Error occured: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
View 3 RepliesI'm using ASP.NET 3.5 (c#) with SQL Server 2008 server. Recently, I started getting error "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.".
After looking at forums for solutions, I added the below common code to my application.
[Code]....
However, intermittently, I'm still getting the timeout error. I added the logging to see where error is occuring. And found that before executing one of the query, it is giving this error. Now, my assumption is that I should have received this error after runnign query for 600 seconds (10 minutes) since I set it in the above function. But the timeout error is occuring instantaneously within 1 second itself. In the log, I printed one line above & after the query to identify how much time it would take. Surprisingly, the log says that 9:00 AM "Before query execution" & at 9:01 AM "timeout expired...."
I have the problem of Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.
I am opening and closing SqlConnection properly.
I am getting this error:
"timeout expired. the timeout period elapsed prior to obtaining a connection from the pool"
when I am testing my webiste on production server. Its working perfectly on my local machine but not on production.
Sometimes it works and sometimes not.
am getting "Time Out Expired,The Timeout period elapsed prior to obtaining a connecttion from pool".Please suggest suddenly i am getting this error in 10% of the pages.
View 2 RepliesI have stored procedure, execution time is just 1 sec, returns 20 rows.I droped it on my LINQ2SQL diagram (.dbml).But when calling it from LINQ2SQL it hangs and after some time throws an exception:
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
Piece of code from dbml:
[Code]....
I have creetaed OSDesign using VS 2005.Later,I have created device application and I am using emulator created from OSDesign as device for connection.When I debug it gives error as, This operation returned because the timeout period expired
View 2 Repliesi have two stored procs. when th 1st stored proc runs i want to be able to use this value returned from the stored into another stored proc.
my first stored proc is:
[Code]....
which returns [Transfer_stations_Authority_name] = 'Blackpool'
now i want to use this value into my second stored proc@
[Code]....
[Code]....
I am working on one application and it has report functionality in it. i have one stored procedure which is doing some calculation and inserting whole calculation in one table and then that table will show up in one report..this insertion procedure may have to insert 5000 number of records or more than that so while my stored proceudre is executing that calculation and insertion part, my application is thorwing below exception :
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.i have set timeout in web.config i.e. timeout=10000000...still throwing an exception
i have the following stored proc that inserts data into a database based on a stauts field. the first stored proc inserts into the first table and i am trying to get the identity field out as i need this value for the next stored proc. the first stored proc works fine and inserts the data but the secnd one doesnt, even though there is data there.
[Code]....
I have written a stored proc for raise error.Whenever a customer checks for a record in the DB that doesn't exist in the DB he has to get an error displayed.I have written a stored proc help me on it i know it is wrong suggest me the correct one.
[Code]....
i am trying to write a stored proc that takes data from one table based on a field in that tabke and writes that data out to another table with the eventual idea that this data is deleted from the original table it was read from. my stored proc is as follows:
[Code]....
but i keep getting an error: incorrect syntax near 'BACKUP_TWS_Waste_Colection_Request'.
I hope to one day figure this looping records from a table to update it, but i cannot get this to complie, I guess cause I am not
versed in looping in sql yet :(
[Code]....
I just want to get data from a table per record run the stored procedure(i have nesting on) and update the record's fields with the values that were returned from the Store procedure. The Stored procedure is working fine.
I'm converting Active X code in DTS to Script Task for SSIS and I'm having trouble creating an XML file from my stored proc. Here's the code:
[Code]....
It throws an error on the dataAdapter fill saying:
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '<'.
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '<'.
Msg 132, Level 15, State 1, Line 5
The label 'sql' has already been declared. Label names must be unique within a query batch or stored procedure.
Is it possible to call 1 Stored procedure from another withing a sql query
sp1 :
select ID1,ID2,ID3,ID4 from table1 ;
sp2 :
select name from table2 where ID = ID1;
I want to get corresponding names of ID1,ID2 and ID3,ID4 in sp1 as a query result.Is it somehow possible to call sp2 from sp1?
I could probably figure this out if I tried to, but I have been working so long on code, I'm a little fried
I have a stored procedure, and I want to execute another stored procedure during a time period of lets say 1/1/2011 to 12/31/2011
How Would I accomplish this?
I have a GridView sourced by a SQL Server stored procedure with several databound fields, including a money column for item values. My stored proc returns the data through a SELECT and everything looks good. The stored proc also has a single output parameter that sums the total value of the displayed data, and this value is displayed in a label above the GridView.
View 7 RepliesI have to write stored proc to get the daily transaction for a specified date. Right now what i do is everytime i log a transaction in table3 I update table 2 with the count. Then i use table 2 to write the stored proc and to get the desired result. I have pasted my stored proc below with the output. My problem is when another subsystem is added in the AppInfo table i need to update my stored proc because i have hardcoded the subsystem name.
[Code]....
I have a stored proc. that returns the USL & LSL values for each of the 8 different Metrics. say, Defect Density (Upper Specification Limit) USL = 0.30 & Defect Density (Lower Specification Limit_ LSL = 0.05). Simillarly for 8 different Metrics. Why I need these Spec. Limits ?...Because I want o compare my project's Metrics Value displayed in the Grid View with the corresponding USL & LSL value of the same Metrics. IF Metrics Value is outside of USL & LSL Then I want to Mark the Metrics in Red Color.
1. STORED PROC "Get_Spec_Limits" Does Not Return Anything
2. Error : Object Reference Not set to an Instance of an Object, in the following "OnRowDataBound' Event
OnRowDataBound="GridView1_RowDataBound"
Protected Sub GridView1_RowDataBound(ByVal sender As Object, ByVal e As GridViewRowEventArgs) Handles GridView1.RowDataBound
Dim strConnection As String = "Data Source=******;Initial Catalog=Metrics;Integrated Security=True"
Dim objConnection As New SqlConnection(strConnection)
Dim da As New SqlDataAdapter("Get_Spec_Limits", objConnection)
da.SelectCommand.CommandType = CommandType.StoredProcedure
Dim Productivity_USL As New SqlParameter("@Productivity_LSL", SqlDbType.Float)
Dim Productivity_LSL As New SqlParameter("@Productivity_LSL", SqlDbType.Float)
Dim IDD_LSL As New SqlParameter("@IDD_LSL", SqlDbType.Float)
Dim IDD_USL As New SqlParameter("@IDD_USL", SqlDbType.Float)
Dim EDD_LSL As New SqlParameter("@EDD_LSL", SqlDbType.Float)
Dim EDD_USL As New SqlParameter("@EDD_USL", SqlDbType.Float)
Dim DRE_FS_LSL As New SqlParameter("@DRE_FS_LSL", SqlDbType.Float)
Dim DRE_FS_USL As New SqlParameter("@DRE_FS_USL", SqlDbType.Float)
Dim DRE_TS_LSL As New SqlParameter("@DRE_TS_LSL", SqlDbType.Float)
Dim DRE_TS_USL As New SqlParameter("@DRE_TS_USL", SqlDbType.Float)
Dim DRE_Code_USL As New SqlParameter("@DRE_Code_USL", SqlDbType.Float)
Dim DRE_Code_LSL As New SqlParameter("@DRE_Code_LSL", SqlDbType.Float)
Dim COQ_USL As New SqlParameter("@COQ_USL", SqlDbType.Float)
Dim COQ_LSL As New SqlParameter("@COQ_LSL", SqlDbType.Float)
Dim COPQ_USL As New SqlParameter("@COPQ_USL", SqlDbType.Float)
Dim COPQ_LSL As New SqlParameter("@COPQ_LSL", SqlDbType.Float)......................
I've modified an existing strored procedure. It originally had one ouput parameter in the stored proc and it was set up as follows in the c# code that called it:
cmd.Parameters.Add("@Var1Param", SqlDbType.BigInt);
if (Var1 == 0)
cmd.Parameters["@Var1"].Value = DBNull.Value;
else
cmd.Parameters["@Var"].Value = Var1;
cmd.Parameters["@Var1"].Direction = ParameterDirection.InputOutput;
cmd.ExecuteNonQuery();
// Get Var1
Var1= dataMorph.ToInt64(cmd.Parameters["@Var1"].Value.ToString());
Just to clarify, this parameter was declared as OUTPUT in the stored proc but as inputoutput in the C# code. This worked fine. I have added another parameter to the same stored procedure and I want to retrieve both from the C# code. The C# code now is as follows:.................................
How to export binary data from table to filesystem via stored proc
View 2 RepliesI need to get IIS Logfile data from Stored Proc. How to do this. I am using Bulk Insert Method in my stored Proc When I execute the stored proc I am getting an error that
[Code].....
I wanted to know how to prevent more than one user from uploading the report at a time .
This is a Windos based app written in c# . When User A clicks Upload option on one server from the menu to upload the files and at the same time when User B clicks Upload option on different server , User B should be alerted a message saying "User A's uploading is in progress,pls wait" . How to achieve this, with the code..I am thinking this logic should be kept in a stored proc, How do I write that proc?
What I'm trying to do is fill in a questionnaire, and have the option to not complete it then it automatically saves, once clicked on "Save" button. However, what I want to search for is previously non-completed questionairres.
Would I have a "status" field in the questionairre table to trigger either "completed"/ "non-completed" when the "Save" button is clicked (in the event of non completed questionaires? How is this normally done?? Im sure there are a hundred and one different ways to do it!
VWD 2008 Express. IIS 6.0. Forms Authentication.My web site uses forms authentication (in case that makes a difference). Folks who are using the site indicate that it is timing out on them (logging them out) before they can finish some entries. How can I increase the timeout period? The following is my web.config file in my root directory:
[Code]....
Here is the web.config in the subdirectory to which all users are directed at login:
[Code]....