I have a sql datasource with the ControlParameter called ddlDropDownList.
2 questions:
1. Is my syntax below ok, I am getting a runttime error that the syntax is incorrect.
2. I have the select statement set up the control parameter to get the selected value from the dropdownlist as shown below, is that syntax correct? especially the "selectedItem.value" for the propertyname property.
[Code]....
[Code]....
i trying following query Select
View 4 RepliesI have a select statement:
cmd = new SqlCommand("select lab_key from tblorderwhere", connection);
I would like to add a where statement that pass variable to the select statement. How I can do this?
Where lab_key =ChargeFine( that is my variable)
I have been working on a stored procedure to calculate likert scales for course evaluations. I have the stored procedure done but I ran into an interesting but frustrating situation.
I used a case statement along with a select query to count the number of responses of a given value. Likert scales are usually 5 point scales 5 being the highest and 1 being the lowest. The value that gave me the trouble was null values. In my evaluation page the instert query puts a null value in the field instead of leaving the response blank. These are the two queries I used both are syntactically correct but one works and the other doesn't. #1 Null query that works
[Code]....
Can anyone explain the differences and why one works but the other doesn't? Can it be as simple as switching the WHEN and the column name and if it is would it be advisable the other ones around?
I am using a SP to insert into tables base on the parameters but getting syntax errors on:
Msg 156, Level 15, State 1, Procedure Dyno_InsertNewItem, Line 27
i want to get one value from function using case statement,i tried it but not work
CREATE FUNCTION [FATMS].[fnReturnByPeriod]
(
@Period INT
) [code]....
why the case statement is never running
[Code]....
[Code]....
I created a function and am trying to access it through a case statement, but I am getting the error:
Cannot find either column "core" or the user-defined function or aggregate "core.f_FiscalYear_Open_Days", or the name is ambiguous.
The case statement is below:
CASE
WHEN c.program_id
= 5
and
CAST(minutes)
As
float)/60
>=
@MiddleSyTargetHrs
/core.f_FiscalYear_Open_Days(c.program_id,Org_Site_ID_Contract,'7-01-2009','7-31-2009')
Then 1
Else 0
End
As
mon_1_hrs
I am trying to do an insert statement to a table from classic ASP.I tried the below:
[Code]....
But, I am getting the error as: Incorrect syntax near the keyword 'where'.How to insert data, using a where clause in the above scenario?
I have a requirement in my app to find out if a certain row exists in a table and then if it does get some fields from another row
I have two parameters an EventId and a UserId.
This is the normal statement I would use to get that row
[Code]....
Then I would check if the result > 0. If it is greater than 0 this is the statement I would use to get the other details
[Code]....
So how can I join this into one statement? This is what I have tried
[Code]....
I am using Linq to SQL. Tables have timestamp columns and I am using regular Linq methodology in ASP.NET MVC.I do use detached entities and always try to do updates without first querying the database for the original entity. To update an entity I use context.Attach(entity, true) followed by context.SubmitChanges() and all is fine. The sql statement that gets executed looks like:
[Code]...
I have the following statement:
List<string> tracks = new List<string> { "ABC", "DEF" };
var items = (from i in Agenda.AgendaSessions
select i).Where(p => p.Tracks.Any(s => tracks.Contains(s.Code)));
this returns all sessions which track contains either ABC or DEF, now when I rewrite the statement like the following, it returns All sessions regardless, as if the clause always yeilds into true,
var items = from i in Agenda.AgendaSessions
where i.Tracks.Any(s=> tracks.Contains(s.Code))
select i;
Update
if there are other clauses within the where, does that affect the results?
I need to excute one insert query basend on two different if conditins. If one of them conditions is true then excute block of code.
For Example,
if exists( select * from tablename where docid = @docid and adv_feed <> 'sent' ) or
if not exists (select * from usaa_audit_fields_log where docid = @docid)
begin
insert statement
end
I have tried using OR statement between them but it doesn't work.
Working on a heavy ajax based site with over 100 methods from all the ajax calls inside each of each controller all with basically the same code.Was thinking of changing them to a big case statement for readability which would keep the code a bit more dry and make it easier to read.What I am wondering is: Will there be a performance hit and is there a better way to deal with it?
View 4 RepliesI need to modify the results (NULL) to reflect '0.00'.
My query statement is giving me an error at the CASE level.
[code]...
I have some textboxes and radio buttons in my form, and when the user clicks the "Search" button, an SQL select query is run from an SQLDataSource and that query populates a gridview. I want some of the values in these textboxes/radiobuttons to act as search criteria and I'll form a WHERE clause based on what the user typed into them. How do I do this?
View 8 RepliesI'm using parameterized sql query to get data from database
string query = "Select * from employee where employee_city in (@value)";
strign city ="'NewDelhi','Bangalore','Mumbai'";
I'm using following code to achive this
[code]...
But this is not giving the result. If run the query in SQLServer query window as "Select * from employee where employee_city in ('NewDelhi','Bangalore','Mumbai')", records are there.
But the same query will not return any records from ADO.Net.
When doing a query e.g. "select ID from myTable order By SomeStringField" from SQL Developer my data the data are sorted correctly according to database settings:
Abc
abc
Bcd
bcd
But when using the System.Data.OracleClient namespace and a DbProviderFactory to create a DbCommand and use that to create a DbDataReader, the data is sorted case sensitive:
Abc
Bcd
abc
bcd
Is there some setting on the command which needs to be set? Can you even change the case sensitivity in the .net framwork, overriding the database settings?
I am very new to AD and querying it. If you can, how do you specify case sensitivity in the LDAP query?
I have a series of methods that convert a lamda expression into an LDAP query but i don't know the syntax for case-sensitive searching.
The field it is searching is case-insensitive but as it is a base attribute i don't want to modify it.
I know I'm missing something here but I can't figure out what it is. I've got a query joining three tables....accounts, payments, and a table linking the two (there is a M:M relationship).I'm trying to pull a list of all accounts in the account table that have a payment that needs to be resequenced, and also the maximum payment priority if there are any payments that haven't been fully paid. If all payments HAVE been fully paid, I want to return a 0.
It's that last bit of logic that I can't get right. If I include that in the where clause, I get only the accounts that have a payment that hasn't been fully paid. If I take it out, I get all the accounts I get, but I get the highest payment priority whether or not the payment has been fully met.
Here is the query....how do I include the where clause criteria but still include all accounts?
select distinct
bat.acct_id,
isnull(max(isnull(crt.pymt_priority, 0)), 0)[code].....
I have my project set up with the virtual path "/MyVirtualPath", create the virtual directory in IIS 6 (W2003) and everything works fine. Then to work better with Google Analytics I change the virtual path "/myvirtualpath" and change all redicecciones and links to lowercase. also applies the class "lowercase route urls in aspnet mvc" and works perfectly.
The problem I had to modify the virtual directory in IIS, delete virtual path "/MyVirtualPath" and I created the new "/myvirtualpath", but in all cases I use tilde "~" or where I make a "RedirecToAction" (which should take "LowercaseRoute"), continues to maintain the virtual path "/MyVirtualPath". For example, if I see the HTML source code in the browser, see "/MyVirtualPath/Content/Site.css" instead of "/myvirtualpath/Content/Site.css. "
I'm having trouble writing what should be a simple sub-query using LINQ to Entities. I have two tables: Customers and Orders that have a relation on the CustID field. Not all Customers have a record in the Orders table, while some have mutiple records. In traditional SQL, you could write the query like this: SELECT * FROM Orders where CustID IN (SELECT CustID FROM Customers) I know this could be done as a JOIN in both SQL and L2E, but my actual query is more complex (about 8-9 joins), so I am hoping to find a L2E sub-query equivalent. Something like this:
[Code]....
I know LINQ to Entities does not support the " IN " clause, so I am looking for something that will work in its place.
I am not able to understand what is the problem with My sql ..as same query is run sucessfully while i use SQL Server 2005 whit out any Exception or error.........
Select Count( Date ) From Attendancemaster
Error in SELECT clause: expression near ')'.
Unable to parse query text.
this is very simple query run sucessfully in SQL Server 2005 but not in
MY SQL and giving Error..and the query on which any datetime avar comes in WHERE clause allso generate error always....?
I have a query with group-by clause. I want to use it in recusionCTE.How is it possible?I want to know the totalamount for each fname done through this query:select top 10 fname,SUM(totamt) as 'Total Amount' from tables_list group by fname order by 'Total Amount' descBut when any person logins he must be able to see this list for his own hierarchy down the line including himself.
View 2 RepliesI have created the folowing stored procedure and it is working fine... I have used OVER clause in the query written in the WITH block. Can some body provide description about working of OVER clause and why I need to use it with the ROW_NUMBER() function.
CREATE PROCEDURE SelectOrder
@PageIndex INT,
@PageSize INT
AS
BEGIN
WITH Order AS
(
SELECT ROW_NUMBER() OVER (ORDER BY OrderId DESC)
AS Row, *
FROM Orders
)
SELECT *
FROM Order
WHERE Row between (@PageIndex - 1) * @PageSize + 1 and @PageIndex*@PageSize
END