SQL Reporting :: Create An SQL Statement That Reflects The Documents In Your Application

Mar 24, 2011

I have an application with several web pages. I am developing securities for those web pages.

Thus, I would like to create a dropdownlist that reflects the various aspx pages, or files inside my application. I would prefer that it reflected the aspx pages only and avoid the .cs files and config files and etc. I'm not even sure that this is possible. Is it? If so how? if I can't filter like that I would still take it.

View 1 Replies


Similar Messages:

SQL Reporting :: How To Create The Console Application And Added Web Reference

Apr 26, 2010

I have some pre-defined reports to be created in my project for which i am using sql reporting services. Reports are created and can be accessed using the URL http://localhost/reports. am asked to autogenerate the reports(some 5-6 reports) and store the reports on the d-drive folder so that the users can directly access the same instead of using the above URL. For that i created the Console application and added web reference http://localhost/reportserver/reportservice.asmx?wsdl
to it.

[code]...

View 1 Replies

Security :: Protecting Documents In Application?

Aug 28, 2010

There is an ASP.NET application www.example.com/APP. From within the application several documents - for example office documents DOCX, PDF, etc. - can be opend. They are accessed via some virtual directory as in
www.example.com/APP/VIRTUAL/letter.pdf.

Of course, the documents may only be accessed from within the application, after the user has been identified succssfully. Some documents may only be opened by some privileged users. It should be impossible to open letter.pdf by simply entering the above url into a browser

I am thinking about the following...

The name of the virtual directory is kept secret. After the user has successfully logged into the application, some secret is created. The secret contains the user's ID and some time information (valid from / until). Then, if a document is to be referenced from within the application, the url www.example.com/APP/<secret>/letter.pdf is referenced. In IIS the secret is checked. For this, some of my code is called, when serving a request. If successfull, the url is rewritten as www.example.com/APP/VIRTUAL/letter.pdf. I tried several components, such as the IIS URL Rewrite, IHttpModule, IHttpHandler. Unfortunately, I did not yet succeed.

View 2 Replies

Digitally Sign PDF Documents In A Web Application?

Jan 27, 2010

I'm building a web application that most allow the user to digitally sign PDF documents with certificates installed in the client machine.

The document, once signed, should be posted back to the server, where it will store the signed version.

The server is running Classic ASP/ASP.NET

View 8 Replies

MVC :: Create A View Which Should Show The Build Documents And A Dropdown?

Dec 8, 2010

I have a document which may have many revisions. I need to create a view which should show the build documents and a dropdown which shows different revisions of the build document. For eg. I have a document Doc1 which have 4 revisions. So the view should show the Doc1 and a dropdown which have options 1 to 4. The will contain a table of document name and the dropdowns. How can I create the dropdown dynamically?

View 2 Replies

Forms Data Controls :: How To Reflects The Updated Values To The Database

Apr 3, 2010

how to reflects the updated values to the database when i changed values in the Grid view in asp...

View 3 Replies

Architecture :: Concrete Software Engineering Documents Examples For Web Application

Feb 22, 2011

some concrete example of system engegnerring applied on web application?I read a lot of books about uml on web appliation. But i need an concrete example of all documentation about a web application.For example document of analisys, project, databas

View 10 Replies

SQL Reporting :: Prevent VS From Making Changes To Statement?

Mar 23, 2011

So I've built a report but it looks like VS makes changes to the SQL statement (Data tab). Is there a way to prevent this from happening?

View 1 Replies

To Run The Website, Get Error - Could Not Create Type 'umbraco.webservices.documents.documentService'

Jan 11, 2011

I was trying to install CMS for my ASP.NET (Open source Umbraco). After the installation process, when I try to run the website, I get this error: Could not create type 'umbraco.webservices.documents.documentService'. E:UsersSarinDocumentsVisual Studio 2010WebSitesWebSite20umbracowebservicesapiDocumentService.asmx

Here's the line from default.aspx which is showing this error.

<%@ WebService Language="C#" CodeBehind="DocumentService.asmx.cs" Class=umbraco.webservices.documents.documentService %>

View 1 Replies

SQL Reporting :: Error While Rendering Reports (Reporting Services 2005) In .Net 1.1 Web Application On IIS 6.0

Sep 30, 2010

I developed an ASP.net 1.1 web application that is written in VS2203 and I am using Reporting Services 2005 to render some reports in PDF Format. My problem was it is working fine in local (XP) and Production environment (Windows 2003 Server).fromo long back the solution was not working for my integration Server which has windows 2003 Server (1.1) and we installed the 2.0,3.5 frameworks. It is throwing an Object refernce error while render the report. Is there any permisions or something missing.

View 1 Replies

SQL Reporting :: Print Control Works On Reporting Server But Not In Embedded In Application?

Sep 14, 2010

I am having an issue where if I click on the print icon in the report viewer embedded in an application, I get the error "unable to load client print control". However, when running through report manager, this is fine. I am running SQL Server 2005 SP3 and report viewer 9.

View 1 Replies

SQL Reporting :: Create A XML File (document) Using Reporting Service?

Jun 2, 2010

I have a requirement to create a XML file from sql server data.I need to schedule this job to run at specific intervals of time.I don't know, if I could do with Reporting services.I would like to know, if it's possible with Sql server reporting services? how to do that.

View 2 Replies

SQL Reporting :: Dynamic Pass Sql Select Statement From Web To Report Server

Jan 11, 2010

i want to pass sql select statement dynamically from asp.net web page to report server.Depending upon this report has to be generated.

View 1 Replies

SQL Server :: Create Table In A Select Statement?

Jan 27, 2011

I need to execute a stored procedure and show the value it returns as a usertype column in a selection list. Eventually this select statment will be converted into a stored procedure, so basically the stored procedure will be called in another stored procedure. I can't quite get the syntax correct. I am showing a simplified version of a very long query so it's easy to understand. It gives me the 'Incorrect syntax near the keyword 'CREATE' error. The capitalized the code produces the error:

SELECT createdate,
createdby,
usercity,
userstate,

[Code]....

Can I not have a create table statement inside a select statement? I can't move it out of the select statement since

I need to pass the city and state as parameters which are inside the select statement. is there any better way to do this functionality?

View 5 Replies

DataSource Controls :: Use SQL GROUP BY Statement To Create Menu?

Jan 27, 2010

I'm trying to create a menu structure, subpages within pages, for use with my cms. I have 3 tables in sql server, I would like to query all three tables and list those pages with a certain siteid, and subpages where the subid is the pageid. how to use the GROUP BY Statement to create the menu below? Or could I use vb.net to display it for me? Something like this:

sitename
page
page
page
page
subpage
subpage
subpage
page
page

Here is my query so far:

SELECT * FROM sites
LEFT JOIN pages ON sites.siteid=pages.siteid
LEFT JOIN subpages ON pages.pageid=subpages.pageid
WHERE sites.siteID = 1ORDER BY sites.siteid, pages.pagesub ASC

These are my tables:

sites
siteID int Unchecked PK
siteName nvarchar(MAX) Checked
siteAdmin nvarchar(MAX) Checked
siteLive bit Checked
Pages

pageID int Unchecked PK
siteID int Checked FK linked to siteid in sites table
pageLink nvarchar(MAX) Checked
pageBody ntext Checked
pageSummary ntext Checked
pageTitle ntext Checked
pageOrder int Checked
pageHome bit Checked

subpages

subID int Unchecked PK
PageID int Checked FK linked to pageid in pages table
subBody ntext Checked
subSummary ntext Checked
subTitle nvarchar(MAX) Checked
subOrder nvarchar(MAX) Checked

View 2 Replies

Access :: Create A Select Subquery In Insert Statement?

Feb 2, 2010

I am wondering there is no one asking this question on the internet even I have used google. (May be I am using a strange way on this case)

Here is the insert statement with select statement

Insert into a_table (ref, user, pw) values ((Select max(ref)+1 from reference_table), txtUser.text, txtPw.text);

Ignore the sql injection first, this statement is incorrect. Any idea? thx.

View 6 Replies

DataSource Controls :: How To Create An Insert Statement For Two Tables In One Query

Apr 1, 2010

i have a form view that takes fields from two tables 'Contract' and 'volunteers', however because i used a query builder,i have to input an insert statement. How do i create an insert statement for two tables in one query?

View 4 Replies

Web Forms :: Create Warning Message To Avoid The Update Statement In Gridview

Sep 1, 2010

I have a table named [vacation time] with the colums startdate and enddate the table is conected with the [permits table]with the colums permname and permdays(int). i have to create a warning message for the user if the ((startdate)-(enddate)>permday) to avoid the update statement in my grid view.

View 2 Replies

DataSource Controls :: Failed To Create Custom Statement In Query Builder?

Mar 2, 2011

i faced a problem during i want to create inner join in query builder.

Here is my statement

[Code]....

If i select 2 tables, i can get the result. But when i insert 1 more table, i failed to get my result.

View 4 Replies

DataSource Controls :: Create A Multi Column Listbox By Combining Fields In Linq Select Statement

Jan 11, 2010

I am trying to create a multi column listbox by combining fields in Linq select statement, as Let Name = Last + First. The problem is how to pad the Last column with spaces as you would in SQL using REPLICATE so when I bind the listbox to the data, it looks like two columns.

View 5 Replies

SQL Reporting :: How To Create Stored Procedure

Nov 22, 2010

I need to create stored procedure to use it for multi value parameter.. I createdd new data set and changed the type to stored procedure but how can I write my select statement in it?

View 4 Replies

SQL Reporting :: Create Interactive Dashboards?

Jan 11, 2011

I would like to know how to build interactive dashboards using sql server reporting services. I am using the .rdl reports where I can generate a static gauge report but I want my user to interact with gauge at runtime to see its effects .I hope am making myself clear.

View 1 Replies

C# - How To Create Own Reporting Controls With .net Framework

Apr 15, 2010

I want to create fast loading reports like ActiveReports or DevExpress but the problem is I don't know where to start. Also I want it to be light and take less space in setup file.

Does anybody tried to do this? Can I write this component with .net?

This must not be so hard?

View 5 Replies

SQL Reporting :: Create Parameters In A MDX Query?

Aug 19, 2010

I am new to MDX and Sql Server Analysis Service and I've searched this high and low and read a lot of articles, but cannot figure out how.I know this is tough after reading so many articles online, and thus I am only trying my slim chance of getting something helpful from here. I need to create a sales report and want to parameterize the region, so, I'd like to have something likeSELECT blah blahFROM [MySsasWarehouse]WHERE @regionThe @region may take values such as [USA].[Northeast].[New Hampshire], for example.How do I make this happen with MDX? I learned that I can doSELECT blah blahFROM [MySsasWarehouse]WHERE STRTOMEMBER('[USA].[Northeast].[New Hampshire]')But, I have no idea how to have something like STRTOMEMBER(@region)and to be able to pass values to that @region variable.

In the end I would like to create a SSRS report using this MDX query and pass different values to @region. Do NOT point me to articles about how to pass parameters to SSRS, because I know how to do it through the URL query string.My question is How to create parameters for MDX query per se, and I haven't been successful in attempting to do so.

View 3 Replies

SQL Reporting :: Create Rdlc Report On The Fly?

Jul 9, 2010

i was trying to create rdlc report on the fly based on the fields selected.

after some research i found using rdlc/matrix i could create the reports on the fly. i found it from this link.

[URL]

but rdlc/matrix report is based on the xslt templte. How can i create the xslt matrix tempalte for this purpose.

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved