Configuration :: Upload Via FTP Works When Code Runs Locally But Not From A Remote Server?
Nov 15, 2010
I have a page which uploads a file from server A to server B. The user first uploads the file to server A, where it's saved into a diretory, then once the file is safely stored there, I'm transferring it to a second server, server B, using the following code:
[code]....
So, in summary, the only difference I can see between the working case and the non-working case is the server that'ssending the file.
View 4 Replies
Similar Messages:
Sep 20, 2010
I created a WSDL with Visual Studio 2005 and tested it using localhost. It worked exactly as anticipated and returned the expected results. I basically called the WSDL from a classic ASP page using Server.CreateObject("MSXML2.ServerXMLHTTP.3.0") and all went well. The url was http://localhost/service.asmx/methodname.
I deployed the WSDL to the remote server and tried to access it the same way; I changed localhost with the domain name as http://domainname/service.asmx/methodname. But now I get 'Post to http://domainname/service.asmx/methodname failed with 500.
View 5 Replies
May 7, 2015
I have a site (URL...) which loads and runs fine locally on the server itself, but when I try to access this externally from outside of the server (and firewall) will not load. In Safari for example, I get the message "Safari could not open the page because the server stopped responding".I have other sites on this server that do load and operate fine so I don't belive this is a Firewall issue. One thing I did notice however is that when the error message appears, it seems like the site is trying to change the protocol from http to https.
I'm trying to debug this to find out what could be happening. I've tried looking into the IIS logs as well as the Event Viewer but I see nothing. I have even tried to turn on Failed Request Tracking but no errors are logged.
View 1 Replies
Oct 8, 2010
I have a menu that uses a sitemap. The menu works locally, but not on the server. Below is my code for the menu, data source, and the sitemap. why I can run it locally and use the menu, but I cannot use the menu on the server?
[Code]....
View 9 Replies
Sep 25, 2010
I have developped an asmx webservice with visual studio and I deploy on IIS 7 which has 3.5 Framework by copying all the files.
When testing it says
Could not load file or 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
I don't use [System.Web.Script.Services.ScriptService] so I don't understand why it tries to load System.Web.Extensions.
Note: I'm not using any other assembly/lib I'm just learning webservice so it's very simple: I create a webservice Test.asmx with one method which uses one class Test.cs within same namespace WebServiceTest. This works locally.
View 2 Replies
May 28, 2010
When I deploy my web service, I get the following error:
There is no build provider registered for the extension '.svc'. You can register one in the <compilation><buildProviders> section in machine.config or web.config. Make sure is has a BuildProviderAppliesToAttribute attribute which includes the value 'Web' or 'All'.
I found one thread ([URL] that a solution but, I can not get it to work. If I make the changes to my web config file as in the thread, I then get a configuration error. One odd thing is that, if I check the machine.config file on my machine, located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIGmachine.config, I don't see any of the config settings described in the thread. As a matter of fact, there is no mention of "compilation" or "buildProviders" at all.
Here is my entire config file listing:
[Code]....
View 2 Replies
Apr 20, 2010
The error is mentioned below, the cssfriendly.dll is in bin, and browser file is in there app_browsers folder. And it is working in same PC (developping PC), on remote server that belong to my company (i just installed .net 3.5 on that server)
I tried uploading the same site on 2 dufferents hosting, and finally i got the same error. What could gone wrong ? I tried contacting the hosting support but they work in ticketing system and this is extremely slow.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load type 'CSSFriendly.MenuAdapter'.
Source Error:
[Code]....
View 4 Replies
Apr 16, 2010
I have a button on a page that when clicked should bring up the users email system (MS Outlook).When I run my application locally on my test machine, I click the button and my email comes up.However, once I moved the application to the web server, when I click the button, nothing happens.Can you tell me what is wrong? Below is the function I am using:
[Code]....
View 4 Replies
Feb 3, 2010
A site that utilizes Windows Authentication.It accesses the LOGON_USER variable to pull the domain and user.It works fine in the development environment.It works fine on one of my servers.We are in the process of setting up a new server for this application to be hosted on.When I setup the new server,the LOGON_USER is always empty for remote computers.Windows Auth is turned on.I have tried it with Anonymous Access on (how the current server is setup) and also off.If I remote on to the server and run the application locally,LOGON_USER is filled.When I access the site via IE from a remote machine,it prompts three times and then fails.Even if I key in credentials in the Windows prompt.nothing
View 6 Replies
Nov 5, 2010
I can't believe the number of issues that seem to work fine on test but completely crash and burn on production.I have a situation where the code works fine in the test/development environment, but when you press a button in production, it crashes with:
[Code]....
Its just a button push, that is suppose to rebind a quantity change back to the database that the user has changed in a textbox in Gridview Edit.
[Code]....
[Code]....
View 3 Replies
Jul 4, 2010
some differences hosting a website on some remote server VS running it locally on dev environment.The reason why i am asking is, If I run my website locally it works fine no exceptions, runs smooth. But when deployed on a remote hosting server. Its like a nightmare to me :(very often i get object Instance not set to instance of object..... I am ok with the error message, But the same situation should happen locally,
View 6 Replies
Aug 5, 2010
I am uploading video files, which are somewhat large (5mb - 50mb) via asyncfileupload. I am able to successfully uploaded files of all sizes up to 1.5gb, that I've tested, on my test server and also locally on the production server. It works great, locally.
However, when I process the form that is hosted on my VPS server from my home, it tanks out and I usually receive the error: Access is denied. However, it works occasionally for small files. <1.5mb
I have edited and re-edited all of the associated config files, etc...So it shouldn't be a file size issue-especially since large files are successful locally.
I've also adjusted the UploadReadAheadSize attribute as described in another forum.
I set all of the folder permission so that everyone can read write as well as IUser, IIS_WPG, IIS_Iusr, Network Service am I missing a permission field?
Does anyone know of other settings that I would have to implement in order to get this working for my users.
are there any c# tricks for slower connections?
I am working with VS2010 in a win2k8/iis7 .net4.0 environment.
View 1 Replies
Aug 16, 2010
I have developed a web application in asp.net with c# with out using master page. I have developed this application in iframe.
The problem is that my application run smoothly but suddenly it stops and do some processing and it run again smoothly.
it stops any where on page load, on button click, on checkbox changed. i can not tell where it stops
it stops only when page post. i can see the processbar on browser's statusbar it stop for long time 40 to 60 seconds and after that i fire same event now process complets within 2 to 5 seconds
Hosting server detail :
1. IIS 6.0
2. Window server 2003.
3. Sql server 2005.
View 4 Replies
Mar 3, 2011
I need to declare an instance of a custom class and add it to the Application collection as soon as our ASP.NET site starts on the server.
So far, we have it doing it on the first page load of a master page, but that can take a few seconds because this class is a little intensive, so the first user is required to wait a couple seconds while the web server completes its task.So where do I need to go to do this?
View 3 Replies
May 24, 2012
I developed a web service in VS2010 on my local machine, wrote a consumer of it also locally, and that all works.
I copied the dll and the asmx file to our server, and I am getting an error when I try to invoke it from a browser (also still on the server machine) to make sure it correctly exposes its web methods, but it is not, it is saying "Could not create type 'Service'". That error comes from this line:
Line 1: <%@ WebService Language="C#" CodeBehind="~/App_Code/WarrantyDuplicate.cs" Class="Service" %>
There other web services in the same folder on the server that all work fine so I don't believe it's an IIS setup thing.
This is my first web service in C# and when I created it in VS I did think it odd that the code behind file went into App_Code (as you can see from the line in the asmx file) and is just named dot-cs rather than asmx-dot-cs. But since it worked fine locally, I wasn't sure that mattered.
View 2 Replies
Oct 18, 2010
How can I use Html.RadioButtonFor to create radio button which when clicked runs code on the server and controls visibility of certain text box. earlier I used to create <asp:control with autopostback="true"
View 2 Replies
Mar 26, 2010
I am getting this error after uploading my web app to my Rackspace box.
CS0246: The type or namespace name 'User' could not be found (are you missing a using directive or an assembly reference?)
It's odd because it works fine on my local computer where I do development. The actual line of code is:
public User user = new User();
I am using C#.
View 1 Replies
Feb 16, 2011
I have a new MVC3 project with one Controller called PublicController.cs which contains 4 identical methods for testing out how routing works. The only difference between them is their name, and that they each point to a different view ...
public class PublicController : Controller
{
//
// GET: /Public/
public ActionResult Index()[code]....
My web-server is shared hosting with netcetera, using a sub-domain for this deployment (previously had problems with MVC in virtual directories, but have full blown MVC2 apps running in sub-domains no problem). I've deployed by using the "Publish to file system" option, then copying over the files aswell as just copying the entire source project over. Both give identical results.
View 1 Replies
Mar 15, 2011
Let's say that I have my ASP.NET web application in a directory called "MyApp" both locally and on a remote server. I'm trying to build an onclick response to a link. The response calls a Javascript function, passing it the URL of an .aspx page in my web app. The Javascript pops out a new window displaying the page. My C# code looks like this:
link = new HyperLink();
link.Text = product_num_str;
link.NavigateUrl = "#";[code]....
I started using the Request's Authority property because I was having problems running locally on the Visual Studio web server when I used the Host property. The problem was that Host only returned "localhost" instead of the host and port number. When tested locally, the code works because the "authority" maps to my app root folder. The URL generated is, e.g.,
http://localhost:52071/ProductInfo.aspx?_num=123
If I run on a remote server, however, I end up with something like: http://company-server/ProductInfo.aspx?_num=123
This fails to find the page, because in this case the "MyApp" root folder must be included.There is probably an easier way - putting an entry in the web.config or something. My motivation originally was to allow the app to be published to a folder of any name and work as is. I could hack my approach and search the string for "localhost" or something, but that's ugly. So how do I build a string that will work everywhere?
View 1 Replies
Feb 1, 2011
I am developing a intranet application in C#.
I am developing a application where files can be uploaded to staging area. and after saving to staging area a email confirmation is send.
After browzing for the file from local drive ,user gives a email id and click upload button ,then file should be saved to staging area. and then aconfirmation email should be sent to email id entered. we are using Exchange server to send emails.
View 2 Replies
Apr 14, 2010
, I've researched this quite a bit and I'm just not seeing the problem. The app runs beautifully when living on my pc - the app on my pc connects successfully to the SQL Server 2008 Express Database (which sits on a server - not my pc). However, as soon as I publish this application to the server that the SQL Server 2008 Express Database sits on, I get this error when I try to run the application:
ERROR [42S02][Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'user'
It's behaving as if it either doesn't know where the table is when the app tries to run on the same server as the database or maybe the app doesn't have permission to hit the database once the app is on the same server as the database. I have connections on my pc and the server defined for this database, I verified that I set up each connection the same. I've also tried connecting using [dbo].[user] and this doesn't remedy the situation either. my connection string is in my web.config and it looks like this:
<add name="directoryConnectionString" connectionString="DSN=directoryProd" providerName="System.Data.Odbc" />
my sql looks like this:
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
connectionstring="<%$ ConnectionStrings:directoryConnectionString%>"
ProviderName="System.Data.Odbc"
SelectCommand="SELECT fName FROM [user]"></asp:SqlDataSource>
View 1 Replies
Jan 6, 2010
This is very strange behaviour from my login control - locally it works fine - But deployed to the web server (With an external hosting company) it gives a windows prompt, even though the authorisation is set to "Forms".Here is my web.config file:
[Code]....
View 13 Replies
Jul 6, 2010
I have a problem with upload a picture from desktop to a folder on server. The problem is that it seems to work about 1 of 10 times wich confuses me. Perheps something with this code is not enterily correct ?
First I check for if Pic1.jpg or Pic1.gif exists and then delete it if it exist. Then I want the uploaded picture to be named the same. Pic1.jpg if it is .jpg format or Pic1.gif if the uploaded picture has a .gif format.
[Code]....
View 35 Replies
May 14, 2010
My application running locally on my PC - on the Visual Studio Server (Cassini Server).My SQl Server DB is hsosted in a server on the internet.I think there are some configurations to be done in the SSMS ( Enable Remote conn.).
View 1 Replies
Jun 13, 2010
I have an interesting challenge. My application uses a third party's services and one of the functions is to upload video files to Amazon S3. The current solution I've implemented uses a simple form with a POST action set to a URL on Amazon's system. The
issue I have is that because the form posts to Amazon, I have no way of doing any type validations before the user clicks to upload the file i.e. checking file type, file size, etc.
However, I really do NOT want to set up my logic so that the file is first uploaded to my server then to Amazon because these are huge files and we'll end up using costly bandwidth on both ends -- our server and Amazon S3.
P.S. To be perfectly honest, I'm not that pleased with the current solution where it's a simple HTML form with a simple post to Amazon. However, because Amazon is so picky about all the hidden fields in my asp.net page, I had to strip everything off the
page -- including form runat"server" because the minute I have this, I end up with a hidden field for ViewState -- even if I completely turn off ViewState. There's always something left as a hidden field and Amazon was generating an error because of this.
Ideally, I'd love to be able to do an HttpWebRequest in code behind so that I can have the functions of a web form back and do some pre-upload work but I'm not sure how to upload the file to a remote destination without putting the file on my server first.
View 3 Replies
