SQL Server :: Update Statement Not Updating Records And Returns No Errors?
Sep 16, 2010
I am running an Update statement against an SQL database on server 2008. The update runs but does not update the record, but returns no errors.The database is part of a commercial help desk package called TrackIt 8.5 which was just a fresh install on a new web server and a new sql server. The update is running from a web form we use to automatically create active directory accounts. After the account is created the web form closes out the work order in the Trackit db. This was working fine when the system was running on Server 2003 and SQL server 2005. Running Trackit version 7.02.The login use to access the database has full permissions to read and write to the database, just as it did on the old server which never had an issue updating. Odd thing is, if I log onto the SQL server and make a change to any single field in that record. I can then run the web form and it updates the record normally.
View 3 Replies
Similar Messages:
Jan 25, 2011
using ASP.NET 2.0 SqlDataAdapter update returns 0 records. I have a simple application that stores Passenger's ticket info in a sql database.
when a user clicks "Create Reservation" I add a Passenger Information (name, destination, PNR) to dataset
and save dataset in ViewState.
Then when user clicks update, I pull the dataset from viewState and try to update database. The update is returning 0. what i am doing incorrectly?
protected void btn_CreateReservation_Click(object sender, EventArgs e)
{
DataRow dr ;
dr = dt.NewRow();
dr["Name"] = txtBox_Name.Text; dr["Destination"] = txtBox_Destination.Text;
dr["PNR"] = Convert.ToInt32(txtbox_PNR.Text); dt.Rows.Add(dr);
dt.AcceptChanges();
ViewState["MyTable"] = dsPassengers;
[Code]....
View 1 Replies
Jan 5, 2011
I have a table line (ID, LineNo, LineName) having values as :
1, 1, <blank>
2, 2, <blank>
3, 3, <blank>
ID is PK with Auto-Increment and LinNo(I am manually incrementing through ASP.Net Page while record insertion) Now i have to write a query such that it updates LineName column from line table which is blank(as shown above) with values from table linet(linenamet) having values as :
a
b
c
My trial query is :
update line set LineName = (select linenamet from linet);
It gives ERROR as : Subquery returns more than 1 row
Expected Result : After Updation it should show line table as :
1, 1, a
2, 2, b
3, 3, c
View 8 Replies
Feb 24, 2010
I am writing a simple form that will take in data and insert it into a db if it's a new record and update the existing record if it already exists. The insert works fine, but the update isn't working at all, yet the code looks solid to me and everything I've compared it to in my google searches.
[Code]....
View 7 Replies
Jul 11, 2010
I have a simple table. (with PK). I have created a tableadapter that selects all fields and filters with a control parameter. This works fine. The results are displayed within a DetailView control. All okay up to this point. I have then enabled 'Editing'.I can then click on the edit and change the text, but when I click the edit button the page updates but the value has not changed in the database?
View 4 Replies
Sep 22, 2010
In my data table i have a Date Column with of type DateTime.
In my sql select query, I want to return all records where the date is today.
View 8 Replies
Sep 15, 2010
If I want to update 1000 records at a time in the database what is the best approach.
View 6 Replies
Mar 9, 2011
I hope to one day figure this looping records from a table to update it, but i cannot get this to complie, I guess cause I am not
versed in looping in sql yet :(
[Code]....
I just want to get data from a table per record run the stored procedure(i have nesting on) and update the record's fields with the values that were returned from the Store procedure. The Stored procedure is working fine.
View 6 Replies
Oct 14, 2010
I have a function that checks for a username and if it finds the username it will allow the user to update the user, there are 3 main columns: Name,Age,isFemale. I have the enduser supply the information and then I try to update the record but I get a sql error for "not a valid" column.console app:
[Code]....
I pass the spIsFemale by using an enum, here is the Person Class with function.
[Code]....
I get an error that column isFemale is not valid. The isFemale column is a bit type. If it's a 1, it's a female, if 0 male. this is more of a test area and I'm trying to update records or create new one's if the name does not exist.II am new to C # and I am just trying to learn new ideas and methods within C sharp.
View 2 Replies
Feb 27, 2011
The following stored procedure updates the value in LeaveTransaction table.
[code].,...
My Question here:
I have written the above trigger,which would update the value for the corresponding records in another table ie) LeaveCumulative table. The trigger is not updating the value in the designated rows in the leavecumulative table. Whereas when I excute the same update command separately in the Query Editor window the trigger is working fine.
View 1 Replies
Mar 19, 2011
there is a field in my table WATERMARKED_IMAGE which is null at present...i want to insert value in that column....at the same time i want to update a column FLAG.
so should i use insert or update query??
SqlCommand storeimage = new SqlCommand("update WATERMARKED_IMAGES set WATERMARKED_IMAGE=@bmp,FLAG=@flag where (WID='" + wid + "' )", connection);
storeimage.Parameters.Add("@bmp", SqlDbType.Image,bmp.Width).Value = imtobyte;
storeimage.Parameters.Add("@flag", SqlDbType.Int, 50000).Value = Flag;
View 1 Replies
Mar 28, 2011
I wanted to update IsValid=1 if FirstName is not null or LastName is not null, for this I wrote a below query
UPDATE USER_TABLE
SET ISVALID=1
WHERE FIRSTNAME IS NOT NULL OR LASTNAME IS NOT NULL
But this does not work properly, it will update all recordscould I know how to alter my query to my purpose
View 7 Replies
Jan 4, 2010
i have this function in sql server 2000
[Code]....
but it return a lot of error when i check the sintax where is the wrong?
View 5 Replies
Jan 29, 2010
I searched many posts in this forum and could not find good answer ,I almost tried all the suggestions in this forum for similar issue,So please don't say there are many posts to refer in this forum.Iam trying to fax a pdf document which is auto generated by the ItextSharp tool.Iam using ItextSharp PdfWriter for generating a pdf ,which writes the pdf in a file.Until this point everything is ok,I get the pdf document as expected.What would like to do is to send this pdf via email or fax based on the user input.Iam fine with sending this pdf as an attachment to the user's email.Problem arises is when iam trying to send a fax.I am using the input text value as the Receipent Fax Number(Right now iam concentrating by giving a valid fax number).Iam using the below code for faxing the document and receive the below error.
String number=txtFax.Text.ToString().Trim();
FaxServer server=new FaxServerClass();
FaxDoc doc=null;
[code]...
View 1 Replies
May 19, 2010
Here is my situation: I use the SqlCommond to update some records in the SQL Server in a ASP.NET web site. Users can choose which records they want to update. Sometimes they may choose 40 or 60 records to update at a time.Is there any good way to do it? I do not want to do like it
foreach(string ID in List)
{
Update here
}
View 3 Replies
Jan 21, 2010
When I run the code below, it works
int charId = int.Parse(Request.Params["charId"]);
EveFPT ctx = new EveFPT();
var theCharQuery = from a in ctx.tblChars
where a.id == charId
select new
{
Name = a.name,
CorpName = a.tblCorps.name,
AllianceName = a.tblCorps.tblAlliances.name
};
if(theCharQuery.Count() == 1)
{
var theChar = theCharQuery.First();
lblCharName.Text = theChar.Name;
lblCorpName.Text = theChar.CorpName;
lblAllianceName.Text = theChar.AllianceName;
}
However, If I the below
var theCharQuery = from a in ctx.tblChars
where a.id == charId
select a;
if(theCharQuery.Count() == 1)
{
tblChars theChar = theCharQuery.First();
lblCharName.Text = theChar.name;
lblCorpName.Text = theChar.tblCorps.name;
lblAllianceName.Text = theChar.tblCorps.tblAlliances.name;
}
the statement theChar.tblCorps always returns null.
View 2 Replies
Jan 13, 2011
Select % from Table1 where Type in ('Apple','Orange') is not returning value
View 3 Replies
Oct 26, 2010
CDC or Change data capture is a new feature in SQL Server 2008, which is an ability to record changes to table data into another table without writing triggers or some other mechanism, Change data capture records the changes like insert, update, and delete to a table in SQL server.I have sql 2005 and I have created triggers and tables CDC to capture the data. everything functions good and the data is being updated in the _CDC tables. all i need to do now is to generate the updated data as a report (excel/html)- what should I do ......?i need to show only the updated columns when user selects the date periods ( Range between dates ) and the person name - i need to display any updated info about that person during that period. So this updated columns about this person should be displayed in excel formatted column wise.
View 2 Replies
Jun 5, 2010
How come my query returns 0 records?
SELECT WebSiteID, BanDate
FROM tblWebSite
WHERE (BanDate <> NULL)
The BanDate is a date column. There are date times through the table in this column. I just want the ones with a date and ignore the rest.
View 2 Replies
Feb 8, 2011
Using a SubSonic (2.2) SqlQuery object, I am querying a view that contains distinct rows from another table. The results of the query, however, contain multiple rows for certain rows in the view. It appears to be because of a join on a temporary table in the query generated to achieve paging. How can I avoid this duplication of rows?
Bonus points: I have to use the view because SubSonic can't do .Paged() and .Distinct() at the same time. Why not?
View 1 Replies
Apr 27, 2016
This is the query I am running in DB:
select UM.USER_NAME, RM.ROLE_ID, RM.ROLE_NAME
FROM [MICommonDB].[dbo].[ROLE_USER_MAPPING] as RUM
join [MICommonDB].[dbo].[ROLE_MASTER] as RM ON RM.ROLE_ID=RUM.ROLE_ID
join [MICommonDB].[dbo].[USER_MASTER] UM ON UM.USER_ID = RUM.USER_ID
where UM.USER_NAME='useruser'
which is giving me proper result(i.e., 2 records) when running in SQL server.
Now I have created below method in a class with same query (I am calling this method inside Controller):
public IEnumerable<RoleUserDO> getRoleNameByUserName(string userName)
{
IEnumerable<RoleUserDO> strResult = null;
strResult = (from RUM in oDBContext.ROLE_USER_MAPPING
[CODE]..
but it returns only 1 record instead of 2 records(when compared with DB query)
View 1 Replies
Feb 24, 2010
I have a table "Table1" which has mani 3 fields ID: int,
Date1: datetime,
Date2: datetime
All fields are filled except Date2, so I want to copy the records in Date1 to Date2I tried this query, but it didn't work
[Code]....
View 3 Replies
Aug 30, 2010
My project includes a grid view with some updtable fields, some fields throw an error on update and some do not and it does not really make sense. WORK_STATION_ID does not cause an error, ROOM _ID cause an error, both are int? (I am using c#) and for update I use the code liste below.
[Code]....
[Code]....
View 1 Replies
Jan 12, 2011
Above is my code to call a hidden DIV:
[Code]....
And above the html for the DIV:
[Code]....
on Code behind:
[Code]....
Now i was trying to use an UPDATE PANEL, in order to when i click button Save, only the DIV updates. Because the whole DIV is closing when i click on SAVE, even if i put a div in an update panel.
View 4 Replies
Dec 9, 2010
I am having a weird issue with the update panels. I have an update panel in UpdateMode = Conditional . I have a dropdown list and a grid view..the gridview has to be updated ÖnSelectionChanged event on the dropdown.
The issue here is on changing the selection on dropdown, the onselectionchanged event is triggered, new data is grabbed, bound to gridview..but does nt update the update panel even after the updatepanel.update();
[Code]....
View 2 Replies
