Is it possible to update an UpdatePanel manually using JavaScript or jQuery?
What I have is a TextBox at the top of my page. When a user leaves that TextBox I want to run some server code (it will add a record to my database) then at the bottom of the page I have an UpdatePanel which will get refreshed. The UpdatePanel has a GridView which will have an entry for the record added)
I load an aspx page in iframe inside a jQuery UI dialog to update some data, and after dialog is closed I need to update an updatepanel in parent page. how can I do that? to be more specific, there is a datagrid in parent page and after I edit data in a dialog modal iframe, I want to update the row in datagrid.
View 4 Replieslets say I've got a function that iterates over an array. The function is outside the updatepanel, the array is defined within the update panel. The items of the array are dynamically created. On the first try I've realized, that the values of the array do not update when the update panel loads again.
View 1 RepliesI have an UpdatePanel with a MultiView inside. I am using jQuery to call the server to run some logic and based on it, change the view in the MultiView. The problem is that the updatepanel is not getting refreshed.
My UpdatePanel:
<asp:UpdatePanel ID="UpdatePanel2" runat="server" UpdateMode="Conditional" ChildrenAsTriggers="false">
This is my call to the server:
[code]....
When the page loads again, the multiview is not showing the assigned view.
I have noticed that the call to the server doesn't set Page.IsPostback = true, it remains false. Perhaps this is somehow related?
I'm trying to place a user control inside an UpdatePanel.
When the control is displayed, typing inside the TextBoxes has a large delay while in IE (6 & 8). FireFow has an excellent performance. Not only typing, but also scrolling etc experience a large delay up to a few secons.
The usercontrol(s) contain quite a lot of javascript functions that are re-registered using the ScriptManager.RegisterScriptBlock or RegisterStartupScript functions.
why typing becomes so very slow? I believe it has to do something with memory leaking due to the re-registering of the jQuery functions. But I'm unable to find the source of it.
I have a slide in div to display some dynamic data after button submit in it. If you open the div after page load it displays with message "Click on button".
But after submitting the slide effects stops immediately and not responding at all & even message is not updating in jquery slide box. Below is my code:
html:
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Sample</title>
<script type="text/javascript" src="http://code.jquery.com/jquery-1.8.3.js"></script>
<style type="text/css">
[Code] ....
vb:
Public result As String = ""
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Page.IsPostBack Then
result = "Click on button"
[Code] ....
I want a Javascript function to be called automatically after the UpdatePanel has finished updating its contents. I don't want to use:
Sys.WebForms.PageRequestManager.getInstance().add_endRequest
and then call a JS function. This is because I have more than one update panels and I'll have to write all the condions to check which UpdatePanel was actually called and then do something. Can something be done using Triggers in UpdatePanel. Kindly let me know how this can be done.
It would be great of you could post a sample code too.
i have a website with three UpdatePanel Control and inside of each UpdatePanels has ONE Gridview and a SqlDataSource Control.
all gridviews are connected to its own SqlDataSource Control. so technically when i run my website all gridviews automatically get their data from their respective SqlDataSource Control and display them accordingly.
but what i need to do is instead of letting all the update panels to load each gridview their data upon Onload event, i need the updatepanel to update on queue, (Technically changing the UpdateMode to Conditional does not solve my problem.) there will be an event which will trigger the updatepanel to update later.
I've got UpdatePanel with Div
<telerik:RadAjaxPanel runat="server" ID="RadAjaxPanel1">
<div class="pnlFind" style="display:none;">
</div>
</telerik:RadAjaxPanel>
wanna use js for showing this div
[code]....
but after partial postback, I got div invisible again(right! restore DOM) How can I remember that div should be always visible after button click.
My javascript that scroll down the page.
function SetScrollEvent() { window.scrollTo(0, document.body.scrollHeight);}
I update update panel from server side like below.
protected void rptList_ItemCommand(object source, RepeaterCommandEventArgs e){
//HiddenField hiddenId = e.Item.FindControl("hiddenId") as HiddenField;Label lb1 = e.Item.FindControl("Label2") as Label;
//Button bt = e.Item.FindControl("Button2") as Button;if (e.CommandName == "myclickevent"){
// your codes here...SqlConnection conn = new SqlConnection(constr);SqlCommand
[CODE] .....
I use repeater and repeater have button on button click i update the update panel. now where i have to call the javascript function so that it execute after update panel fully loaded. I want to call javascript function after page fully loaded.
Id like to access the ViewModel properties via javascript, i have a jquery treeview and links that fill the contects of a textbox asyncronously using javascriptalong with filling in a texbox, i also want to set the models properties without the need of a textboxFor because its an id and i would like to keep it hiddenwhen updating i need the contents of that textbox as well as the id (which i dont want the user to see)
View 2 RepliesI'm working on an ASP.Net webpage which will use the jQuery Dropdown Checklist (http://code.google.com/p/dropdown-check-list/). I'm fairly inexperienced with JavaScript and completely new to jQuery.
Basically, my question is: How do you update the selected items in a jQuery DropdownChecklist from the server-side?
NOTE: For details on the solution, scroll to the bottom of the question.
Here's some background to give you a better idea of what I'm doing...
I have a jQuery DropdownChecklist which is being populated when the page loads. When a user selects an item in the DropdownChecklist, the selected values are collected and stored in a hidden input field, then a postback is performed, which allows the server to update a server control. This part is working.
Now, here's my problem. This server control, which is actually a usercontrol has a "Remove" button for each selected item in the DropdownChecklist. When a "Remove" button is clicked, it should cause the associated item in the jQuery DropdownChecklist to be de-selected. So, far I haven't figured out how to make that happen.
Here's some relevant code snippets:
Here's the markup...
<asp:ScriptManager ID="smScriptMgr" runat="server" />
<table>
<tr>
<td>
<select id="s1" multiple="true" runat="server" />
[Code]....
We determined the simplest solution was to call the JavaScript function from the client-side rather than try to do it from the server-side. The ImageButton does have an onClientClick event, but for some reason it didn't work. However, wrapping the ImageButton in a client-side anchor tag and using its onclick event did the charm.
I use jquery facebox as delete confirmation box. When i do a delete it removes my record and i show the resultsdiv via javascript. But it always shows
Error: document.getElementById("ImageButtonDiv") is null
here is my code,
[code]....
EDIT:
When my delete confirmation is not within a jquery facebox it gets my element. What could be the issue?
I ve replaced but still not working,
[code]....
I have a script inside an updatepanel. This script needs to be inside the updatepanel as it must be located in that spot.
Now when we click the "LinkButton" to update the updatepanel, the script will dissapear.
It seems that the script only is initiazed on the first Page_Load and Refresh of the page.
How can we keep it when pressing the "LinkButton"?
Complete code is below:
[Code]....
i am using a TabContainer and at each TabPanel i have embed an UpdatePanel in order to update each tab alone.
this is my code:
[Code]....
the problem is that it makes several seconds to update each tab (the same time for every tab) and i asume that this is happening because it updates all the TabContainer and not the selected Tab.
I am trying to trying to setup an updatepanel to update every X seconds, the problem is I don't want the control to actually refresh unless there is new data. So I currently have a child updatepanel in a parent UpdatePanel, the child updatepanel gets refreshed by a timer. But I can't seem to find a way to trigger the parent panel to update. Again, only when certain conditions(data changed) are met.
Sample Code:
[code]....
For an MVC 2 app that relies on many partial views and almost exclusively uses Ajax for POSTs/GETs, what would be the best way to implement the setting, passing, retrieval and display (using a JavaScript modal) of these messages?
My forms all POST (by way of jQuery $.ajax) to actions that return partial views (html) that are used to update a in the "success:" part of the $.ajax function.
I was hoping for some sort of mechanism in the master view that could "listen" for any messages that any of these partial views might be "delivering"--through their ViewData, for instance.
I have two updatepanels on my site (upanProfileSearch and upanMemberList). When I hit the button in the upanProfileSearch it should bind the Data Items in the gridview in upanMemberList and here make a RowFilter on the text in upanProfileSearch. When I make a run to curser, I can see, it happens. It makes a RowFilter. but it doesn't update the gridview. Can anyone tell me why it doesn't update? I have UpdateMode="Always" and RenderMode="inline" on both UpdatePanels.
[Code]....
[Code]....
When I Was Trying To causesvalidation=false for my server side validation control like requiredfieldvalidation.i want manually causesvalidation=false using javascript but i m not done.
View 2 RepliesI am having a hard time updating from my gridview based the value that I am setting in the datakeynames it is the Ucc field I keep getting and index out of range exception on the e.keys[0]. I have done this before so I am confused what I am missing here.
View 8 RepliesIs there a way to manually update a single edmx entity to reflect a new column in a SQL db table? If yes, what would be the proper step- by-step procedure?
I prefer not to use the "update model from db" template because this will update all the tables and wipe out all the customizations and name changes I have already made in the EF objects. This seems a bit overkill for a single column change. I went down this route once, and I prefer not to do it again. I do not see any way to actually update a single table from the DB using VS2010 "update from db".
What I have tried to do so far is manually add a new scalar property to the appropriate entity using the edmx designer, and this seems to work OK, but I cannot seem to find a way to map the new property back to the db through the mapping window. Do I have to do this directly through the XML file? Also is this sufficient to ensure the new column is correctly reflected in the edmx, or are there other steps that need to be done?
I have a webservice which retrieves data from another external service. The data is already in JSON Format. So I retrieve it and set it to the return value (type: string) of my webservice. But according to firebug the webservice then encapsulates the provided JSON-Data with a backslash, e.g. it returns:
[Code]....
instead of
[Code]....
But the JSON provided by the external service is correct. So how could I provide the correct string to jTemplate from my Webservice?
Is it possible to manually fire a AJAX postback from Javascript.
View 4 Repliesi'm using successfully a jquery datepicker with masked input plugin too in a aspx webform. I've noticed a bug: when i insert a date by choosing it on the calendar and then i try to modify it manually, the date suddenly disappears.
View 6 RepliesI have two nested UpdatePanle and a button and an editor in parent panel and a GridView in child panel.
<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:Button ID="btn_UsersList" runat="server" onclick="btn_UsersList_Click"
Text="users" />
<asp:UpdatePanel ID="UpdatePanel2" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:GridView ID="GridView_UsersList" runat="server">
</asp:GridView>
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="btn_UsersList" EventName="Click" />
</Triggers>
</asp:UpdatePanel>
<FCKeditorV2:FCKeditor ID="FCKeditor_Message" runat="server"
BasePath="~/fckeditor/"></FCKeditorV2:FCKeditor>
</ContentTemplate>
</asp:UpdatePanel>
I'd like to update the child panel when click button but don't update the parent UpdatePanel.