As I wanted to try out the new VS, I started and began working on a C# web project that I had previously started in VS2008. So far, so good. But then I noticed that Intellisense is not working at all. I have done some searching, but all I could find were some problems with the release candidate version crashing.Does anyone have any insight as to what might be causing this and how to resolve it?
View 3 RepliesI used to have intellisense for Javascript, including JQuery, in Visual Web Developer 2008. However in 2010 it has disappeared. I have tried resetting my settings,
View 3 RepliesI wonder if any of you guys could help me. When writing code occasionally I hit return to start a new line and the line is started from the far left instead of the same indentation as the line above like I would expect and when typing there is no intellisense, its happened a few times now
View 1 RepliesIs there a good way to apply intellisense in .skin files in ASP.NET 4? like a microsoft visual studio tool for example? I installed an intellisense schema for .skin files to my visual studio 2008 long time ago but it had some bugs so i had to remove it. any improvements in visual studio 2010?
View 1 RepliesI thought I would try this forum first, but it may be an ASP.NET general question.
I have setup profile in a web.config like the following:
[Code]....
However when I try and reference the profile in a code behind using the "Profile.blah-balh" the intellisense does not pick up the elements I have defined in the web.config.
Intellisense is generally working and does sport the Profile() starting point when typed.
I've got a c# project that is full of intellisense comments, and this project compiles to a DLL. Now when i add this dll as a reference in another project, i don't get intellisense when accessing the members of the original project.
View 2 RepliesI am using Visual Studio 2008 SP1
I have two master pages: TopLevelMaster and NestedMaster
When my page points to NestedMaster as it's master page, intellisense quits working in the .aspx page.
If I change my page to use TopLevelMaster as it's master page, intellisense works.
No matter what I use as the master I always get a green squiggly underline under the Content control that brings up a tooltip that says "Could not find ContentPlaceHolder1" in the current master page or pages"
TopLevelMaster exists in a different project than NestedMaster and the page.
When I say "intellisense quits working" here is what happens:
If I type something between the Content tags I get no intellisense for asp controls:
<asp:Content ID="Content1" runat="server" etc.., etc..>
Only html controls appear upon typing an open angle bracket here
</asp:Content>
If I instert a div element I can type an opening angle bracket and I see a list of all asp controls. If I choose one and start typing there is no intellisense after that:
<asp:Content ID="Content1" runat="server" etc.., etc..>
<div>
ASP controls appear but no intellisense other than asp:ControlName
</div>
</asp:Content>
Opening one or both master pages in the IDE has no effect.
I deleted Visual Sudio temp files.
I made a custom server control library that all of our websites will be using. I have registered the dll in the global web.config of our production and development servers, and everything runs fine in the browser. The only problem I have is Visual Studio/Intellisense not recognizing my control. I get the error message "Unknown server tag...", which in turn throws other validation warnings. Does anyone know how to tell Visual Studio to include dll's registered in this location? Our sites are .net 4.0 and below is an excerpt from the web.config located in %SystemDrive%WindowsMicrosoft.NETFrameworkv4.0.30319Config on the servers.
<pages>
<controls>
<add assembly="[assembly info]" tagPrefix="irnrControls" namespace="IRNR.Controls"/>
</controls>
</pages>
It's not that big of a deal right now as I only have one control in the dll, but I would like to fix this before I add more controls.
Edit: I can't debug the site and it fails when I try to build it. The Output window displays "Unknown server tag".
I have an MVC 2.0 environment in a S#arp layout, everything works great, and I have Intellisense working in my aspx file (for things like HTML helpers and Model properties) As soon as I add the line:
[Code]....
To my web.config, I lose Intellisense on my aspx files! Does anyone have any idea of why this is happening? Or have any experience with this?
I just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
View 1 RepliesI think my main problem is actually more to do with master pages that anything else.. Below is a description:
If you use master pages in your website and you have pages in different sub directories then the simplest way to add JQuery references is using <script src='<%# ResolveUrl ("jq.js")%> /> in the master page header??
This means that the .js files are correctly referenced in all pages that use the master. My main problem is that intellisense only seems to work for JQuery when the JQ Script is actually referenced in the header and not by using ResolveUrl('') <script src="/scripts/jq.js" />
I dont want to have to live without intellisense, Surely there is a way to get around this. What am I doing wrong.
I tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
View 1 Repliesi get this error.What should i do ?
I even tried webapplication setup project is it not ready to deploy with RC ?
<compilation debug="true" targetFramework="4.0">
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately. Parser Error Message: Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive.
I need to a powerful JavaScript Intellisense for Visual Sudio 2008.
View 1 RepliesI have VS2010 ultimate on my win7 64bit system installed. I can't get any of the ajax extensions or toolkit controls rendering on my designer in VS2010. When i try to drag a toolkit control onto the designer surface it just creates <p> xml nodes. This is a similar problem that this person had: [URL]
View 2 RepliesI'm thinking about installing vwd 2010 or vs 2010 express but want to know if either offer integrated jquery support.
View 4 RepliesI have a website written in html and jquery that is working fine in safari or chrome, but its iframe not working in ie8. I debug it in visual studio 2010 express, and get "Microsoft JScript runtime error: Object doesn't support this property or method" in ui.tabs.js.
View 5 Repliesi have installed latest vs 2010 ultimate on windows 7
it works fine but as i want to close a website it sayas vs has stopped working restart/debug
what should i do?
I am using Visual Studio 2010 and ASP.NET 4.0 to build a WebForms project that uses the new routing features in System.Web.Routing. When I build my solution and run it from within VS.NET's debugging environment only routes with RouteUrl's that include a ".aspx" extension are being properly routed to the PhysicalFile. It appears requests made to other URLs are not being "detected" by the routing engine for processing. In the case below, "Scenario1" shows a 404 and "Scenario2" works properly.
Here is the relevant code in my global.asax:
[code]....
Inside VS 2010 I do not have any intellisense working. I have reinstalled everything and still nothing is coming up for intellisense?
View 2 Repliesis it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
code behind - in a separate file. I've just upgraded from VS2005 to VS2008. #In an aspx file I have (for example)
[Code]....
However, in the code behind aspx.vb, when I type:Label1 then press '.'I don't get intellisense automatically pop up the members and methods. I've done the reset of the intellisense in Options > Text Editor but that didn't fix it.
Using VS 2010 Beta II, I am pretty sure that intellisense was working a while back when I was editing CSS files or Skins. It doesn't work now. How do I turni it back on?
View 1 RepliesI am using VS 2010 with MVC3 and Razor view engine but on the views when I write @... I never have intellisense. Do I need to do something?
View 3 RepliesI'm so new at this it's pretty pathitic. I have Visual Studio 2008 Team edition and I'm following the walkthough in the help file about how to create your first basic site.All went well until I got to that part about "Put the insertion point after asp:Label in the <asp:Label> tag, and then press SPACEBAR.
A drop-down list appears that displays the list of properties you can set for aLabel control. This feature, referred to as IntelliSense, helps you inSource view with the syntax of server controls, HTML elements, and other items on the page. The following screen shot shows the IntelliSense drop-down list for theLabel control.IntelliSense for Label control"