i have a datagrid control which displays users created using sqlMembership..it has a row deleting event which is only accessed by administrators here is the code..
[Code]....
my problem here is to catch the securityexception and display in label
Modal PopUp Extender Catch exception error and display on modal popup
[Code]....
A developer has created a custom control in ASP.NET using VB.NET. The custom control uses a repeater. In certain scenarios, the rpt_ItemDataBound event is encountering a data error. My goal is rather than having the user see the yellow screen of death, give the user a friendlier error explaining exactly what the data error is. I figured I would be able to use a Try/Catch block as shown below throw the exception, however, it appears that the event has nowhere to be thrown to and stops executing at the "End Try" line.
Protected Sub rpt_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles rpt1.ItemDataBound, rpt2.ItemDataBound
Try
ProcessBadData...
Catch ex As Exception
Throw ex
End Try
End Sub
In VB.NET, I can find where the repeater's DataSource is being set, however, I can not find a DataBind event. how I can capture the exception in this ASCX control so I can report it to the user? Edit: The stack trace looks like this. There is another repeater within the repeater that is actually causing the error (rptOther) and I'm able to catch the error, but I can only throw it to the rpt_ItemDataBound. I can't figure out how rpt_ItemDataBound is getting called without a DataBind event.
at Company.WebForms.Control.rptOther_ItemDataBound(Object sender, RepeaterItemEventArgs e)
at System.Web.UI.WebControls.Repeater.OnItemDataBound(RepeaterItemEventArgs e)
at System.Web.UI.WebControls.Repeater.CreateItem(Int32 itemIndex, ListItemType itemType, Boolean dataBind, Object dataItem)
at System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource)
at System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e)
at System.Web.UI.WebControls.Repeater.DataBind()
at Company.WebForms.Control.rpt_ItemDataBound(Object sender, RepeaterItemEventArgs e)
I get this error in the browser:
Code:
Thread was being aborted.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Threading.ThreadAbortException: Thread was being aborted.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[ThreadAbortException: Thread was being aborted.]
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +486
System.Web.ApplicationStepManager.ResumeSteps(Exception error) +501
System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +123
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +379
Version Information: Microsoft .NET Framework Version:2.0.50727.3053; ASP.NET Version:2.0.50727.3053
I have try{}catch(Exception ex){} in the right place:
Code:
protected void Button1_Click(object sender, EventArgs e)
{
try
{
// all processing occurs inside here
}
catch(Exception ex)
{
}
}
I even created a global.asax file and on the Application_Error event, I wrote a code that would email me the error (and i'm not getting an email regarding that error when I get the error shown above). I know for a fact that the thread is going inside the "try" statement because I send emails to myself whenever it finishes certain codes inside of it. So how come I'm getting that error in my browser instead of it being handled in my "catch" statement? I have two problems here, one, why is the exception not going to my "catch" statement, and two, why am I getting that error in the first place.
Note: my web app calls a webservice.
Here is the code copied from [URL] In asp.net code behind, I use try-catch try to catch any error but never catch it. In SQL database, if I rename Employees to Employeesx or change column DepartmentID to DepartmentIDx, record will not be deleted (it is right) without any error (it is wrong, suppose catch an error).
CREATE PROCEDURE DeleteDepartment
(
@DepartmentID int
)
AS
BEGIN TRANSACTION
DELETE FROM Employees
WHERE DepartmentID = @DepartmentID
IF @@ERROR <> 0
BEGIN
ROLLBACK
RAISERROR ('Error', 16, 1)
RETURN
END
DELETE FROM Departments
WHERE DepartmentID = @DepartmentID
IF @@ERROR <> 0
BEGIN
ROLLBACK
RAISERROR ('Error', 16, 1)
RETURN
END
OMMIT
I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------
And even i tried in Global.asax page in Application_Error() method like below
Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();
And in my Error.aspx.cs page i have placed a label and i have written code like this
protected void Page_Load(object sender, EventArgs e) {
Label1.Text=Request["errmsg"];
}
But it is not getting redirected my error page and not displaying anything on it.
iam inserting record in three tables in a database, iam using begin trans , commit transaction and rollback,
i want to use throw method, if any value insert wrong, pls correct me, i want to throw the error and
its go to rollback
running = false;
int updaterec = DBmgr.ExecuteNonQuery(CommandType.Text, "update ASArrivedcontainer set billgen ='Y' where billgen ='y' and acontinerid in ("+SelValues+")");
if (updaterec > 0)
{
running = true;
DataSet BillContainerDetails = BillingDetails();
byte[] ContainerDetails = GenerateBill(DBmgr, sContainerIds, rcno,isGeneralRCNo, FetchContainerDetails, ModifyId,ref BillContainerDetails);
DBmgr.CreateParameters(6);
//string otherchargesId = obj.retriveSingleRecord("select top(1) ModifyId from ASOtherCharges");
DBmgr.AddParameters(0, "@InvoiceNo", "1","IN");
DBmgr.AddParameters(1, "@BillDate", DateTime.Now.ToString("yyyy/MM/dd hh:mm:ss tt"), "IN");
DBmgr.AddParameters(2, "@CustomerId", "1", "IN");
DBmgr.AddParameters(3, "@TotalAmount", "10000", "IN");
DBmgr.AddParameters(4, "@OtherChargesId", ModifyId, "IN");
DBmgr.AddParameters(5, "@ContainerDetails", ContainerDetails, "IN");
String BillNo = DBmgr.ExecuteScalar (CommandType.Text, "Insert into BillMaster(InvoiveNo,BillDate,CustomerId,TotalAmount,OtherChargesId,ContainerDetails) values (@InvoiceNo,@BillDate,@CustomerId,@TotalAmount,@OtherChargesId,@ContainerDetails)
Select @@Identity ").ToString();
if (!String.IsNullOrEmpty(BillNo))
{
running = true;
DBmgr.CreateParameters(4);
for (int i = 0; i < BillContainerDetails.Tables[0].Rows.Count; i++)
{
BillContainerDetails.Tables[0].Rows[i]["BillNo"] = BillNo;
DBmgr.AddParameters(0, "@Billno", BillContainerDetails.Tables[0].Rows[i].ItemArray[1].ToString(), "IN");
DBmgr.AddParameters(1, "@rcno", BillContainerDetails.Tables[0].Rows[i].ItemArray[2].ToString(), "IN");
DBmgr.AddParameters(2, "@acontinerid", BillContainerDetails.Tables[0].Rows[i].ItemArray[3].ToString(), "IN");
DBmgr.AddParameters(3, "@bflag", BillContainerDetails.Tables[0].Rows[i].ItemArray[4].ToString(), "IN");
//string value = BillContainerDetails.Tables[0].Rows[i].ItemArray[0].ToString(); ;
// string strsql = "insert into billcontinerdetail(billno,rcno,acontinerid,bflag) values(@billno,@rcno,@acontinerid,@bflag)";
String count = DBmgr.ExecuteScalar(CommandType.Text, "insert into billcontinerdetail(billno,rcno,acontinerid,bflag) values(@billno,@rcno,@acontinerid,@bflag)Select @@Identity").ToString();
if (count > 1)
{
running = true;
}
else
{
}
//running = true ;
//break;
}
DBmgr.CreateParameters(6);
for (int j = 0; j < BillContainerDetails.Tables[1].Rows.Count; j++)
{
DBmgr.AddParameters(0, "@billcontkey", BillContainerDetails.Tables[1].Rows[j].ItemArray[1].ToString(), "IN");
DBmgr.AddParameters(1, "@ratetypcode", BillContainerDetails.Tables[1].Rows[j].ItemArray[2].ToString(), "IN");
DBmgr.AddParameters(2, "@days", BillContainerDetails.Tables[1].Rows[j].ItemArray[3].ToString(), "IN");
DBmgr.AddParameters(3, "@amount", BillContainerDetails.Tables[1].Rows[j].ItemArray[4].ToString(), "IN");
DBmgr.AddParameters(4, "@level", BillContainerDetails.Tables[1].Rows[j].ItemArray[5].ToString(), "IN");
DBmgr.AddParameters(5, "@sflag", BillContainerDetails.Tables[1].Rows[j].ItemArray[6].ToString(), "IN");
// string strsql = "insert into billratedetail(billcontkey,ratetypcode,days,amount,level,sflag)values(@billcontkey,@ratetypcode,@days,@amount,@level,@sflag)";
String count = DBmgr.ExecuteScalar(CommandType.Text, "insert into billratedetail(billcontkey,ratetypcode,days,amount,level,sflag)values(@billcontkey,@ratetypcode,@days,@amount,@level,@sflag)Select @@identity ").ToString()
;
i am almost finished up with a website and i have used this try catch block only in few places. now what i want is that i want to catch all the exception so that i can report the same through mail.. is it possible in any way to catch all the exception in one place and mail it cause now writing this block everywhere will be a kind of tedious process?
View 4 RepliesWhat i would like to do is catch any exception that hasn't been handled in the web application then send the user to a screen saying something like
"Were sorry this has crashed"
And at the same time send the exception to our ticketing systems.
I am assuming I need to put it in the the global.cs somewhere just not sure where?
I have tried this on two different controller methods now, and both times, even if the linq2sql doesn't allow the data to be saved, the code never jumps into the catch block.
I've watched the noun object in the middle of the trace, and the isvalid property is false, but the modelstate isvalid is true. Either way, the code never jumps into the catch block.I'm pulling my hair out about this. I feel like it will be something really silly.
The code all works similar to nerd dinner.
NounRepository nounRepository = new NounRepository();
Noun noun = new Noun();
try[code]...
I'd rather not have to add code in this manner though, as it seems like an unnecessary duplication.
In Asp.net (c#),i'm not able to catch exception(FileNotFoundException) properly... i don't know the reason..Actually File s not there..But catch statement fails to catch the exception..here is the code..
try
{
System.Drawing.Image imgg1 = System.Drawing.Image.FromFile(Server.MapPath("").ToString() + "\images\img1.jpg");
} [code]...
no Massagebox not working in the web
at catch I want appear windows and retuen to....
try
{
}
catch (Exception ex) {Console.WriteLine("Error reading from", ex); }
I have ObjectDataSource and GridView on one of the pages of my asp.net web project.
To initialize ObjectDataSource i use Init event:
protected void ObjectDataSource1_Init(object sender, EventArgs e)
{
ObjectDataSource1.EnablePaging = true;
ObjectDataSource1.TypeName = "CustomerDataSource";
ObjectDataSource1.DataObjectTypeName = "Customer";
ObjectDataSource1.SelectMethod = "GetCustomers";
ObjectDataSource1.UpdateMethod = "Update";
ObjectDataSource1.SelectCountMethod = "GetCustomersCount";
ObjectDataSource1.MaximumRowsParameterName = "maximumRows";
ObjectDataSource1.StartRowIndexParameterName = "startRowIndex";
}
Somewhere in DAL:
public static List<Customer> GetCustomers(int maximumRows, int startRowIndex)
{
try {
... some select to database here...
}
catch (Exception ex)
{
Utils.LogError(ex);
throw ex;
}
}
Now let's imagine that GetCustomers for some reason throws an exception. How could i catch this exception and handle it? I know i can use Application_Error, but i would like to catch this exception somehow on my page and show some friendly message to the user.
I am trying to implement the Ajax HtmlEditor into my application. I currently am using a regular TextBox to load and save some data to some EMail template files and had to do some work-arounds to get it to accept the HTML Input. I am trying to upgrade it to use the Editor, but as soon as I insert the Editor and do a PostBack, I receive the Security Exception below. There is absolutely no change to the code-behind, so I don't understand the issue. There is so little on Google for the Version 3.5 Editor that I'm stumped. I have Debugging enabled, but it won't give me the Soruce Error either.
Security Exception Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file. Exception Details: System.Security.SecurityException: Request failed. Source Error:
[Code]....
:: REMOVED FOR SIMPLICITY :: Stack Trace:
[Code]....
I need to create a small web application. The first thing I need to do is to develop the login, logout and user session management functionality. I wanted to use a masterpage and a usercontrol for this purpose. When a user open the page and IS LOGGED IN, the usercontrol should something like this:
"Hello Username! <a>Logout</a>"
And if he is NOT LOGGED IN, the Usercontrol should show something like this
"Login | Logout"
When he clicks on the Login Button the Login-page should be opened. How can I build a Usercontrol which does the above thing. (I have never build a usercontrol and used it in a masterpage before!) The second problem is a little bit komplexer: What happens if the user idles some times and after that time (for example 30minutes) comes back to his pc and wants to execute an action in the web application. Normally he should get an session timeout asp.net exception. I don't want that the user sees this asp.net errorpage, I want to redirect him to the Login Page and he should relogin and gets an error message shown something like "You were timed out. Please login again".
my web application i use FindControl to retrieve a Control By Name (it returns an System.Web.UI object). The control can be of various type and I don't want to treat them differently: I'd like to set the Text property to a defined string. I hope there's a class that I may use to cast the control and set the Text property.
View 8 RepliesWhat is the purpose of adding a try catch condition that simply throws the Exception?
Sample Code (Note: The db object is proprietary code that simply uses ADO.Net):
[Code]....
Does [HandleError] attribute in MVC replaces the traditional try catch exception handling?
As I have seen codes in controllers where the top line of code is [HandleError] also I have not seen much of try catch in the code of the application I am working on.
while doing debugging i found a blue dotted corner around catch block, while hovering it is showing system.exception...what does it mean and what to do
View 1 RepliesI'm using a static Timer in my Global.asax to run a method at regular intervals. When the method throws an exception, my application is stopped. I have used an empty catch to prevent exceptions from stopping the application something like below code. Is there a disadvantage to use such an approach?
[Code]....
I want handle exceptions in update panel control with c#.
View 1 Repliesregarding one issue I am facing. I created a httpmodule for hadling the unhandled errors and I need to log those errors using log 4 net in database.Everting working fine but I am not getting any error information once the error was hadled and I need that info too. I want to make it as a centralize module which can trap all errors and log those errors.How call application_error event of httpmodule from catch block...so that I can log that info there and I no need log in every catch block..
View 1 RepliesI see a message on:
winform control hosted in IE, FileIO security exception.
I have got the same problem, which I cannot figure out what is the solution for weeks.
I have Windows 7 (Home premium edition), framework 3.5 (how can I check that, if gacutil is correct version, if it metters, anyway ...)
I am writting on C#.
Also on assemblyInfo.cs :
[code]....
Im using Visual Studio 2010. I'm new to asp.net. I'm trying to do a simple user login page but whenever I try to launch the Web Administration tool, I keep getting some exception error. The below images is the error I encountered.
View 4 RepliesBasically what I am trying to do is have my webpage project folder located directly on my local machine (ex. Local #1). Our database is located on a server (ex. Server #1) . I am building my web applications on my local machine and then trying to debug them in Visual Studio 2008. Only every single time I click to debug my project I get a "Security Exception" error that looks something like the following...
"Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
Exception Details: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
I'm somewhat leaning towards the fact that I need to connect to the database to pull information from it and I don't have the proper permissions is the reason why this is happening but I've also read that it can be something that deals with improper configuration of my Web.Config file (i.e. I do not have something enabled).
Note #1: A co-worker of mine is having the same problem if he tries to put the project locally and then debug it. He has full administrative access to the DB and everything else.