main page with new posts Each subject of the new post is the link to Another page where is Specific post and coments and user can leave a coment.
What I want is when the Request.QueryString["UbytovaniePrispevokID"].ToString()) == "" or null I want to redirect to error page ...
View 3 Replies
Feb 13, 2010
how can i redirect to other page from pop up window with response.redirect.
View 2 Replies
Jun 9, 2010
What is the easy/safe way to get all HttpContext.Current data (like querystring, etc) in the previous page, after response.redirect or server.transfer to another page?
I am using .net 3.5
View 1 Replies
Jan 13, 2011
Is it necessary to call Response.End() after Response.Redirect(url) Update for all the answers. Because some answers say that it's necessary and others say no, I have searched more and have found in msdn under remarks the following: Redirect calls End which raises a ThreadAbortException exception upon completion.
View 5 Replies
Feb 16, 2010
I am working on a website that I inherited (ASP.NET and C#), and I noticed that in almost EVERY method in the code behind of the project pages (except some helper methods), the original author uses Response.Redirect() to redirect to a page (typically home.aspx, but not always).
What is the purpose of doing this? It seems unneeded to me - at least it doesn't appear to change anything the website is doing if I keep it in or remove it.
View 5 Replies
Feb 20, 2010
I have a flash image slider with a button below each image. When i press that button, the user is redirected to a new page where i add that image product to my cart. The problem is that after doing the adding, i want to redirect the user back to the initial page.
The code:
protected void Page_Load(object sender, EventArgs e)
{
addProductToBasket(getCategoryIdFromUrl(), getProductIdFromUrl());
Response.Redirect(Request.UrlReferrer.ToString());
}
note that in Firefox is working fine but in IE or Chrome it is DOWNLOADING the swf...If i comment Response.Redict(...) the user remains on this page so the click button is working well, only the redirect seems to be the problem.
Edit: The problem seems to be that Request.UrlReferrer keeps as link not the initial page containing the swf but the swf itself.
So, instead of doing redirect to:[URL] if does redirect to the swf contained on the Index.aspx page[URL]
Solved: with a session variable where i keep the initial page's url
View 1 Replies
Jun 2, 2010
I recently upgraded a web app to ASP.NET 4.0 , but I have to downgrade it back to 2.0, because the Response.Redirect from another web app, which is in ASP.NET 2.0, did not work.
View 2 Replies
Apr 23, 2010
I'm looking at creating a simple URL shortening service for our corporate intranet, and I'm curious if anyone knows if there's a maximum length for URLs returned by ASP.NET's Response.Redirect method?
View 3 Replies
May 21, 2010
I am working with ASP.net MVC 2 framework, for multiple sites. We have a base site and then sub sites that inherit from a "Core" site that contains 90% of the functionality that the sub sites will use.
In one of the controllers, I am saving some data, adding a UI message to the tempData and then using Response.Redirect.
The redirect works, but the tempdata is empty after the redirect.
I have tried returning "RedirectToAction" and "RedirectToRoute" with the same routing location and while it populates the TempData, the redirect doesn't happen lol..
So I guess in short, is there a way to get tempdata working when using a standard Response.Redirect?
View 1 Replies
Mar 31, 2010
Is it possible to pass on variables in response.redirect in a query string kind of way (without using form and submit).
If yes, what is the format?
I want to pass some variable (from a text box) from a classic asp page to .aspx page and this is what I am trying to do (I could not use session variables since classic asp and .NET asp share different sessions)-
<input type="text" name="txtZip0" id="txtZip0" onblur="<%Response.Redirect("getcitystate.aspx?txtZip0 = "%> + (this.value)<%")%>"size="14"/>
It is throwing me the error -
Microsoft VBScript compilation (0x800A03EE)
Expected ')'
Is this format correct? Is this even possible to accomplish?
View 7 Replies
Jan 7, 2010
I want to redirect from one page to another based on condition .
For e.g I want to redirect from www.abcd.com/Doc/blogs.aspx to www.abcd.com/movies based on condition which I need to check from code behind C#
I was trying to use Response.Redirect("movies.aspx");
but its not working in IE7
I am getting Http 400 bad request.... whereas in Firefox its working fine
View 1 Replies
Oct 6, 2010
redirect a page into a div using Response.Redirect()?
View 2 Replies
Jan 25, 2011
When using a scanner to insert into a detailsview the scanner scans and then presses enter. How do I either redirect the enter to be a tab, or just stop the enter key from triggering the insert method?
View 1 Replies
Nov 24, 2010
I've just finished reading URL vs. URI vs. URN, in More Concise Terms, and it's really helped understand the distinction between the three terms. Since then I've skimmed the RFC2141 and RFC2616 specs and Microsoft's Response.Redirect Method documentation in an effort to answer the following question confidently.
Given this line of code:
Response.Redirect("~/Foo.aspx");
And this resulting HTTP response (trimmed for context):
Status=Found - 302 Date=Wed, 24 Nov
2010 17:27:58 GMT
Server=Microsoft-IIS/6.0
X-Powered-By=ASP.NET
X-AspNet-Version=2.0.50727
Location=/MyWebApp/Foo.aspx
What name(s) most properly describes what has been placed into the "Location" header?
URL? URI? URN? URC? Which is it?
View 5 Replies
Jan 10, 2010
Response.Redirect() to an address in another server, for example my site is in 172.16.10.20
but i want to have Response.Redirect to 172.16.10.21
View 14 Replies
Jun 20, 2010
Here's my code:
[Code]....
What this code does at the end is Redirects to a direct download, and THEN afterwards, to a "tutorial page" on how to use the download. I can't seem to use these back to back. I've even used Response.Redirect(tutorialURL, false) so it wouldn't terminate processing, but it didn't work. It just STOPPED page processing. I've tried to use the Sleep() method of the Threading namespace, no luck. I'm sure there's an easy way to do this, I just don't know what it is.
View 3 Replies
Feb 4, 2011
When I went for interview, they ask me this question. I don't know this question and concept is not clear.
View 7 Replies
Sep 27, 2010
I'm trying to get the previous page URL after I do a response write and i've looked around the web and people are using HTTP_REFERER but that doesn't work with Response.Redirect so is there anyway to get the URL of the previous page?
I have this code on a few pages and i need to know which page it is coming from when it gets to the servererror/default.aspx page
Response.Redirect("servererror/default.aspx?404")
And on my servererror/default.aspx page i'm just trying to grab the previous page URL and put it into the Session Session("ErrorPage")
UPDATE
I have now got it to work like this
Response.Redirect("server-error.aspx?404&" & Request.Url.ToString())
That passes the URL of the page with the error to the next page and I then grab that from the Query String
View 3 Replies
Jun 9, 2010
For some reason, the response.redirect seems to be failing and it is maxing out the cpu on my server and just doesn't do anything. The .net code uploads the file fine, but does not redirect to the asp page to do the processing. I know this is absolute rubbish why would you have .net code redirecting to classic asp, it is a legacy app. I have tried putting false or true etc. at the end of the redirect as I have read other people have had issues with this. it runs locally on my machine but won't run on my server! I am getting the following error when I debugged remotely.
View 6 Replies
Apr 22, 2010
I have a page grid.aspx which contains a rad grid, when a row is selected for update the user is redirected to another page where the he can update the row, after submitting the updates I want to redirect the user back to grid.aspx, but the grid displays that there are no records to display? When I navigate to another page and then go back to grid.aspx it works fine.
FYI: the update page doesn't use a data source, the item is retrieved and the form is filled manually. I used response.redirect("grid.aspx").
View 1 Replies
Jun 9, 2010
My code does a response.redirect.
I noticed that while debugging. I had a break point on the page_Load but when it did the response.redirect and came to this page it did not hit the break point.
View 2 Replies
Jul 21, 2010
I have an UpdateProgress control to activate on a postback of a button control. The button_click event is performing a Response.Redirect to show CSV Report. The report comes up and the UpdateProgress bar is spinning on the page with the button. However, once the user closes the report and control is returned to the page, the UpdateProgress image is still there spinning.
How can I use the UpdateProgress bar to finish and go away?
View 2 Replies
