I have a website for which I would like to have clean friendly URL. I am passing query string values in it. I am confused whether to use URL rewriting or URL routing. I have tried doing URL rewriting using URLrewriter.net but couldn't get through. Can any one help me out in deciding what to use and how to go about doing it.
View 5 RepliesI am having session null on url routing , I searched the net all solutions are mostly for asp.net 3.5 , am using 4.0.... i dont have modules tag in web.config , i've got httpmodules which doesnt have that property.
View 3 RepliesI'm currently using URL Rewriting, but I recently stumbled upon this link on Rerouting, and it looks like it's quite simple yet powerful, and easier to implement than URL Rewriting, a "downside" probably is that configurations are not sitting on a web.config file but rather on the code itself, but I was wondering about the differences, and advantages of using one over the other. Having read some resources about routing, I can see the differences, and now I reformulate my question:
Is it worth it to move from URL Rewriting to Routing?
Are there any IIS-specific configurations that should be made?
Is it recommended to use it on a ASP.NET WebForms Application, or is it oriented to other kind of projects?
I am implementing URL rewriting and this is not a MVC app, I am using .Net 3.5 Framework here is my simple setup: 1. My Link Page I have a link on my index.aspx page
(notice SEO friendly URL, purpose of Routing) --> <asp:HyperLink ID="HyperLink1" NavigateUrl="~/Category/Engine" runat="server">Engine</asp:HyperLink>
2. Global.asax:
protected void Application_Start(object sender, EventArgs e)
{
RegisterRoutes();
}
private static void RegisterRoutes()
{
System.Web.Routing.RouteTable.Routes.Add("category", new System.Web.Routing.Route("Category/{name}", new CategoryRouteHandler("~/catalog.aspx")));.........
Is URL Routing is replacement for URL rewriting.? Or each of them have their own pros on cons?
View 7 RepliesI have my categories in database, and want something url rewriting/routing to make my url nicer and more SEO friendly. I have divided my categories into the following:
Cars > Select car > Car model >
how do I create url rewriting / routing in my categories? I use framework 4.0
I need to implement Routing or Url-Rewriting in my application. So, is there any utility like logging utility Elmah. I dont want to write much code, I need to configure and start playing.
View 2 RepliesI've been reading many articles and can't seem to get my ASP.NET 4 web forms project to do Routing/URL rewriting.
I have added the following reference to the ASP.NET project:
System.Web.Routing
It then added the following line to the web.config file:
<compilation debug="false" targetFramework="4.0"><assemblies><add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</assemblies></compilation>
In the global.asax file I want to add the routes, but it is not recognising RouteTable and RouteCollection keywords.
How do I get these to be recognised so that I can create the rules in the global.asax file?
In my website users can create thier own websites by making folder of thier choice like: [URL] Where the folders Pankaj and Adam are storing in database. I just want that when user after creting thier website just clicked or type the address of thier website as [URL] then if the folder with name Pankaj exists in database then the page will open otherwise it gives the http 404 page not found error. And while the address [URL] is opens then i donot want to physically create it on server. My requirement is that i want to open it by the concept of url rewriting/ Routing. Which one concept will be good for this. And can anyone provide some code with example that how can i achieve this easily.
View 2 Replieswhen we go for client and server side state management in asp.net
View 2 RepliesI am doing a POC of making my website run faster. Currently it stores huge object data in Session while passing information from one page to another. What I was thinking is to use shared methods and properties instead of session. It works, but wanted tocheck if this is an optimum way to do it. Below is the code that does not use session but still pass object data from one page to another:
[code]...
i have a form on page1.aspx with several controls (textbox, dropdownlist, etc).on Page1 PageLoad event i load data from database and performe databinding.From Page1 a user can, by clicking a specific button, move to Page2.aspx to insert some details and, after saving details, he returns to page1.
if save changes are made on control on page1 before save them to db, obviously, these are lost on return from page2 (because are reloaded on pageload from db).How can i save control status between pages round trip?
i need to know the full concepts state manegemnt in asp.net,..in which site i will get the correct concept for state management....
View 4 RepliesUser Interface: 2 Labels; 1 Buttons
Requirements: Create a Web Page in ASPx that will do the following:
1)One label will provide a count of how many times Button 1 has been clicked in the current session.
2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.
aspx.vb
Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
Let me explain, describing the scenario:In a custom server control (in my case, derived from CompositeControl), in the overidden CreateChildControls method I create a complex tree of subcontrols, using information from a db.The db provides both information on which controls I need to create (the user interface's structure) and the data used to fill these controls.Than the user can interact with the control and change the data (that becomes different to what stored on db).
My custom control lives in the same page where there are other controls, obviously.And these controls can cause a postback at any time.What I need is that my custom control keeps the data entered by the user across these postback, without reverting to the original data and loose the user data entry.
Here is the first doubt:
1)I create the subcontrols dinamically in the CreateChildControls at any page refresh (both on first call than on postback).I know that the framework solves the reference between the posted data and the controls I create in the CreateChildControls in order to set properties and raise control events, but can you tell me when and how it actually does this? In which phase of page life cycle? What happens after the CreateChildControls?
A second doubt:2)If the user interface structure must change as a consequence of the data entered, I had to execute CreateChildControls twice (the first time to recreate the original interface to get the events and the second time to create the new interface)
In which phase of page/control lifecycle do I have to make the second call to CreateChildControls? I do it on Prerender now, but is it right or wrong, and why?
I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
I am having a ASP.net application it having three pages ,page 1,page 2,page 3,when the user navigating between this pages I want to maintain the view state in page level after postbacks(i.e.) .If a user visits page 3, passing some query loads some data .then he moves to page 1 doing some entries .after that he once again moves to page 3 now I want to display the data previously available at the time he moves to page 1, same
way I want to do to my three pages up to the user logging out.
Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?
View 2 RepliesI'm using the following line of code to display the number of users currently logged on:
lblNoOfUsers.Text = Membership.GetNumberOfUsersOnline().ToString()
I'm still debugging my application so it's on the local server. As I debug and stop then debug again, eventually lblNoOfUsers.text turns to "0" instead of "1", even as I'm navigating my application. It only turns to "1" again if I log out and sign back in. It's almost as though Membership.GetNumberOfUsersOnline my login are referencing two different session states. How is this possible? Does asp.net create a new session state cookie each time I start debugging?
I am trying to set a session variable in the global.asax file and keep running into the problem that the Session is null.
I am running my application in VS2008 and using asp.net 3.51.
Here is my code:
1. In my web.config file I have enabled the session state and added the following line;
<sessionState
cookieless="false"
mode="InProc"
timeout="60"
></sessionState>
2. In the Session_Start procedure in the Global.asax file I set the session variable to a default value.
[Code]....
My problem seems to be that when the Application_Error procedure is executed the session state is lost.
Does anyone know why the session state isn't available in the Global.asax file.
All we have a global ships position tracking website which runs smoothly until IIS application pool recycles.When there is workerprocess recycling looks like session state expires as a result i loose all session data and when customer clicks refresh button he is redirected to login page.
In web.config Session state mode is set to InProc so i changed it to State Server but to my luck i have MAP object which is not serialiazable which is causing the maps from not appearing on the website.I tried adding serializable attribute to the object class but still not succesfull.Our website is accessed by our customers whose count is more than 1000.
Changing the session state mode from InProc to StateServer can really slow down the response time so
Is it good to go further fix the serailizable issues and move to state server?.
Is there any way I can retain my session data when application pool recyles?..
Stopping Application pool from recycling may not be a good idea considering health factor of web server.
i have one method which save datatable in viewstate.i am calling this method in. page_load2. Prerenderthe page was every heavy,i did tracing of page i found due to calling of method from preprnder it doubled the viewstate sizewhat was the reseon behind this.
View 2 RepliesI am getting this error while executing my Asp.Net application.i am not able to execute application using Visual Studio Interface and when i am trying to execute application from Local IIS. its executing well but when i am trying to click any button for searching etc it is giving this error. The state information is invalid for this page and might be corrupted. The detailed information is
[Code]....
[FormatException: Invalid character in a Base-64 string.] System.Convert.FromBase64String(String s) +0 System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +72 System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +4 System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37 System.Web.UI.HiddenFieldPageStatePersister.Load() +113[ViewStateException: Invalid viewstate. Client IP: 127.0.0.1Port: 1307User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5ViewState: 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...][HttpException (0x80004005): The state information is invalid for this page and might be corrupted.] System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +106 System.Web.UI.ViewStateException.ThrowViewStateError(Exception inner, String persistedState) +14 System.Web.UI.HiddenFieldPageStatePersister.Load() +217 System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +105 System.Web.UI.Page.LoadAllState() +43 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6785 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +242 System.Web.UI.Page.ProcessRequest() +80 System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +21 System.Web.UI.Page.ProcessRequest(HttpContext context) +49 ASP.pages__cmtickets_cmtickets_reports_cmtickets_search_aspx.ProcessRequest(HttpContext context) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesapp_mobily_alexmare1eddc658e6f2ba5App_Web_b9acfmsy.14.cs:0 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +181 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
I have a clear button and a textbox in an aspx page. I set the session variable in this page as
String str = Textbox1.Text;
Session["TypeIds"] = str;
and I clear the sessions in a clear button event as
Session["TypeIds"]=null;.
Then when the user types some value in the textbox ,on Response.Redirect on another aspx page, the session variable returns null values.It does not retain its session state. The session state has to be maintained in the next page. Is it because this clear button event and setting explicitly to null creates this problem?