I am in the process of evaluting ASP.NET Wizard Control. Where we need to collect data from different steps, Validate data and towords the end i should be able to show summary of data.
I would like to know from group if any one of used this control and what issues they faced. Are there any limitation around this control?
I like to use a wizardcontrol on my site. I like to use a radiobuttonlist on each step.
I would like that once an item of a radiobuttonlist is selected, a check mark becomes visable next to the active step title on the sidebar.
For this I have changed the sidebar to a templated sidebar, added a picture of a checkmark next to the sidebarbutton, and put it's visebility to false.
now I have to write some code to set the visebilety of the specific checkmark to true.
I have tryed this:
[Code]....
But then the control is not found. I guess becouse findcontrol is only looking in the active wizard step, and not in the sidebar.
In one of the steps of a wizard control are 2 dropdownlist which data come from 2 distinct queries and cascade from the 1st one to the 2nd one. Where and how can code for that data binding and cascading be placed since it seems codebehind window for both of the dropdownlists cannot be found in VS property or event windows?
View 3 RepliesI'm looking for some opinions on how to go about the following:
Say I have a wizard control in my website, and I've completed all the steps on the wizard and I want to redirect to another page after the "Finish" button I've clicked. So, then after that I logout of my site, and go back into it bearing in mind the wizard has been completed, I want to redirect the user to another page and by-pass this wizard control. Would I setup a flag in the database, to indicate if the wizard control has been completely filled or not. If status = true then redirect the user to different page (and bypass wizard)... but if status = null then make sure user still can go through steps in the wizard control.
[Code]....
set a flag to state whether all of the wizard has been filled in or not / otherwise go back and complete the wizard?
I am trying to collect extra information about a user when the user account is created using the Create User Wizard. This info will be stored in a new table in the standard ASP membership SQL database.I have read several books and loads of online tutorials on the subject and they all take different approaches and seem to make the process hard work.Is there any reason why I can't add an SQL datasource and a number of textboxes to the wizard step, 'connect' the values from the textboxes to the Insert Parameters and then put an Insert Statement in a suitable event handler to cause the insert?
View 9 RepliesI have an asp:wizard control that contains five WizardSteps. All of these steps have form controls, and most of these controls have validators. When the user steps through the wizard with the next and previous buttons everything is working great, and validation triggers as it should. However, if the user chooses to navigate the wizard using the links in the SideBar, he or she could skip some of the steps. When the last page is submitted (which is a summary page) there might be controls in the wizard that are invalid.
What I want to do is to check the state of all controls (or run all validators) when the user clicks the finish button, or when the user enters the summary page. I have made an attempt to run all the validators in the FinishButtonClick event by doing this:
[code]....
But when I do this every validator claims that they are valid. I have also tried to set all controls to Visible = true; prior to this code block, but this has no effect. what could be wrong? Or is it a better way of doing this, maybe a native function to the wizard control that I'm missing?
I have a CreateUserWizard with three Wizard steps and one CreateUserWizardStep. The first two are accessible from the code behind by ID. The third and fourth are not! If I comment out the references to these two steps in the code behind the page runs fine. I have triple checked the variable names and everything is fine. Everything that should have a runat="server" does, everything is enabled, all of that good stuff.
why some steps in the same CreateUserWizard may not be visible from the code behind and others are?
I am trying to add wizard steps dynamically in code-behind but keep getting an exception
"ActiveViewIndex is being set to '0'. It must be smaller than the current number of View controls '0'. For dynamically added views, make sure they are added before or in Page_PreInit event."
I found I have some fundamental error in my building, since I got this error after trying to build the simplest wizard in a new web-site just opened...
[code]....
I am using CreateUserWizard control.. Is there anyway, I can put all the steps in the wizard process into one page. I do not like the idea of sifting through multiple pages to create a user. I would like one page where user goes through different sections (panels/divs) and creates a user ultimately all from one page.
View 6 RepliesI have a wizard with 6 steps
step1: patient information (just display)
step2: test1
step3:test2
step4:test3
step5:test4
step6:Finish
there are four variables which have boolean data (key1,key2,key3,key4)
now, How do I skip or remove or hide the steps 2,3,4,5 based on key1,key2.key3,key4 respectively?
I am creating dynamic wizard steps in the Page_PreInit method , if i go ahead and refresh the form i get an error as follows :
Error : ActiveViewIndex is being set to '3'. It must be smaller than the current number of View controls '1'. For dynamically added views, make sure they are added before or in Page_PreInit event. Parameter name: value
this is my code to add the wizard control which exists in my Page_PreInit() method
[code]....
I just got URL Routing working on my web site but to do so I had to set runAllManagedModulesForAllRequests to true. Looking around real quick I did not see a triger just for an URL Routing Module for .Net 4 (just a complicated way to do it for 3.5SP1). What is the downside to leaving runAllManagedModulesForAllRequests (my server only has 2GB of ram and runs IIS 7 and SQL 2008 web so not much resorcess as is)? Also is there a module just for URL Routing that I can enable for all requests instead?
View 3 RepliesI am databinding a dropdown list in a wizard step (as long as not the first step). In the Page_Load event, I put the databinding in if (!IsPostBack) block - There is no binding happening, I guess because the system treat the next button click on the previous wizard step triggering a postback.
View 5 RepliesI am building a web based insurance application with VS 2008. Using the web wizard to enter newly created policy data and related information.My question is how to handles relational data in the wizard and saving that back to the database.A general idea of the setupEach policy can have multiple policy periodsEach policy period can have multiple sections and multiple policy feesSO The new wizard allows for a single policy entry, then we move to enter the policy periods. Which can be one or many per new policy, then we move to the sections and fees which can be ne or many per policy period.Each part is a step on the wizard. Policy, Period, Sections, Fees.The multiple entries are handled with an aspxgridview.NO problem in entering the data and completing the wizard, except when it comes to actually saving the data.Saving the policy and policy period information is easy because I can get the policyID value and assign that to each policy period.Problem comes in when I save the period child info. Because I can have multiple periods, I can't determine which child data (Sections and Fees) belong to which period so as to get the period ID.What process would you suggest, and how can I achieve this.I have thought of only allowing period entry per new policy. This will certainly solve the problem in a way, but does not conform to business rules.
View 1 RepliesPossible Duplicate:
Are there any disadvantages to always using nvarchar(MAX)?
Is there a general downside by chosing 'ntext' as column type instead of a type that contains chars but with a limited max size like 'char' or 'varchar'?
I'm not sure whether a limited column size is applyable to all my colums. Therefore I would use 'ntext' for all columns containing text. Might this lead to problems in the future?
(I'm using Linq-To-SQL in a ASP.net Webforms application)
i have to collect data from a website which is in table format, i have to put the table row into specific row and colum in excel, can anyone tell me how do i do it
for example
[URL]
it has rating so how can i put those rating into any kind of database or excel?
i want to pass the url and it should scan and filter it.
I was wondering what you guys thinks is the most efficient way to select data from a msSQL database.. I tend to use a sqldatareader, but is this really the best way? - It is particularly impractical if one also must take into account, that the table may be "Null"?:
[Code]....
[Code]....
I would like to have a stream: Say from google: [URL]
I want to be able to give the Seach Parameter: In this instance C# or any other search parameter and then have the results shown in my page.
I am faced with a situation where I have to collect info from google and create an msword doc with it. I want to be able to automate the data collection and hopefully the word doc creation from the strings.
i have create 2 drop down list..and i set value for first DropDownList1..it's working good..
now i trying to add a method to collect all (list) data from DropDownList1 and split into words and display into DropDownList2..
when i add method to Default.aspx.cs page it nt working...
here's my code(no errors):
Default.aspx
<body>
<form id="form1" runat="server">
<div>
<asp:DropDownList ID="DropDownList1" runat="server"
[Code]....
I'm trying to validate that a GridView logated in one of the steps of the Wizard Control is populated by the user before the Next button is clicked. What I mean is that I need to block Next (or Prev) button until the user populates a gridview, once the gridview has at least one element then enable the (Next/Prev) buttons. How can I enable/disable Next/Prev buttons within a specific step?.
View 1 RepliesI'm trying to collect the checked boxes values in a data list. Need to collect the checked value (ie "1") and the data key value (cdID) together in an array to then insert into DB. Here's the Datalist:
[Code]....
Here's my attempt(which isn't working too well):
[Code]....
In "ads" table where those info into controllers below will be stored, the table has "AdsID" column which generate automatic number of each row. So what i am looking for is after inserting the info form controllers inside table , get the AdsID number of row which just created when the button clicked and pass the row number "AdsID" and "AdsTit" through EditAds.aspx. so the link suppose to be such as:
EditAds.aspx?AdTit= here AdsTit &AdNum= here AdsID
protected void adNewQdadsbtn_Click(object sender, EventArgs e)
{
SqlConnection cn = new SqlConnection(sc);
if (RegInteFileUploadImg1.HasFile || RegInteFileUploadImg2.HasFile || RegInteFileUploadImg3.HasFile || RegInteFileUploadImg4.HasFile || RegInteFileUploadImg5.HasFile)
[code]....
I'm using Wizard control to collect some information. I have Repeater control in my Wizard control. when client inputs information and clicks next button he gets to next WizardStep, thou from next step when client clicks previous button and navigates to previous step Repeater control's input fields are empty. How can I store client input so when he will navigate back he could see previously added information. I don't want to use any client or server side session management techniques, because I think viewstate is enough. I think my problem is I don't bind Repeater control in a right place, besides, all the controls inside my Repeater control are loading dynamically.
View 6 Replieswhen i am trying to use a repeater to display data in a wizard control, everything seems worked as expected before i change the value of wizard's DisplaySideBar, here is my demo code:Test.aspx:
[Code]....
Test.aspx.cs:
[Code]....
guys who intrest on this you can copy this code and test it on your pc, when we click the link button in repeater's item will do nothing at the first time but it will work when we click it again.i have debug this and found that when the page is not in post back, the linkbutton's id will be "MainWizard_rpMain_ctl01 _lbEdit" in prerender method but after render it will change to "MainWizard_rpMain_ctl04 _lbEdit", but when page have been post back, the clientid will be correct as "MainWizard_rpMain_ctl01_lbEdit" and then event can be fired correctly.i thought this is a bug of .net framework, when i set the value of wizard's DisplaySideBar, it will ask to re-create controls but repeater haven't clean the item's count and then recreate item will use wrong item index, i hope this message can be post to .net framework team and they can find out what's the matter on it.
I have a form built using the wizard control in VS 2008. I need this form to collect data and publish them to a sharepoint list or page?is this possible?
View 1 Replies