Saving Data In Table In SQL Server 2005?

Dec 5, 2010

I am asp.net developer and I work with SQL Server 2005 .

I have a table with 4 columns

say
Name
RollNo
Std
Div

if client enters

Name
RollNo
Std

but doesn't enters 4.Div column data and try's to save data, it should not give error, it should save the data in database

View 3 Replies


Similar Messages:

SQL Server :: How To Insert One Table Data Into Another 2 Tables In Sql Server 2005

Feb 27, 2011

As I know, we can use INSERT INTO (....) SELECT FROM command to select data from one table and can insert into another table.

Now I need instead of 1 table, I want to select data from one table and Insert into another 2 tables.

Shall I write another INSERT INTO (..) SELECT FROM command or is there any other way?

View 7 Replies

DataSource Controls :: Saving And Retrieving Images From Sql Server 2005

Jan 5, 2010

I am facing a problem with retrieving an image and showing it on asp.net grid. I migrated MS Access database to sql server. Image are visible in Crystal report when fetched from the same database (migrated sql server database). But same images are not visible in ASP.Net grid view or simple asp.net image control. Following is my code

SqlConnection oConn =
new
SqlConnection(ConfigurationManager.ConnectionStrings["csr"].ToString());
oConn.Open();
SqlCommand oraCmd = oConn.CreateCommand();
oraCmd.CommandText = "select top 1 photo from [test] where photo is not null";
SqlDataReader dr =
null;
dr = oraCmd .ExecuteReader ();
if(dr.Read ())
if (dr["photo"] !=
null)
{
Response.ContentType = "image/gif";
Response.BinaryWrite((byte[])dr["photo"]);
}

This function is getting called from another page . "hlopen" is hyper link in the grid. hlopen.NavigateUrl = "GetPhoto.aspx?id=1";

View 1 Replies

DataSource Controls :: SQL Server 2005 + 4.0 + Html Saving Special Characters

Sep 24, 2010

how do I go about inserting into a database special characters such as the uppercase O, umlaut Ö Please understand that I have been able to insert the special character from inside MMS by putting an N in front of the value but when I run the SQL file from inside an ASP.net 4.0 page it comes up as a diamond with a question mark in it

View 12 Replies

SQL Server :: To Pass A Table Type Variable To A Table-Valued UDF In SQL Server 2005?

Nov 25, 2010

I need to pass a table type parameter to a user-defined table valued function in SQL Server 2005.How would I do this?

My function name is udf_t_GetSales ( @financialYearMonthsData as table)

The table @financialYearMonthsData has 3 columns ( MonthId int, DisplayText nvarchar(500), CalendarYear int)

View 7 Replies

DataSource Controls :: Import A Table From Sql Server 2000 To Another Server Qsl Server 2005?

Feb 9, 2010

I have to programmatically import a table from a database "A" in Sql Server 2000 to a database "B" in another server 2005.

View 1 Replies

ADO.NET :: Using Enterprise Manager Data Access Code Block And Have A Table In Sql Server 2005 With A Column Type Of 'bigint'?

Aug 4, 2010

Im using enterprise Manager data access code block and have a table in sql server 2005 with a column type of 'bigint'

when querying against this table and adding in a parameter, there isnt a long datatype available, so is Int32 an equivalent ?

[Code].....

View 1 Replies

Saving Foreign Text To A SQL Server Database Table With A Nvarchar Field

Apr 2, 2010

I have a requirement to have a multiline textbox that accepts any text from any language and stores this into the database for later use. I am using Linq with ASP .NET 3.5 with a SQL Server 2005 database.

View 2 Replies

SQL Server :: Working With More Than Two Temp Table In Sql Server 2005

Dec 4, 2010

I have such sql query, in which there are 8 to 9 temp table generated and from each temp table, I am fetching data with use of read table.

I want to store temp table output into gridview, but after using sqlcommand,I am able to display first temp table output into gridview, but after executing query first temp table destroyed and second sql query which is using first temp table, is not getting reference. as first temp table is not available.

e.g. #temp1 -> I am able to display out put in grid view & destroyed

#temp2 -> which is using #temp1, but not getting reference of #temp1.

so what should i do in this case?

View 1 Replies

ADO.NET :: Sqlbulkcopy Not Working For Default Value Of Table In Sql Server 2005?

Oct 22, 2010

i am facing problem in sqlbulkcopy function.

in database i have one ID column in where i am generating unique id through db function.

now for insert query its working properly but when i am using Sqlbulkcopy the default value fuction not executing.

View 3 Replies

MVC :: Saving Data To A Table With Foreign Key?

Jan 27, 2011

I have a app that records some jobs and those jobs can have notes attached therefore i connected the table with a foreign key, my notes to a Job.

in the details view of the job i allow the user to view the jobs by sending the id and fulling all the notes that match the id in the index view for the notes table. in the list of notes i have a action link to create a new note, here i sent also the id of the job to the create action of the control and try to insert that intot he note JobId to make the reference. I get this error and the note is not created. the note creats from code but not via the note controller creat action.

i get this - An error occurred while updating the entries. See the inner exception for details. below is the create action in the note controller

public ActionResult Create(int id)

{
// var newnote = db.Jobs.Include("StatusNotes").Single(j => j.JobId == id);[code]...

View 4 Replies

DataSource Controls :: BulkCopy From Excel To Sql Server 2005 Table?

Jul 1, 2010

I have an ASPNET application written in VB.NET which resides on the company's intranet. I am trying to do a bulkcopy from an excel file which is located in a secure folder on the web server to an existing table in Sql Server. The problem is that the folder requires a user name and password which is not the current logged in user or the ASPNET user. My question is how do I logon to the folder so that I can access the Excel file.

View 2 Replies

Security :: What Is LoweredRoleName Meant In Aspnet_users Table (SQL Server 2005)

Aug 31, 2010

For my existing data, both RoleName and LoweredRoleName are same, but some are lower case and some are in same case too.

View 3 Replies

Jquery - Saving Data From Html Table In Mvc?

Dec 10, 2010

I have a view as

<div class="main_content">
<div class="form_container">
<h1>
Save Build Document Revision</h1>

[Code]....

When save is click i need to save values in the table to database. How can this be achieved?

View 1 Replies

Web Forms :: Saving Data From Two Or Three Textboxes Into One Column Of Table In Sql?

Jan 29, 2011

i want to save data from three textboxes into one cloumn of database. i have there text boxes for phone no field..one for country code, 2nd for area code and third for number..

View 3 Replies

Web Forms :: Saving Data From A Dynamicly Created Table?

Jan 26, 2010

I first create a Dynamic table with textboxes and other controls in the cells. A user then enter data into the controls and I try to save the entered data to an access database. but when A save button is pushed the controls are not found.

I have a basic one cell asp:table on the page called "Table1" and then I append this table by using the Controls.Add(TableBuilder()) function in the Page_Init().

How the code basically works:

Public Function TableBuilder() As Table
dim r = New System.Web.UI.WebControls.TableRow()
Dim c = New System.Web.UI.WebControls.TableCell()
a = New TextBox
a.ID = "Sunday"
c.Controls.Add(a)
r.Cells.Add(c)
Table1.Rows.Add(r)
TableBuilder = Table1


The table shows up fine but after I press the save button I look for the created control to get the value the user entered it says the control is not there.

SaveButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim txtSunday As TextBox = Master.FindControl("MainContent").FindControl(("Sunday"))
UserEnteredData = txtSunday.text

But if I call TableBuilder() at the start of the function the control is found but the value the user entered is gone.

SaveButton_Click()
TableBuilder()
Dim txtSunday As TextBox = Master.FindControl("MainContent").FindControl(("Sunday"))
UserEnteredData = txtSunday.text

View 4 Replies

How To Move Stored Procedure From SQL Server 2000 To 2005, Multiple Table Insert

Jul 21, 2010

moving some tables & stored procedures from SQL Server 2000, to SQL Server 2005.So far so good, but I've come across a problem with this stored procedure:

CREATE PROCEDURE [dbo].[user_insert]
@user_service_unit int,
@user_champion_1 varchar(50),
@user_champion_1_nt varchar(10),
@user_champion_2 varchar(50),
@user_champion_2_nt varchar(10),
@user_champion_3 varchar(50),
@user_champion_3_nt varchar(10),
@user_date_received datetime,
@user_requestor varchar(255),
@user_info_requested text,
@user_expiry_date datetime,
@user_10_days datetime,
@user_5_days datetime,
@user_2_days datetime
[code]...

View 3 Replies

Security :: Saving Membership Data To A Sql Database Table (edit)

Jan 9, 2011

I want to create a site where users can create a very basic profile, with fields like full name, City, Age and Gender, and I want the data for every new member that signs up to go into a simple Table in my sql data base. reason being I want members to be able to view other members info in a table. I am familiar with the "CreateUserWizard", but that only allows me to work with certain predefined info (email, user id, etc). If I just anually add new columns to the table in which user ID and such is saved to, and customize the CreateUserWizard controller to have text boxes for the additional data that I want (i.e. city), will the CreateUserWizard know to save that additional data in the table?

Also, I know I can add fields to the <profile> tag in the web.config files, but I dont know where that gets stored. I want all the info for the user to be stored in one table in a sql data base so that I can easily access it with a quary. I dont see where the profile properties get stored, and how it can be linked to a User ID. by the way I noticed in other posts, there was a mention of a membership provider. I noticed that although I've added some "Login" controlls (i.e. login and CreateUserWizard), no membership provider has been added to my web.config file. Do I need to do this manually? or is there a menu item that adds it for me?

View 3 Replies

C# - How To Hold A Table Of Data For User Edition (before Saving In The The Database) ?

Jan 18, 2011

I've been using this programming style, that I've seen in an example and just started using it, because it does the job... I would like to know other programmers' opinion about it...

So the situation is when you have a GridView, or a control based on it like the RadGrid, and you want to keep track of a data table while you are adding, editing, reordering and deleting rows.

Using the session to hold the data table (or list of data) may not be the best solution, because the user may open two identical web pages... Using the ViewState to hold the data may be and option... I have been using an approach like the following:

[code]....

So using a static List variable, of a custom object (class), declared in the code-behind of the Aspx page, and updating it whenever the data is edited.

View 4 Replies

SQL Server :: How To Attach SQL Server 2008 R2 Express Database (compatibility 2005)to SQL Server 2005

Mar 10, 2011

I used SQL SERVER 2008 R2 express as my web development database and I set its compatibility level to 2005. Unfortunately this database cannot be be attached to SQL server 2005. Are there any other options?

View 3 Replies

VS 2005 Open PDF In Browser Without Saving The File??

Mar 25, 2010

I'm new to asp.net and C# really, mostly just done windows apps in VB.net.

Also, trying to move from Crystal Reports to SSRS.

I found some code to render a SSRS report as a pdf. But this is saving the pdf locally. I have code that opens the report after it's saved, in the browser.

Rather than save the "results" locally, how to I go about just opening file in the browser.
Code:
results = rsExec.Render(format, deviceInfo,
out extension, out encoding,
out mimeType, out warnings, out streamIDs);
[code]...

View 2 Replies

DataSource Controls :: Saving Images To SQL 2005?

Mar 25, 2010

I have a work request web page that now has a need for my users to add screenshots to.

View 2 Replies

DataSource Controls :: Sql Server 2005 Installation / Want To Go Back To Sql Server 2005?

Feb 3, 2010

i had the sql 2008 enterprise and i want to go back to sql server 2005 because in 2008 i created new database but when i did some changes in the table , it gave me an eror that i cant save thins and i need to creat new one if some one know what i'm talking aboutif not i need the sql server installation tutorial i tried by myself but probebly i did it wrong and now i cant connect well to the sql

View 2 Replies

Saving Ntext Data From SQL Server To File Directory?

Mar 15, 2010

A variety of files (pdf, images, etc.) are stored in a ntext field on a MS SQL Server. I am not sure what type is in this field, other than it shows question marks and undefined characters, I am assuming they are binary type.

The script is supposed to iterate through the rows and extract and save these files to a temp directory. "filename" and "contenttype" are given, and "data" is whatever is in the ntext field.

[code].....

This works, but the file should be saving to the server instead of popping up save-as dialog. I am not sure if there is a way to save the response to file.

View 1 Replies

Security :: Saving Sensitive Data To Sql Server Database?

Jul 14, 2010

Im passing sensitive details from my asp.net web app to a database on a different server. I've set up encryption on my database. Should I encrypt the data in the code behind file of the web app and then pass it to my database stored procedure or pass it to the stored procedure as it is and encrypt it there?

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved