Security :: Unable To Get Membership Working Using Sqlprovider?
Jan 7, 2011
I have now been trying for many days to get Membership on my website working but cannot. My aspnet db is a web sqlserver 2008 db.
My issues are
1). The MembersPages are still accessible by unauthenicated users in the deployed site. Using the local development server hyperlinking to a MemberPage does infact re-direct the user to the login page and the return url shown is the correct MemberPage selected. But on the deployed site clicking the hyperlink simply takes the un-authenticated user straight to the MemberPage.
2). On both sites, deployed and local, on clicking a login status control, the user is taken to the login page and is correctly authenticated, but the login page return url is always the default page and that is where the authenticated user is returned to even though the destination url in the login control states a MemberPage within the MembersPages directory.
3). In trying to overcome these issues, I have on several occasions deleted the login control and re-introduced it. Although the login control shows while debugging and when the site is deployed, on the login page in the IDA, there is instead an error message stating "Error Creating Control - Login1. Duplicate Component name 'Login1'. Component names must be unique and case sensitive. I'm not sure how to get rid off the duplication.
[Code]....
View 4 Replies
Similar Messages:
Mar 28, 2011
I am simply create a form that accept some user details and insert some details into membership table and rest of other table.
Membership.CreateUser(username,password,email)
Roles.AddUserToRole(username,"user");
this will insert the details into the aspnet_users table and user is not assigned to any role and no membership record insert. Please give me some ideas how to do this.
View 5 Replies
Feb 26, 2010
I tried creating a login page as ASP.NET web application. Then as we have to configure the page to connect to the database to retrieve user details, i clicked on the ASP.NET configuration under Website control.. I was taken to the configuration page with three tabs.. Security was the tab that i was supposed to configure.. But i am not able to go through to the security tab. I get the following error message.
"There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store.
The following message may help in diagnosing the problem: Unable to connect to SQL Server database."
View 15 Replies
Oct 11, 2010
I am working on a new application that will feed off my application's DB that was written with .net 3.5 (really 2.0, since thats where the aspnet_regsql.exe lives)... I open up the application settings page on my old VS2008 application, and see all my 4000+ users, but if i link the membership to that database in VS2010 with asp .net 4.0, it shows 0. I have verified the connections, and i also noticed there is a net aspnet_regsql.exe in the 4.0 framework folder.
Is there any way to make the old membership work, or a way to migrate my users? If not, i would think this would cause a LOT of issues with many .net applications with many forms based users.
View 3 Replies
Sep 30, 2010
I have a web app that uses the Membership Provider to authenticate users.Everything worked fine until today... when I tryed to log in it failed. I looked in the database if something went wrong there and the user is deleted but everything looks fine there.I tryed to recover the password using the user name and i got an error that the user is not recognized.I tyed to recover the password (even though I am sure what the password is) but still no luck... (I get an error that hased passwords can not be decrypted)I triyed it in local host and guess what ... still the same... this is the provider section in my web config
[Code]....
View 6 Replies
Feb 25, 2011
I have this code for changing a user's password when they click the password reset button (with extra code to log to ELMAH so I can try to figure out what is going wrong).
This is in ASP.NET MVC 2, using the standard aspnet membership provider, with a simple View like this:
New Password: ______
Confirm Password: ______
[Reset] [Cancel]
The route to this view is `/Account/Reset/guid`, where guid is the user's id in the aspnet membership database.
The key portion of the code is where it calls `user.ChangePassword()`. You can see that it logs a message when successful. The problem is that for some users, the success message is logged, but they can not log in with the new password. For other users it logs the success message and they can log in.
if (user.ChangePassword(pwd, confirmPassword))
{
ErrorSignal.FromCurrentContext().Raise(
new Exception("ResetPassword - changed successfully!"));
return Json(new {
Msg = "You have reset your password successfully." },
JsonRequestBehavior.AllowGet);
}
The full code listing is:
[Code]....
Edit: Adding a bounty to try to get this solved. This is one of the most annoying problems on my issue list, and I have no idea how to proceed.
View 1 Replies
Jun 28, 2010
I'm using membership that created by asp.net configuration when you create users with roles when you create a user for your website using asp.net configuration in Visual Studio
After uploading my project and creating the Database, I can't login using the users that i have created, i'm 100% sure im using the right username and password but still can't login but they are working 100% in my local DB
after few search in google i found the solution is to execute the following command:
[Code]....
View 3 Replies
May 3, 2010
I have implemented the .Net Membership provider with my website which is, for the most part, working well. However, occasionally a user will try and login and nothing will happen. There will be no error, they will just hit "Submit" from the login screen and continue to the homepage as an unauthenticated user. This behavior persists until they clear their web cache, or restart their machine... which makes me think it's some kind of cookie expiration error?
Does anyone have any ideas on how to troubleshoot this?
Here is the relevant section of my webconfig:
<membership defaultProvider="AspNetSqlMembershipProvider">
<providers>
<clear/>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ASPWebAuthConnectionString" maxInvalidPasswordAttempts="10000000" enablePasswordRetrieval="false" enablePasswordReset="true" applicationName="nvpumps"
requiresUniqueEmail="false" minRequiredNonalphanumericCharacters="0" minRequiredPasswordLength="5" requiresQuestionAndAnswer="false"/>
</providers>
</membership>
View 3 Replies
May 21, 2010
i have been creating a website on my computer which has VWD 2008 and SQL Server 2008, i have membership and role system set up, (using the aspnet_regsql) and that worked perfectly fine on my compuetr.
Now when i was ready to deploy it on my web server, i simply copied the whole database, and added it onto the SQL Server on my server, so it has exactly the same rows, tables, data, etc etc.
Now, when i run the website via the domain, users are able to login etc, and my authentication code that redirects users if they are not logged in also works, so im sure it cant be a problem with the membership provider, as it all seems to work.
But all the users that were already in the set roles, it still shows them in the role in aspnet_roles table, but its not working, the thing i have in the roles loginview does not display, and even after running the web administrator tool, it shows that the user is in that role, but does not work (even while viewing on the local machine)
So i added code in a page_load event that would auto add that user to the role
System.Web.Security.Roles.AddUserToRole(HttpContext.Current.User.Identity.Name, "TestRole");
and on entering the domain (on the local server) i got error:
The role '' was not found.
And on local host server
I get error:
The user 'TestUser' is already in role 'TestRole'.
But yet, even on the localhost i still cant see any indications that the user is in a role, as none of my rle login views are showing.
The role '' was not found.
View 5 Replies
Aug 9, 2010
In my web.config I have:
[Code]....
If I just have ADProvider1 it works, when I add ADProvider2, even though for testing I only use ADProvider1 I get an error: "Unable to establish secure connection with the server" Am I adding the second provider to the membership section incorrectly?
View 11 Replies
Jul 6, 2010
How do I access the default SqlProvider in a DAL? I've only ever done this before from webforms.
View 1 Replies
Feb 23, 2010
I have edited the sqlprovider file in DotnetNuke as below. But it is giving an error like in my screenshot.
ALTER PROCEDURE [{objectQualifier}ICG_Auth_SaveSettings]
(
@PortalId INT[code]......
View 1 Replies
Sep 9, 2010
I'm working on a website where it should be possible for registered users to upload word documents. The administration of users is done through Membership and Profiles. When the documents have been uploaded, the following needs to be achieved:Non-registered users should not be allowed to download documents I should be able to control which users that has access to which documents I should be able to register which user downloads which documents I should be able to track how many times a document has been downloaded
Can this be achieved be using Membership and Profiles?
View 1 Replies
Apr 12, 2010
I've done this before but can't remember how for the life of me. I used aspnetreg_sql.exe to create the membership tables in my database. But now i cant seem to be able to point my web app to the correct database. In the provider settings in asp.net management interface i only see a radio button with the label "AspNetSqlProvider" but I can only test it (in which it always fails). I can't modify the connection.
View 3 Replies
Feb 28, 2011
I have a website which makes use of Custom Membership/Role Provider, Website used to work fine with my earlier server.
recently we changed our webserver which has IIS 6.0 on Windows server 2003, on this server my site doen't work, i have installed Framework 2.0 and Ajax Extension as well, but only html pages inside this project works but not aspx.
we also have other asp.net websites hosted on this server which runs without any problem but they don't make use of Membership/Role providers
to be precise i do not get any error message aspx jus goes blank, i tried all the options ASP.Net is allowed under Web Service Extensions.
View 1 Replies
Feb 28, 2011
I'm trying to use the Membership.CreateUser method without passing a security question and answer. I set them to string.empty, but no go. I have my provider set to not require a question in my web.config. What am I doing wrong?
[Code]....
View 2 Replies
Jan 5, 2011
This is my first membership provider; I converted the sample provider [URL] to SQL. I created a vb class provider and put it into the App_Code folder. After it was created I tried to modify my webconfig but the error pops up. I don't know what else to try, I don't know if I have missed something
webconfig:
[code]....
View 1 Replies
Jan 6, 2010
I made a project to use the access membership provider from http://imar.spaanjaars.com/QuickDocId.aspx?quickdoc=404 and it works. But I need to edit my database but when I configure my database, I cannot see the tabel, I can only see the queries in mdb file. when I select the field from query, I am unable to update it. My code is as follows and I hope it is clear. thanks a lot.
[Code]....
View 2 Replies
Feb 9, 2010
I have started to implement asp membership. I go the administration page and click provider. I have a database on a server on the local network that i want to install my members tables in. When i run the
aspnet_regsq.exe it doesn't ask me what SQL database i want to use and seems to default to my local SQL Server 2005 installation. How I change this to use my SQL Express database on a local server?
View 6 Replies
Aug 10, 2010
I have to implement a small webshop. Basically it's just a website with a huge backend ERP System and with the possibility to sell one (yap, really only one!) product on the website. The only requirement is a MySQL Server. The backend is almost finished (about 95%) and is secured with the .net MemberShip Provider for MySQL (the one in MySql.Web from the MySql Connector .NET).
Now to my question: I can set up the membership system easily but I do not need such things like username or password-question but I would need a reference to an address table to store the users home address. So, it is possible to change or customize the membership system to for eg. a unique customer id instead of the username column and set this in codebehind when the user is creating a new account? And is it possible to insert new users/customers from codebehind in an easy way? (I mean without checking each foreign key and inserting the customer reference to the userinrole table and so on...)
View 10 Replies
Apr 14, 2010
I am building a site and I want to use the default membership controls provided with asp.net like Login View Control etc. I don't want to use the ASP.Net Membership DB as I want to use my own Security structure and I don't want to inherit the ASP.Net membership class either. In my case how can I use these controls to aid me like how will a login view control detect if someone is authenticated or not.
View 7 Replies
Apr 26, 2010
I created a custom forms authentication and membership provider and it seems to work fine opening up in WAT, creating roles and adding users. Also when I in my mvc app use it to log users in, it works fine. However it seems to fail to determine a user's role (no errors, but just jump over User.IsInRole(...) lines and Roles.GetRolesForUser(); comes up empty. I got a gut feeling I did something wrong with my configuration, so for now I'll post just that:
[Code]....
View 6 Replies
Jan 24, 2011
This error is occuring randomly, and I can't seem to pinpoint what is causing it. For the most part, the code works fine. I'm confused why it works sometimes, but then suddently craps out on me, lol.It happens in the code when I call upon the asp.net membership provider. It only seems to happen when i use Membership.GetUser() to grab the logged in user's information.
View 9 Replies
Jul 7, 2010
I have encountered a very strange issue. Whenever I use the .NET membership provider to reset a password, it generates strange characters, which don't represent the password at all.An example of the password it generates is:
쥳⮚聙蟐֡ᑡ壈I#BAhy(ox32+y*
It does this on every password. Has anyone seen this before or know a fix?
View 1 Replies
Jan 21, 2010
I've set up a system with forms based authentication and using the asp:Login control. When I put in an invalid password I get the approriate invalid password message. However when I put in a valid password, it does nothing...just returns to the login page again. I'm triple checked the login info. There is no error message, and the invalid attempts counter doesn't increment. When I put a break point in the Login_LoggedIn event of the Login form, it hits it, but User.Identity.IsAuthenticated is false. I'm not 100% sure it should be true at this point, as I'm pretty new to .NET but it seems kind of odd.
My user database is stored in a sqlserver 2005 db that already existed. I've added a new connection for it.In the authorization I have
<authorization>deny
users="?"/><authorization>
View 2 Replies
