I have a wizard with 6 steps
step1: patient information (just display)
step2: test1
step3:test2
step4:test3
step5:test4
step6:Finish
there are four variables which have boolean data (key1,key2,key3,key4)
now, How do I skip or remove or hide the steps 2,3,4,5 based on key1,key2.key3,key4 respectively?
I have a wizard with 3 steps:
1. login
2. user input form
3. summary and finish(submit)
As the user may already be logged in, I used the following code to skip step 1 on page load:
[Code]....
I am trying to add wizard steps dynamically in code-behind but keep getting an exception
"ActiveViewIndex is being set to '0'. It must be smaller than the current number of View controls '0'. For dynamically added views, make sure they are added before or in Page_PreInit event."
I found I have some fundamental error in my building, since I got this error after trying to build the simplest wizard in a new web-site just opened...
[code]....
I like to use a wizardcontrol on my site. I like to use a radiobuttonlist on each step.
I would like that once an item of a radiobuttonlist is selected, a check mark becomes visable next to the active step title on the sidebar.
For this I have changed the sidebar to a templated sidebar, added a picture of a checkmark next to the sidebarbutton, and put it's visebility to false.
now I have to write some code to set the visebilety of the specific checkmark to true.
I have tryed this:
[Code]....
But then the control is not found. I guess becouse findcontrol is only looking in the active wizard step, and not in the sidebar.
I am creating dynamic wizard steps in the Page_PreInit method , if i go ahead and refresh the form i get an error as follows :
Error : ActiveViewIndex is being set to '3'. It must be smaller than the current number of View controls '1'. For dynamically added views, make sure they are added before or in Page_PreInit event. Parameter name: value
this is my code to add the wizard control which exists in my Page_PreInit() method
[code]....
In one of the steps of a wizard control are 2 dropdownlist which data come from 2 distinct queries and cascade from the 1st one to the 2nd one. Where and how can code for that data binding and cascading be placed since it seems codebehind window for both of the dropdownlists cannot be found in VS property or event windows?
View 3 RepliesI have an asp:wizard control that contains five WizardSteps. All of these steps have form controls, and most of these controls have validators. When the user steps through the wizard with the next and previous buttons everything is working great, and validation triggers as it should. However, if the user chooses to navigate the wizard using the links in the SideBar, he or she could skip some of the steps. When the last page is submitted (which is a summary page) there might be controls in the wizard that are invalid.
What I want to do is to check the state of all controls (or run all validators) when the user clicks the finish button, or when the user enters the summary page. I have made an attempt to run all the validators in the FinishButtonClick event by doing this:
[code]....
But when I do this every validator claims that they are valid. I have also tried to set all controls to Visible = true; prior to this code block, but this has no effect. what could be wrong? Or is it a better way of doing this, maybe a native function to the wizard control that I'm missing?
I have a CreateUserWizard with three Wizard steps and one CreateUserWizardStep. The first two are accessible from the code behind by ID. The third and fourth are not! If I comment out the references to these two steps in the code behind the page runs fine. I have triple checked the variable names and everything is fine. Everything that should have a runat="server" does, everything is enabled, all of that good stuff.
why some steps in the same CreateUserWizard may not be visible from the code behind and others are?
I am using CreateUserWizard control.. Is there anyway, I can put all the steps in the wizard process into one page. I do not like the idea of sifting through multiple pages to create a user. I would like one page where user goes through different sections (panels/divs) and creates a user ultimately all from one page.
View 6 RepliesI am in the process of evaluting ASP.NET Wizard Control. Where we need to collect data from different steps, Validate data and towords the end i should be able to show summary of data.
I would like to know from group if any one of used this control and what issues they faced. Are there any limitation around this control?
I'm looking for some opinions on how to go about the following:
Say I have a wizard control in my website, and I've completed all the steps on the wizard and I want to redirect to another page after the "Finish" button I've clicked. So, then after that I logout of my site, and go back into it bearing in mind the wizard has been completed, I want to redirect the user to another page and by-pass this wizard control. Would I setup a flag in the database, to indicate if the wizard control has been completely filled or not. If status = true then redirect the user to different page (and bypass wizard)... but if status = null then make sure user still can go through steps in the wizard control.
[Code]....
set a flag to state whether all of the wizard has been filled in or not / otherwise go back and complete the wizard?
I have a query regarding asp.net validators. I want to conditionally skip asp.net validators and allow/disallow form submission based on a checkbox for skipping validations. I tried a few things but I am facing some problems. Please see the code snippets below to get an idea of the requirement.
View 3 RepliesI'm having a problem with a formview i've created. The formview itself uses a costum template to perform updates to the database. Its a form to edit Car details. One of the details is the brand. I use a dropdownlist control to let them select the name of a brand thats in our database, this passes an ID to BLL's update so the car gets updated with a brandID. My update query works perfectly when i try it directly on the database, however, when i use the formview it updates everything except the brand.
When I debug and watch the NewValues object he passes, it does contain the new value for the brandID.
btw, brand is 'merk' in dutch, so brandID is called 'MerkID', and the brandname is called 'Naam'
PL:
[Code]....
BLL:
[Code]....
[Code]....
Update query used in DAL(-->VoertuigAlgemeenTableAdapter.UpdateVoertuigAlgemeen)
[Code]....
Long ago, I created an ASPNET user for development use.However, every time I boot up my dev system, I'm presented with a user login for ASPNET, among others.I don't want to remove ASPNET; I need it for dev work.But how do I keep it from appearing among the list of User Logins available at boot-up?
View 4 RepliesMy ASP.NET application is using an assembly without strong name. When I run it in IE, it shows an error saying: Could not load file or assemlby 'xxxxx.' or one of its dependencies. Strong name signatuer could not be verified. The assembly may have been tampered with, or it was delay signed but not fully signed with the correct private key. (Exception from HRESULT: 0x80131045)"I use sn.exe -Vr xxxx to register that assembly to skip the strong name verification, but still it shows that error. What could be causing this problem, and what can I do next to fix it?
View 1 RepliesI have a problem with Visual Studio Debugging. I use some Skin for my Web Application, e when I debug it, the debug controls stops on the skin. I press F10 multiple times, but I've never reached the end of the skin file in this way. It's a problem for me, since some times I don't know where the control goes after the skin. And pressing F5, I lose the control on the debug flow. Does someone know how to avoid the Skin debug (o better, the debug of certain file extensions) in Visual Studio 2008?
View 1 RepliesI am trying to use wizard in an update panel but the wizard is disappearing when I click for the next or prev step button. I only want to close wizard , when I click the finish button. How can I do this ?
View 1 RepliesAs I'm learning the ins and outs of ASP.NET user management, I've learned that the default in VS is for it to use a SQL Server Express .mdf file for the data it needs to save. This won't help me for when I deploy my site, as I'm running SQL Server 2008 R2 on my IIS 7.5 server. I know that I can run a command line tool to automatically create the db tables necessary for user management, and will do that on my development machine, but how do I tell my existing, in development code in VS to ignore the existing Express .mdf file and look at the newly created db tables?
View 1 RepliesTo complete an order, I need to code the following steps one by one.
1) update order table, tOrder
2) update customer order history table, tCustomer
3) update shipment table, tShip
4) send an confirfation email
The problem is sometime due to unknown reason, after step 2), program can not finish step 3) and 4).
Since tOrder and tCustomer table was updated, how to back to their data before update?
I have a requirement to build a form that has multiple steps (there are 12 steps in total). Based on a querystring (eg. t=1), only certain steps need to be in the form. For example, if t=1, only steps 1, 2, 3 and 12 are required so I need to be able to skip
steps 4 through 11.
I'm using a Wizard control for this so far but I'm running into issues with the page lifecycle and moving to the next wizardstep and am wondering how people suggest I could better do the above. The crux of what I'm doing is:
- determine form type based on querystring use a Select statement, then create an array of step ID's applicable to the form type
[Code]....
- when a user clicks next, the method OnActiveStepChanged is fired and the next step based on the array value needs to be shown (this is where I'm having issues)
[Code]....
This all seems to be working however when the user clicks next from the starting step in the wizard, the next step is blank (ie. no step is rendered).
What I've done may not be the easiest way to acheive what I'm trying to so I'm hoping somebody has a "why dont you just do this?" type suggestion :)
if I hit the .aspx page on the browser and if the page takes time to load say may be 25-30 seconds then what are the steps to be taken to make sure that the page loads quickly. In other words what could be the reason for this slow loading.
View 3 Repliesall the steps for applying payment gateway in my Application
View 3 Repliescan anyone tell me What are the steps to be taken while deploying asp.net application
View 1 RepliesI know its a common question. But I want to share something. Actually I am working on e-commerce portal. It consists of 32000 products with around 2500 categories. I used 3-tier architechture for this project.Everyting is coming using stored procedures. I used master pages as well.But still I am fighting with the performance issue. Can anyone pls tell me some usefull steps to increase the speed of the website.Its taking ages to load the pages. please look at the site
View 2 RepliesI am not sure how to write soap exception. What are the steps to write soapException.
Somebody can explian?
<WebMethod(MessageName:="get_output_information")> _
Public Function get_output_information (ByVal tran_id As Object) As DataSet
Try
'do some code here
'do some code here
Return ds1
Catch ex As Exception
Throw New ArgumentException("An Error occurred while processing output information.")
End Try
End Function