I have written the following code in my web application to start the sql Job
[code]....
what could be the cause of this error. The same code and same ddl its running great in my local PC but it is erroring out when the website is deployed to the web server.
I am working on an ASP.NET project. When I am debugging, I often want to switch back from my browser to Visual Studio (2008) and edit some code. Visual Studio then won't let me edit the code, unless I explicitly quit debugging first.
Is there any way to configure Visual Studio such that is automatically stops debugging and allow me to edit the code, or do I have to stop it manually each and every time?
Disabling Edit and Continue does allow me to edit the code, but this does not force VS to stop debugging...
In fact, I DO NOT want to ask a question but to share one solution to this. One cause of this problem is you did not register your sql express on iis.I installed .net 3.5 sp1, then ran aspnet_iis -i, then installed sql express 2005 advanced. Yes, here came the notorious alert. So, I ran aspnet_regiis again and everything is OK.Run aspnet_regiis before you have installed sql express.
View 1 RepliesI have got a problem tesing paypal sandbox IPN. i have got this error message: IPN delivery failed. HTTP error code 500: Internal Server Error
I could not find out what this error means.
I have hosted a service in the IIS server, while consuming the service i am getting some error. I have mentioned the error code below.
Error code:
Server Error in '/' Application.
The type 'EchoTunnelService.EchoService', provided as the Service attribute value in the ServiceHost directive could not be found.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: The type 'EchoTunnelService.EchoService', provided as the Service attribute value in the ServiceHost directive could not be found.
Source Error: [Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3614
I normally debug my web applications using a local copy of iis. Today while testing that code I suffered a couple of stack overflows. Following that visual studio failed to connect to iis to debug further. After rebooting I was again able to debug my web projects against iis. The annoying problem I have now is that the asp.net development server (Cassini) also starts up when I click start debugging. Does anybody have any idea what could be causing the unwanted server start? I've checked my app properties and use visual studio development server is not checked.
View 2 RepliesLocally I have the cascading dropdown which loads countries in a cascading dropdown working.
But as soon as I place the code on the hosting server, Firebug shows me an:
500 Internal Server Error - [URL]
The cascading dropdown just shows "[Method error 500]"
REMEMBER: IT WORKS ON MY LOCAL SERVER!!!
local configuration:
Windows 7
IIS7.5
ASP.NET4
server configuration:
Windows Server 2008
IIS7.5
ASP.NET4
So it almost MUST be something on my hosting server! :s I dont know what to configure though...
[code]....
I am getting the error above when i click on a button...
View 4 Repliesi get the error:Format of the initialization string does not conform to specification starting at index 0
when i submit information on button click.
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
View 2 RepliesI have modified a part of code of an existing web application. Once it worked fine on my local machine, I moved it to the common server. But, when different users hit the common server, the web application is behaving differently. I tried stopping and starting the website on the common server and it worked fine for sometime around a day and again it started working differently for different users. Then I tried to restart the IIS on the common server and it worked fine for once and again bounced back.Can anyone please suggest the areas where I can check to resolve the issue.
View 3 Repliesi built this application my self. i allready implement this application in 3 office and there's nothing problem. but when i implement this in another office i got some problems with my application. i dont know why, but sometimes i've got error on my server computer. when i've got this error in my server, my client still connect to my server and they can use my application( i have 5 client). this error happen 5 or 6 times a day.
View 3 RepliesI'm encountering the following exception everytime i try and install any of the following.
My Lappy configuration :
64 bit Windows 7 OS
Installed Visual Studio 2010 premium.
SQL Server 2008 Express
Exception : MsiGetProductInfo failed to retrieve ProductVersion for package with ProductCode={'2AFFFDD7-ED85-4A90-8C52-8C52-5DA9EBDC9B8F'}. Error code :1608
SQL Management Studio(x64/x86)
SQL Server 2008 SP1
Exception : There are validation errors on this page. Click OK to close this dialog box. Reivew errors at the bottom SEtup page, then provide valid parameters or click for more information.
Also, when I'm trying to udpdate SQL Server 2008 R2 products using SQL Server Installation Center, it's throwing the following error.
SQL Server Setup has encountered the following error:
MsiGetProductInfo failed to retrieve ProductVersion for package with ProductCode={'2AFFFDD7-ED85-4A90-8C52-8C52-5DA9EBDC9B8F'}. Error code :1608
Is there any compatibility issues with the SQL Server 2008 with 64bit Windows 7 OS ?
I've read several questions explaining how to handle file uploads in asp.net mvc. I am trying to submit both the file as well as form fields describing it. That might be the issue. I'll go write to the code:
View code:
<% using (Html.BeginForm("CreateFile", "Video", FormMethod.Post, new { enctype = "multipart/form-data" }))
{%>
<fieldset>
<legend>Fields</legend>
<p>
<label for="file">Filename:</label>
<input type="file" name="file" id="file" />
</p>
<p>
<label for="Password">Password:</label>
<%= Html.TextBox("Password")%>
<%= Html.ValidationMessage("Password", "*")%>
</p>
<p>
<label for="Description">Description:</label>
<%= Html.TextBox("Description")%>
<%= Html.ValidationMessage("Description", "*")%>
</p>
<p>
<label for="DateUploaded">DateUploaded:</label>
<%= Html.TextBox("DateUploaded")%>
<%= Html.ValidationMessage("DateUploaded", "*")%>
</p>
<p>
<label for="DateRecorded">DateRecorded:</label>
<%= Html.TextBox("DateRecorded")%>
<%= Html.ValidationMessage("DateRecorded", "*")%>
</p>
<p>
<input type="submit" value="Submit" />
</p>
</fieldset>
<% } %>
Controller code:
[AcceptVerbs(HttpVerbs.Post)]
public ActionResult CreateFile(VideoDTO video, HttpPostedFileBase f) //[Bind(Exclude="VideoId")]
{
foreach (string file in Request.Files)
{
HttpPostedFileBase hpf = Request.Files[file] as HttpPostedFileBase;
if (hpf.ContentLength == 0)
continue;
string savedFileName = Server.MapPath("Videos") + Path.GetFileName(hpf.FileName);
hpf.SaveAs(savedFileName);
video.FileName = hpf.FileName;
}
repository.CreateVideo(video);
return RedirectToAction("Index");
}
I've seen several examples, but haven't come across one that is trying to submit both a file and other form data. Some other things of note is other examples seem to not put a HttpVerb attribute on the action method at all and have an empty parameter string. The files I'm looking to accept will be video files of various types but they can be anywhere from 100-300 mb. The files I've attempted to use (locally) have been rather small comparatively (50 or so mb).I know it's been asked but I feel like my issue here is different somehow. When I submit the page I see:
The connection was reset
The connection to the server was reset while the page was loading.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The message could not be sent to the SMTP server. The transport error code was 0x80040217. The server response was not available
Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Following problem occurred:
sending mail error
code for sending mail:
private void SendMail (string from, string to, string subj, string body, string dom)
{
System.Net.Mail.MailMessage mm = new System.Net.Mail.MailMessage ();
mm.From = new System.Net.Mail.MailAddress (from);
mm.To.Add (new System.Net.Mail.MailAddress (to));
mm.Subject = subj;
mm.IsBodyHtml = true;
mm.Body = body;
System.Net.Mail.SmtpClient client = new System.Net.Mail.SmtpClient (dom);
client.Send (mm);
}
error (exeption):
The server has violated protocol Server Response: <some code> // was translated from russian
if I test on my computer, everything works perfectly When I throw code to the server,programm throws an exeption
using vb.net/asp.net 2005
when a user enters a bad email I am doing a check on this and throwing an exception message as follows, this works fine on the test site but for some reason the same code on the live site gives a "internal server error" (http code 500). The code below:
[Code]....
not certain why this is happening, I assume that it's some server or config difference between the test and live sites. has anyone seen this before? For a quick fix i'm registering javascript alert and showing the same text so it works but I would like to figure out why the code above is not working.
Error:
Executed as user: MACSTEELUSA.COMsa. ...9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:00:17 PM Error: 2010-06-02 20:00:18.56 Code: 0xC0202009 Source: CRM_ORACLE_ARSUMMARY Connection manager "SourceConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client
and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2010-06-02 20:00:18.58 Code: 0xC020801C Source: Data Flow Task Source - Query [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireCon... The package execution fa... The step failed.
Tasks Taken:Went to this folder checked for tnsnames.ora file but it is in good shape.
C:ORACLEproduct11.2.0client_1
etworkadmin
Background: I use SQL server 2005 developer edition and visual studio 2008. Visual studio 2008 is running on a local machine with Vista business edition. SQL server is running on a remote server using Windows server 2003. Both computers are within the same domain.
Problem: First, I used the server explorer to connect to the SQL server. Everything works as desired. Then I write code to do the same thing. I keep getting the following error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
However, I used the exactly identical connection string as the one used in the server explorer. So connection string should not be the problem. In addition, I tried the test code in MSDN, which tells whether my domainusername can flow the network. It turns out the user name is fine. I also went to the SQL server management studio and found the login for my computer is NVCWeihao while my computer login name is NVCweihao. I am wondering if this uppercase letter really affects the connection.
I just installed sql server 2008 R2 on my computer. I am trying to connect to sql server throught my C# code and everytime I run the C# program,
I get this error "A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) "
The connection string that I used in my web.config file is
[Code]....
I am not sure what am I doing wrong, but I followed this article below step by step and still I am getting the same error
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
My instance name is MSSQLSERVER and the server that I am using is on my local machine and it has my computer name in it.
When i try to execute the code below i get the error "unable to connect to remote server".
The internet connection is set and if i copy and paste the serviceurl directly on the browser it works.
public string GeoCode(string address)
{
if (String.IsNullOrEmpty(address)) throw new ArgumentNullException("address");
string ServiceUrl = "http://maps.google.com/maps/geo?output=xml&q={0}&key={1}&oe=utf8";
string url = String.Format(ServiceUrl, HttpUtility.UrlEncode(address), MyApiKey);
System.Net.HttpWebRequest request = (System.Net.HttpWebRequest)System.Net.WebRequest.Create(url);
request.Method = "GET";
using (System.Net.WebResponse response = request.GetResponse())
{
return response.ToString();
}
}
I've created a small website with a simple sqlite database using vwd 2010 .net 4. In dev and test envionments everything works fine, however when i promote to my hosting provider i receive the following error:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I've been configuring the connection strings (autogenerated from entity framework and attached db) but unable to get it working on the hosting provider, I'm assuming it's related to permissions but not entirely sure how to resolve - here's the web.config as it stands:
<add
name="ApplicationServices"
connectionString="data [code].....
For info the environments are set up as follows:
- Dev environment is vwd express 2010 with sqlite mdf attached
- Test environment is windows 7 server, iis 7 with appdomain identity set to network service
I have got an error "server response error : Unknown server error" while uploading file using Ajax AsyncFileUpload, code behind function is triggered while uploading, but after code behind function executed, we are getting this error.
View 1 RepliesI have a serious problem with "Error on Page". The error message points to line number 939, char 13. In my code behind (C#) in line number 939 is only an obsolete method found which is no longer called. The aspx file has only 339 lines. What the heck is line number 939?The Webapplication allows a special user group to change some group memberships for members of another user group in Active Directory. The App handles 3internal DataViews derived from corresponding DataTables as DataSource for 3 GridViews and some other internal lists with objects (List<obj>).
It uses windows authentication to get current users credentials and his membership in the "Operators" group. This credentials will be passed-through to allow the process managing group memberships in active directory.After starting the App in browser it seems to work fine. But after an indeterminated time it doesn't longer respond. After each click on buttons (or link buttons) you only can see the message "Error on Page" in the browsers status bar below.I played with session timeout, storing the DataTables in session variables, without success.
Last week I found this article here: [URL]" and I addedEnableEventValidation="false" ViewStateEncryptionMode="Never"
to Page declaration. However, at some point the the server does not respond. Each time the worker process on webserver recycles it seems the application turn to wrong state. Might be important: All controls including GridViews are embedded in an AJAX UpdatePanel. How to get a better error message? Debugging is enabled and Custom Error handling On, Off or Remote Only brings the same result as described.
why I'm getting this error? I just re-created (not migrated) my app that was in ASP.NET 1.1 to ASP.NET 2.0. Whole app works perfectly. The only problem I'm getting with this piece of code for the Web Services. I'm running both versions at the same time side-by-side and it works fine in 1.1 and doesn't work in 2.0.
URLName = Context.Request.Url.Segments
URLName0 = URLName(0)
URLName1 = URLName(1)
URLName2 = URLName(2)
URLHost = Request.UserHostName
URLStr = "http://" & URLHost & URLName0 & URLName1 &
"SomePage.aspx?" & "SectionID=" & SectionID
' Create a 'WebRequest' object with the specified url
Dim myWebRequest As WebRequest =
CType(WebRequest.Create(URLStr), WebRequest)
' Send the 'WebRequest' and wait for response.
Dim myWebResponse As WebResponse =
CType(myWebRequest.GetResponse(), WebResponse)
Bam! Error! The remote server returned an error: (500) Internal Server Error.
