I need to excute one insert query basend on two different if conditins. If one of them conditions is true then excute block of code.
For Example,
if exists( select * from tablename where docid = @docid and adv_feed <> 'sent' ) or
if not exists (select * from usaa_audit_fields_log where docid = @docid)
begin
insert statement
end
I have tried using OR statement between them but it doesn't work.
I've a resultset that returns some 55 rows which is typically a dynamic query like [Select column_name from table_name where column = condition].
I need to execute this query which is in resultset and insert the value of column_name into another table.
I dont get the way as how to make it. Kindly suggest me as how can I execute it.
Is there any possibility to execute the job in sql server. I want to create the Job. then through the quer i want to execute this Job by passing parameters. can we able to do this.Actucally i want to execute the SP from front end. but suddenly it should respond to the page. but that SP will run for nearly 5 minutes.
View 1 Replies I have a requirement in my app to find out if a certain row exists in a table and then if it does get some fields from another row
I have two parameters an EventId and a UserId.
This is the normal statement I would use to get that row
[Code]....
Then I would check if the result > 0. If it is greater than 0 this is the statement I would use to get the other details
[Code]....
So how can I join this into one statement? This is what I have tried
[Code]....
I am getting frustrated with this problem, I dont know what i did, but now I cannot execute any stored procedured when I could last time.When I use my asp.net application to run the query, it finds the stored procedure but when I execute it is sql management studio it says it cannot find the stored procedure even though it is there.I tried to execute other procedures and the samething happens. Even when I try a simple query it says it cannot find the tableI could execute the query if i placed Use [databasename] in front, but even with this, I cannot execute stored procedures.
View 12 RepliesI have a sql datasource with the ControlParameter called ddlDropDownList.
2 questions:
1. Is my syntax below ok, I am getting a runttime error that the syntax is incorrect.
2. I have the select statement set up the control parameter to get the selected value from the dropdownlist as shown below, is that syntax correct? especially the "selectedItem.value" for the propertyname property.
[Code]....
[Code]....
I am looking through a sql stored procedure which I might need to update in the near future. Basically the stored procedure is about 20 lines long. The stored procedure first builds a query
and stores it in a variable named "@Sql". And then for the last two lines of the stored procedure it appears that the big sql statement stored in "@Sql" is executed by using the "EXEC" command. See below. What is confusing though is that the query appears to be exectuted twice? Why was the query written in this way. Don't both lines do the same thing? Why is it being done twice? Could this possibly be a mistake on the
part of the person who wrote the query. Below are the two lines I am talking about?
EXEC sp_executesql @sql
EXEC (@sql)
I need to run the HttpContext.Current.Server.Execute method in my ASP.NET application. This application has a WCF operation that does some processing. Currently, I am to do my processing correctly from within my WCF operation. However, I would like to do this asynchronously.
In an error to attempt this asynchronously, I tried running Server.Execute in the DoWork event handler of a BackgroundWorker. Unfortunately, this throws an error that says
"object reference not set to an instance of an object" The HttpContext element is not null. I checked that. It is some property nested in the HttpContext object that appears to be null. However, I have not been able to identify why this won't work. It happens as soon as I move the processing to the BackgroundWorker thread.
My question is, how can I asynchronously execute the Server.Execute method?
I have five(5) asp.net textbox
example: textbox1,textbox2,textbox3,textbox4,textbox5
if (textbox1) has contain some value i need to execute some query and like this i need to check if textbox2 is contain some value and textbox1 is contain some value then i need to execute query based on textbox2... now we left query which has on textbox 1 coz now textbox 2 has value and like this i need to check if textbox3 is contain some value and textbox2 is contain some value and textbox1 is contain some value then i need to execute query based on textbox3...now we left query which has on textbox 1 and 2 coz now textbox 3 has value.
i need to check if textbox4 is contain some value and textbox3 is contain some value and textbox2 is contain some value and textbox1 is contain some value then i need to execute query based on textbox4...now we left query which has on textbox 1 and 2 and 3 coz now textbox 4 has value.
i need to check if textbox5 is contain some value and textbox4 is contain some value and textbox3 is contain some value and textbox2 is contain some value and textbox1 is contain some value then i need to execute query based on textbox5...now we left query which has on textbox 1 and 2 and 3 and 4 coz now textbox 5 has value. so let me know how to achieve this.
I'm building a web app for my company that will run a query every few seconds against SQL Server, and the data that it returns is which database is restoring and how much % complete it is. I have the query already set up and it works fine.
What I want to do is on my Web Form, have a "div" element that will contain the % complete of a database restore, and have it update every few seconds using the JavaScript timer object:
setInterval(function, interval)
I figure I would need to use XMLHttpRequest to send the request to the web server which will run the SQL query. Am I on the right track? How would I even start to do this?
My SQL query is below:
Use master
Select der.session_id, der.command, der.status, der.percent_complete, *
From sys.dm_exec_requests as der
Where percent_complete > 0
I have table for past four years. It had a records for around 10 Lacks it was taking lot of time to execute so i removed recordes from the table. Table size was reduced to 29 thousand. Still when i execute a query from my application it takes more than 2 minutes to return.
View 4 RepliesI am trying to loop throug multiple sql server instances (connections) and execute one query for all those connections and ouput in one grid.I am using checkboxes to show all of my connections. So far i have the following code: ( but the code only just executes the query on the first selected instead of the 2 or more selected connections.
Sub executesqlquery()
Dim instance As String
Dim instance1 As String [code]....
I am having a meltdown over something that seems so simple and yet isn't working. Here's my scenario.
I have an object structure of tEvents, which contains properties of an event like a run of concerts. tEvents in turn contains an entity set of tEventOptions, which include properties like EventDate, Cancelled etc. I would like to query a list of tEvents using properties of the tEventOptions, for example filtering by date.
My pageis using a calendar object to show event dates. So I am trying to find if any tEvents in the List coming back from the database match the date of the day element being rendered in my Calendar control like so (in this snip 'data' is List and results from a db query):
[code]....
Except r, my query result var, is always true no matter what data it receives. I have tried the sub query using other properties of tEventOption and get the same 'true' result each time. I know that the data does not reflect this result so I clearly have a problem with the structure of my query, but for the life of me I cannot find a way to resolve it.
I want to do execute a LINQ query, and I have the name of the table to query stored in a variable:
string tableName = "SomeTable";
DataContext db = new DataContext();
var vResult = from t in db.tableName where t.Id = ....
an ASP.NET web page I have an EntityDataSource:
<asp:EntityDataSource ID="EntityDataSourceOrders" runat="server"
ConnectionString="name=EntitiesContext"
DefaultContainerName="EntitiesContext"
[code]...
There is a table contains thousands of records. when I run this query:
[Code]....
The application stucks...it takes too much time to execute this query...
What might be the reason for that?
i made one window base application in VS2008 (VB.net). i made one simple code where i can insert data.and after inserting i can see that data on grid.when i am inserting data insert query runs perfect.after that for debugging purpose i fire select query and get result in dataset and its show data too.but when go
into database my inserted data not showing there.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim con_str As String = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database1.mdf;Integrated Security=True;User Instance=True"
Dim con As SqlConnection = New SqlConnection(con_str)
Dim cmd, cmd2 As SqlCommand
Dim adp As New SqlDataAdapter.....
I have SQL Details View insert statement, I need to have a Condition checked for the Insert Query. The condition is, I do have a table by name table1 with the No of Questions (for Eg: 10). The insert statement shud insert data to the table2 (Another table) only if the no of rows is less than or equal to 10 else it shud give me a message (It has exceeded the no of questions).
View 3 Replies[Code]....
[Code]....
creating Linq query in return statement
My application includes BUILDING table with columns BUILDING_ID, NAME, TOWN_ID, I run the LINQ query listed below and need to append two letters to buildings.NAME based on TOWN_ID. I assume that I need to place an "if" or "select" statement inside the query but I can not figure out how to do that,
[Code]....
basically i have two dropdown boxes to filter data and textbox with stored procedure bound to gridview.i want to be able to query data depending on the selected value passed,either using one or more parameter values.
i would like seperate sqlcommands to chose from depending on which controls i select to pass parameters.
i have included a parameter Select(control id) as this is declared by the wizard for stored procedure.
but i am not sure how it is defined on the page and passed to procedure.
[Code]....
I am having difficulty selecting data from 2 tables that do no share a primary key value. For instance, I have an actual table, a forecast table, and a GLText table. I may have an actual value but not a forecast value but I need them to appear in the same Query (like the query results shown below). I can get all values to appear in each table but have been unsuccessful in getting all values from both tables.
View 5 Replieshow to get the sql statement query or table name if oledbexception occurs - table or view does not exists.
get the DB details from the oledb exception.
i have a form view that takes fields from two tables 'Contract' and 'volunteers', however because i used a query builder,i have to input an insert statement. How do i create an insert statement for two tables in one query?
View 4 Replieshave a very important issue,i have three Stored Procedures Sp1,Sp2 and Sp3 .the first one (Sp1) will execute the second one (Sp2) and save returned data into @tempTB1 and the Second one will execute the third one (Sp3) and save data into @tempTB2.if I execute the Sp2 it will works and it will returned me all my data from the Sp3 ,but the problem is in the Sp1, when i execute it it will display this Error:INSERT EXEC statement cannot be nested I tried to change the place of execute Sp2 and it display me another error:Cannot use the ROLLBACK statement within an INSERT-EXEC statement.
View 4 Replies