I am using CreateUserWizard control.. Is there anyway, I can put all the steps in the wizard process into one page. I do not like the idea of sifting through multiple pages to create a user. I would like one page where user goes through different sections (panels/divs) and creates a user ultimately all from one page.
View 6 RepliesI have a CreateUserWizard with three Wizard steps and one CreateUserWizardStep. The first two are accessible from the code behind by ID. The third and fourth are not! If I comment out the references to these two steps in the code behind the page runs fine. I have triple checked the variable names and everything is fine. Everything that should have a runat="server" does, everything is enabled, all of that good stuff.
why some steps in the same CreateUserWizard may not be visible from the code behind and others are?
I have an asp:wizard control that contains five WizardSteps. All of these steps have form controls, and most of these controls have validators. When the user steps through the wizard with the next and previous buttons everything is working great, and validation triggers as it should. However, if the user chooses to navigate the wizard using the links in the SideBar, he or she could skip some of the steps. When the last page is submitted (which is a summary page) there might be controls in the wizard that are invalid.
What I want to do is to check the state of all controls (or run all validators) when the user clicks the finish button, or when the user enters the summary page. I have made an attempt to run all the validators in the FinishButtonClick event by doing this:
[code]....
But when I do this every validator claims that they are valid. I have also tried to set all controls to Visible = true; prior to this code block, but this has no effect. what could be wrong? Or is it a better way of doing this, maybe a native function to the wizard control that I'm missing?
I am trying to add wizard steps dynamically in code-behind but keep getting an exception
"ActiveViewIndex is being set to '0'. It must be smaller than the current number of View controls '0'. For dynamically added views, make sure they are added before or in Page_PreInit event."
I found I have some fundamental error in my building, since I got this error after trying to build the simplest wizard in a new web-site just opened...
[code]....
I have a wizard with 6 steps
step1: patient information (just display)
step2: test1
step3:test2
step4:test3
step5:test4
step6:Finish
there are four variables which have boolean data (key1,key2,key3,key4)
now, How do I skip or remove or hide the steps 2,3,4,5 based on key1,key2.key3,key4 respectively?
I like to use a wizardcontrol on my site. I like to use a radiobuttonlist on each step.
I would like that once an item of a radiobuttonlist is selected, a check mark becomes visable next to the active step title on the sidebar.
For this I have changed the sidebar to a templated sidebar, added a picture of a checkmark next to the sidebarbutton, and put it's visebility to false.
now I have to write some code to set the visebilety of the specific checkmark to true.
I have tryed this:
[Code]....
But then the control is not found. I guess becouse findcontrol is only looking in the active wizard step, and not in the sidebar.
I am in the process of evaluting ASP.NET Wizard Control. Where we need to collect data from different steps, Validate data and towords the end i should be able to show summary of data.
I would like to know from group if any one of used this control and what issues they faced. Are there any limitation around this control?
I was wondering, in MVC normally we can include validation in the model. Plus, we can add our own custom error in the control using the ModelState.AddModelError.However, it is okay to call ModelState.AddModelError after we called ModelState.IsValid ?
In others words, if i wanna :
1- Check if cart is not empty.
2- Check if the shipping details are valid.
3- Doing the transaction by creditcard.
4- Check if its a success.
5- If its a success Submit the order.
Is this controller code okay, does it fellow conventions ?Is there a better way to do thoses steps ?
---
public ActionResult CheckOut(Cart cart, ShippingDetails shippingDetails,
CreditCard creditCard)[code]....
I am creating dynamic wizard steps in the Page_PreInit method , if i go ahead and refresh the form i get an error as follows :
Error : ActiveViewIndex is being set to '3'. It must be smaller than the current number of View controls '1'. For dynamically added views, make sure they are added before or in Page_PreInit event. Parameter name: value
this is my code to add the wizard control which exists in my Page_PreInit() method
[code]....
In one of the steps of a wizard control are 2 dropdownlist which data come from 2 distinct queries and cascade from the 1st one to the 2nd one. Where and how can code for that data binding and cascading be placed since it seems codebehind window for both of the dropdownlists cannot be found in VS property or event windows?
View 3 RepliesI'm looking for some opinions on how to go about the following:
Say I have a wizard control in my website, and I've completed all the steps on the wizard and I want to redirect to another page after the "Finish" button I've clicked. So, then after that I logout of my site, and go back into it bearing in mind the wizard has been completed, I want to redirect the user to another page and by-pass this wizard control. Would I setup a flag in the database, to indicate if the wizard control has been completely filled or not. If status = true then redirect the user to different page (and bypass wizard)... but if status = null then make sure user still can go through steps in the wizard control.
[Code]....
set a flag to state whether all of the wizard has been filled in or not / otherwise go back and complete the wizard?
I have a web page hosted on the server and a zip file on the server's file system. The page is spinning off the 7zip process with some arguments (location of the zip file and destination folder for unzipping) but it seems to raise permission issues, of course. For each file in the archive I get "Can not open file [filename]". I tried windows authentication and running the process with a username and password but nothing worked properly. What would be the best way for unzipping the file on the server from security point of view? Ideally, I would also like to have this event driven so the file is unzipped as soon as it arrives on the server (this is when I request the page).
View 1 RepliesI was wondering if anyone has come across what seems like a bug (though I'm fully updated and can't find reference to this anyway) in Visual Studio.
I've a CreateUserWizard and in some of the steps, it appears to be duplicating HTML inside of itself when I switch step views.
Step 2, for example says "please enter your first name", once I view step 2, or 3 etc, step 2 generates "please enter your first nameplease enter your first nameplease enter your first nameplease enter your first name".
This is inside the actual aspx file so is surely an issue with Visual Studio, but I can't work out how to solve it.
I've looked for broken tags or incorrect values that may be confusing it, but can find none.
As mentioned in subject line I'm not able to configure role based website in IIS7. Please find details below.
Environment Details:-
.Net Framework: 3.5
Server: Windows 2008
Webserver: IIS7
Database: SQL Server 2008
Authentication Type: Form Based
Roles/Membership Provider: User defnied.
Problem:-
After setuped my website in iis7 while trying to Login in web page even I entered correct password it says Incorrect password in Login control.After long googling I suspecty that we need to add "Provider to trusted provider" to Authorized provider. I have gone http://www.iis.net/ConfigReference/system.webServer/management/trustedProviders/add but didn't works for me.
Can you anyone please help me in this.
I am getting an error incase user submits incorect security question's answer. I gave text in 'QuestionFailureText'. But its not working.
Below is the error getting.
'
Security Exception Description:The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
Exception Details: System.Security.SecurityException: The source was not found, but some or all event logs could not be searched. Inaccessible logs: Security.
Source Error:
[Code]....
Source File: c:WindowsMicrosoft.NETFramework64v2.0.50727Temporary ASP.NET Filespng.webe16ed3ec284df543App_Web_rvfjstqa.5.cs Line: 0 Stack Trace:
[Code]....
if I hit the .aspx page on the browser and if the page takes time to load say may be 25-30 seconds then what are the steps to be taken to make sure that the page loads quickly. In other words what could be the reason for this slow loading.
View 3 Replies[Code]....
The above code is my register wizard code, user can register just fine.When the user finish registration, there is a "Continue" button on the complete step.Clicking it will do nothing, how do I redirect the user to specific URL when the user click it?
i have a "CreateUserWizard" in my page, the problem is i cant give a roll to that user, only a default role.
I tryed to it with a dropdown with roles and doing if's in the code behind but doesnt work, someone know how to do it?
ASPX:
[Code]....
C#:
[Code]....
I used the wizard and went through the steps to set it up and clicked DONE and closed the ASP.NET configuration window/wizard and the database was not created. What might be wrong here?
View 1 RepliesI'm trying to get the text values from each textbox in a custom created createuserwizard step however i keep returning null for each textbox however the default step & text boxes (ie. UserName, Password, Email, etc, etc) i can get the text value with no problem
[Code]....
i have use createuserwizard in the smart tag i click on customize create user step then i add dropdownlist for the location and i added i table aspnet_Users column for location then i go to procedure call it
[dbo].aspnet_Users_CreateUser i added the location column in the statement
like this[Code]....
but when i run my application i get error
with this message
The formal parameter "@location" was not declared as an OUTPUT parameter, but the actual parameter passed in requested output.Cannot insert the value NULL into column 'UserId', table 'C:DOCUMENTS AND SETTINGSAFCWEBSITE45APP_DATAASPNETDB.MDF.dbo.aspnet_Membership'; column does not allow nulls. INSERT fails.
The statement has been terminated.
I'm trying to add a step into a Create User Wizard to set roles, but it don't works, it create the user but don't set the role,
[Code]....
using System;
I am using the standard createuser wizard (but got same issue with other wizard) and in the CreatedUser event an exception is raised causing the wizard not to reach the next step. If no exception are raised the wizard behave as expected. I have tried to force the wizard to move to the next step using CreateNewMember.MoveTo(this.CompleteWizardStep1); as an exemple but still the web page is in waiting stage for about 5 to 10 mins before it finally reach the final step. I have tried to deal with the exception in the routine it occured or throw it back to the CreatedUser event and deal with it there but nothing changes as of to the move to the next step in the wizard.
View 16 RepliesHow can I add an auto-generated password to the Password and ConfirmPassword textboxes in the Create User Wizard control. Rather than the user inserting them, they will be supplied automatically.
View 2 RepliesI'd like to add a payment step to the create user wizard so that it follows:Sign upPay (via paypal or something similar)omplete (only if payment successful)Has anyone done this before and could they point me in the right direction? I've had a scour of the internet and not had too much luck yet.It's for a charity site I'm working on if that makes a difference
View 4 Replies