I want to don't let the page to go back ,for that i am using the code to expire the page after the first time it loads so that when second time the page will load it will not find the such page in cache ,but problem is that my code is not working propely when i am using page.Ispostback, iam inserting my code here[Code]....
View 1 Replies I'm trying to cache a complex page with lots of controls on it so that if the user navigates to it later it will look like it did when he last saw it.The page has controls which post back and other controls are populated depending on the selections.
I'm using [Code]....
after the <@ Page directive.
What happens is that a postback gets the cached page, so no processing and it looks the same regardless of user selections. So far so good. But if I browse to another page and return by a link, the cached version is ignored and the default page is created again. This is more or less the opposite to what i want.
I attempted to use the validation callback to ensure that a postback resulted in a new version, and that worked, but it still ignored the cached page if it wasn't a postback.I realise that it will need more work to ensure each user gets their version of the page from the cache, but why bother if this doesn't work.
I've a Linkbutton control in the master page. And in the content page(Home.aspx) i'm trying to navigate it an aspx page(Apply.aspx) passing a value using querystring. Everything is working fine when i click the apply linkbutton control for the first time i.e i'm able to get the value the querystring and able to use it.
But when i click on the same linkbutton second time, i'm not getting the querystring value?how to persist the querystring value on reloading?
I'm trying to set session variables in one page, and retrieve them in my code file in the page that it posts to.
I keep getting this error. I put the correct namespaces in, and enabledSessionState = true to my application files, but no luck.
Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration.
I'm just calling a session variable, and I get that error
e.g,
Public AUID As Integer = Convert.ToInt16(Session("AUID"))
I'm working in a web application that uses InProc sesssion to store data then we decided to decided to work with out of process session state. But now I tried to Implement that but it is not working
Note: I use visual studio web development server.
Here is what I did in the web.config fil:
<sessionState mode="StateServer" cookieName="ASP.NET_SessionId" stateConnectionString="tcpip=127.0.0.1:42424"
cookieless="UseCookies" timeout="10"/>
And to enable session state in all pages:
<pages theme="Blue" enableSessionState="true">
Then I started the aspnet_state service on my pc.
And I made a test to see if the session is working but unfortunately it is not working
I have 2 cols. StartTime and EndTime. If user's total time is greater then 30 mins then I am locking user. Here, I used Session and I want keep my session for 30 mins. I did almost everything (I think ?) . Change the setting from IIS, Wrote <sessionState timeout="30"> but it is not working... Till 28 - 29 mins it saves the time, but not above..... After that I changed the session's timeout for 9 hours ex: <sessionstate timeout="5400">..... But still not working.... I don't understant what to do?
View 2 RepliesI am trying to use "viewstate" inorder to 1.get the information i type in onepage and retrieve into another page.2.so i created 2 text boxes FirstName and Lastname and a submit button in first web page.3.i want to retrieve these names in the other page for which i am writing the code for button.But i dont know exactly how to use the viewstate....i tried with request.querystring and its working.So i want to use viewstate instead request.querystring.
View 9 RepliesI have created a matser page with a two radio buttons, text box and a button. Whenever user sets some values to these control and clicks the button, i will navigating him from one content page to another based on the data he has entered. The problem is after the content page load, the values selected/given in the controls(radio button, text box) are getting cleared.
Is there some way to maintain the values ?
i have a form on page1.aspx with several controls (textbox, dropdownlist, etc).on Page1 PageLoad event i load data from database and performe databinding.From Page1 a user can, by clicking a specific button, move to Page2.aspx to insert some details and, after saving details, he returns to page1.
if save changes are made on control on page1 before save them to db, obviously, these are lost on return from page2 (because are reloaded on pageload from db).How can i save control status between pages round trip?
My Asp.Net app caches some lookup DataTables to avoid hitting DB for seldomly changed data. When the data does change, however, I would like to use the sqlCacheDependency to get SQL Server to send a notification to my application, which should then reload the table into the cache.
In my application, the callback is not being executed, and the cache is not updated when data is changed in SQL Server.
I am using SQL 2005. This is my code:
***************************
[Code]....
I'm using BlogEngine and i'm changing it a little bit. I tried to show the online visitors number. I added some code in global.asax. My approach is like:
I defined the count of visitors in App start like Application["OnlineVisitors"] = 0
then i increased the count with 1 in the session start and decreased it in session end but it's not working. I downloaded the website to debug in my computer but i never comes to the breakpoint in the session start function. Also sessionstate mode is inprog cookieless= false and timeout = 20
[Code]....
[Code]....
[Code]....
I am having a ASP.net application it having three pages ,page 1,page 2,page 3,when the user navigating between this pages I want to maintain the view state in page level after postbacks(i.e.) .If a user visits page 3, passing some query loads some data .then he moves to page 1 doing some entries .after that he once again moves to page 3 now I want to display the data previously available at the time he moves to page 1, same
way I want to do to my three pages up to the user logging out.
I am getting this error while executing my Asp.Net application.i am not able to execute application using Visual Studio Interface and when i am trying to execute application from Local IIS. its executing well but when i am trying to click any button for searching etc it is giving this error. The state information is invalid for this page and might be corrupted. The detailed information is
[Code]....
[FormatException: Invalid character in a Base-64 string.] System.Convert.FromBase64String(String s) +0 System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +72 System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +4 System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37 System.Web.UI.HiddenFieldPageStatePersister.Load() +113[ViewStateException: Invalid viewstate. Client IP: 127.0.0.1Port: 1307User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5ViewState: 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...][HttpException (0x80004005): The state information is invalid for this page and might be corrupted.] System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +106 System.Web.UI.ViewStateException.ThrowViewStateError(Exception inner, String persistedState) +14 System.Web.UI.HiddenFieldPageStatePersister.Load() +217 System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +105 System.Web.UI.Page.LoadAllState() +43 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6785 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +242 System.Web.UI.Page.ProcessRequest() +80 System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +21 System.Web.UI.Page.ProcessRequest(HttpContext context) +49 ASP.pages__cmtickets_cmtickets_reports_cmtickets_search_aspx.ProcessRequest(HttpContext context) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesapp_mobily_alexmare1eddc658e6f2ba5App_Web_b9acfmsy.14.cs:0 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +181 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
I have copied this shopping cart from the net and incorporated it into my SearchResult.aspx. I understand the code and it seems simple enough but for some reason I am getting an error when trying to run it. Can someone tell me what is wrong below? The generated error stop at the following point: For Each objDR In objDT.Rows. I was thinking that object was not creative during the page load. So I added an
If IsDBNull(objDT) Then
makeCart()
objDT = Session("Cart")
End If
to check if that object exist or not then try to create it. But that didn't work either. :(
This is the error message:
Object reference not set to an instance of an object.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
[Code]....
This is the code to the page. It take the data from a select button on a gridview1. That doesn't seem to be the problem so I didn't added onto here for you guys to see.
[Code]....
how can i use the SqlCacheDependency with StoredProcedure.
I wrote like this, but it is not working.
SqlConnection conn = new SqlConnection("Data Source=SHIVAKUMAR\SQLEXPRESS;Initial Catalog=PracticeDb;Integrated Security=True");
I have a ViewState persistence module that works perfectly on my local machine, but when I move it to our Dev environment, it does not. There are no errors, but the ViewState gets rendered in the page output as if the module did not exist at all.I have checked everything I can think of including the correct code on the server, the SQL connection string where the ViewState is being stored (yes, the code & server has access to the database as we are using the exact same database to store Session state (just different tables) and I can see entries being added for Session state.
As I alluded before, it is almost as if the control adapter in the .browser file is being ignored (or overridden--is that even possible?).Notable differences: my box is Vista w/IIS 7 (yes, I am testing with IIS 7, NOT the VS2010 mini-server). The server is Server 2003 w/IIS 6. Both my boss and I are sure this was working at one point, but as it is "hidden" from normal view we don't know when it stopped.I can provide more details if someone needs, but again the code itself works on my local box and is pretty much from the SDK.
i want to save the recent state of all controls against a button1 click event. e.g. recently selected item of a dropdownlist should persist selected when user loads page next time, if he/she had clicked button1 before leaing this page. And same for allother controls on this page.
View 1 RepliesSession.Abandon() in not working ASP.NET 2.0 (C#) in a few cases. In the same application its working fine in other places.
< sessionState
mode="StateServer"
cookieless="false"
timeout="20" />
The session mode is "SateServer".
I have added a list to the cache with an expiry date, however the expiry date doesnt work, im not sure how long the cached item lasts but its no more than a day.
[Code]....
I've been working on this problem for some time without success. We have this website that has been working for many years now and we have been using cookieless sessions since the begining. Now we are integrating with another site to handle payment throught redirection. This provider ask for two adresses for success or failure of a payment so we have something like [URL] and [URL]. For design purpose thoses two pages do not exists and I use an httpModule to route to the proper page. I use httpApplication.Context.RewritePath to send to the proper page but I can never find back the session my user had before redirecting to the payment provider.
If I change the session mecanism to use cookies (cookieless="false" or cookieless="UseUri") with a few other tweaks, everything works fine Does anybody know if this has a chance to work? Is there a way to re-attach to an existing session?
[Code]....
Now,where(i.e;in which location of my hard disk) can i find the cookie that i recently created? I am using windows vista sp1?
In a page (not default) I have:
Protected
Sub Page_Load(ByVal sender
As
Object,
ByVal e
As System.EventArgs)
Handles
Me.Load
Try
loginRep = BusinessLogic.SR.GetUserName("99999")
System.Web.HttpContext.Current.Items.Clear()
System.Web.HttpContext.Current.Items.Add("RepId",loginRep)
I don't any errors and when in the run in the immediate window:
? System.Web.HttpContext.Current.items("RepId") in the immediate window on THAT page I get the OBJECT.
Then I have a hyperlink with navigateurl to the next page "~/ActCnt.aspx"
On that page, ActCnt.aspx, when in the code I have:
Protected
Sub Page_Load(ByVal sender
As
Object,
ByVal e
As System.EventArgs)
Handles
Me.LoadIf
Not Page.IsPostBack
Then
Dim loginRep
As BusinessLogic.SalesRep = System.Web.HttpContext.Current.Items("RepId")
In the immediate window ? System.Web.HttpContext.Current.Items("RepId") returns a String that is equal to "RepId".
Even if I change it to not be an object, but a string I only get the Name "RepId" of the keypair. I have NEVER gotten the actual value.
In my webconfig file, I am using Forms authentication and I have:
[Code]....
and my default.aspx page is protected as it should. After logging with the proper credentials I am directed to the protected default.aspx page, however when viewing other pages of my website in chrome, and then going back to the default.aspx page something strange happens. From certain pages in my website the default.aspx redirectes me to the login.aspx page, but not from all pages, only certain ones. This behaviour dosenot accour at all in IE Explorer8 where once I am properly validated in my login.aspx page, I can view the default.aspx page from all other pages in my website until I logout from default.aspx page.
[System.Web.Services.WebMethod(EnableSession=true)]
View 6 Replies