Visual Studio :: The 'HTML Editor Package' Package Did Not Load Correctly' Getting Error Message
Feb 14, 2011
I downloaded and installed VS 2010 Ultimate as a trial and I received "sucessful" message at the end of the installation.
But when I opened VS 2010 Ultimate I received this warning "The 'Visual Studio HTML Editor Package' package did not load correctly.' error message".
The next thing I know is that all the Toolbox icons are grayed out (I tried to create a .NET web application). There is no design/split pane.
View 1 Replies
Similar Messages:
Jun 24, 2010
I have been trying to install VS 2008 profesional in my computer, I am getting this error "Package Visual Web Developer HTML source editor package has failed to loas properly GUID = BFCC0C3C-6F87-4285-A6C8-BB1606180OD Please contact package vendor for assistance, application restart is recomended , due to possible environment corruption.
View 7 Replies
Feb 22, 2010
installing visual studio 2010 pro RC in windows Xp SP3 and getting a message prompt : invalid windows installer package contact vendorlog file says
Error Message:
[02/22/10,17:09:07] Microsoft Application Error Reporting: [2] CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
[02/22/10,17:09:07] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[02/22/10,17:09:08] VS70pgui: [2] DepCheck indicates Microsoft Application Error Reporting is not installed.
View 5 Replies
Mar 18, 2010
When I first installed VS in german several "package errors" popped up. They had the option to ignore the message or disable the package. Ever since I'm trying to fix that by kinda "reallowing" the package, or reinstalling it. I even deinstalled and installed VS completely, without success. I discovered a solution for when someone would have clicked to "ignore" the message, but not for when the packages were disallowed. Disallowing these packages results in a VS not recognizing Markup / CSS language.
View 1 Replies
Nov 18, 2010
When i was building my project in my local machine it was giving me the below error...."Error 1706:An installation package for the product Microsoft Visual Studio 2008 Shell(integrated mode)ENU cannot be found!!!Try the installation again using a valid copy of the installation package 'vs_shell.msi'"
View 1 Replies
Feb 2, 2010
I got an "Package load failure" message as below:
Package "Microsoft.visualStudio.ShellConfigPackage..." has failed to load properly.
I uninstall and re-install vs2008 but no luck.
How to fix it?
View 1 Replies
Jan 17, 2011
I have an asp.net app in visual studio and it's starting to contain quite a few files. I remenber seeing a .sln file format that converts the entire files into one file. How does this work?
View 1 Replies
Aug 11, 2010
I am trying to convert guidance package of vs2008 to vs2010,
followed instructions as per this link {http://msdn.microsoft.com/en-us/library/ff697211.aspx}
and getting error as
Error 1 The "GenerateMenuResource" task failed unexpectedly....
View 1 Replies
Mar 18, 2010
Ive created an SSIS package (vs2005, so vb.net only) One of the tasks has to unzip a zip file. To do this ive used java.util.zip library and written some code to unzip the file. Ive just been asked if its possible to use something other than a java library as our network engineers dont want to put the this on our server. Is there anything similar to java.util.zip that I can use in a vs2005 package ?
View 2 Replies
Jan 8, 2011
i am having a problem. i want to get info on a package from database and get the software linked to that package.. my db looks like this.
[Code].....
View 1 Replies
Dec 30, 2010
I got VS2010 and SQL Server 2008 R2 64bit installed on a Windows Server 2008 R2, I need to execute a SSIS package from ASP.NET. From the research most people uses DTS, but it seems DTS does not support for 64bit, does anyone have a way make it working without using DTS?
View 1 Replies
Aug 30, 2010
I'm looking for any and all information on how to execute an SSIS package from my asp.net web site. I have written the call and when I run the application from (Localhost) it works, but when I run it from the server it does not.
Here is my code to call and execute the package:
[Code]....
Again this works from my local machine running from localhost, but not from our live server. I have turned on impersination to see if that worked and still getting the same result. The file is written successfully to the server without issue, but I'm just lost.
View 1 Replies
Feb 14, 2011
I am trying to update NuGet Package Manager from ver.1.0.11220.104 to version 1.1.229.160 using the VS extension manager, but the install fails on VS2010 Ultimate Version 10.0.31118.1 SP1Rel because of a signiture mismatch; see error below.
[Code]....
View 7 Replies
Mar 27, 2011
Can I create an incremental deployment package using either Visual Studio 2010 Web Deployment Projects or Web Deploy (Web Deployment Tool) .
I need to automatically select changed files from a source and destination or a change set on TFS and build a deployment package only with the changed files.
View 9 Replies
Jul 22, 2010
I don't understand how to use this feature called "Build deployment package" in VS 2010. I go to my properties and go to package/publish web and setup it up. I click "Create deployment package as zip"
I then build the deployment package and get a zip file.
When I look into and start drilling down in the folders I find I get a path like this
[Code]....
I don't understand why it makes all these folders and on top of it why is it my path to where my soultion sits. I don't like the fact that now everyone can look in the zip and see my accoutn name, where the file was sitting, that I am using subversion.
Then it makes it so confusing to when a error happens. I deployed it on my IIS windows 2008 server and ran it and I had a error show up. It pointed to the file where the error occured and the path was point to my desktop.For the longest time I could not understand why it was pointing to my windows 7 machine desktop when it was running on a windows 2008 server located in a different country.
It was not until I found out with the zip path it made sense. But that is confusing when it is pointing to paths that don't exist on that computer.
How can I change this?
View 4 Replies
Oct 5, 2010
I have a web setup package project alongside an old .asmx web service. When I build it I only get 'MyService.msi' and not the 'Setup.exe' in the 'Release' folder after build. Normally the .msi suffices for installation, but on Windows Server 2008 R2 I am getting denied from installing the .msi pacakge. I can only install .exe packages after right clicking and stating "Install as Administrator".
The server admin is still new to 2008 R2 and not sure why I can't install an .msi because I am an admin, so for now if I knew how to get that web setup package to generate the Setup.exe file as well I see my other VS.NET setup packages create.
View 1 Replies
Feb 8, 2011
When I try to select the Designer view in VS 2010, I get the following error message:
There is no editor available for 'c:user eadrinkinggeekdocumentsvisual studio 2010websiteswebsite2About.aspx'.
Make sure the application for the file type (.aspx) is installed.
I shut down and reopened VS but still the error appears.
View 2 Replies
Mar 10, 2011
Created SSIS package, it runs fine I import it into Stored packages in Integration Services, I right click and click "Run Package" it runs fine Create a new job to run the package and I get errors
The package runs an Execute Package task. That seems to be where the errors occur. But it runs fine in all circumstances except from a "job".
Note: ALL THE ERRORS ARE IN TASKS THAT CONNECT TO A REMOTE SERVER.
[code]....
View 6 Replies
Feb 17, 2011
I'm trying to install a site search software called FindInSite. After following the instructions, and having a network guy do some of the set up, I get an error in the main config.asp file when trying to load one of four test pages. I can load the one html test page, but all three aspx test pages will generate the same error. The error itself is below:
[Code]....
Since this is an error in loading the roll provider for this particular page, I'm guessing that there is something wrong with the virtual directory or physical directory that was created for this software. None of the other pages on the site generate this error.
View 2 Replies
Aug 24, 2010
perhaps i have found a bug in Visual Studio 2008 Team Edition.Every thing was going well.
I started to build my project, but for certain reasons i went to Built Tab and while the project wes in build process i clicked Cancel Button.Alas!! after that my class file has gone to non-editable mode.It is giving this error:
"cannot currently modify this text in the editor.It is read only ".I closed and again opened Project but no improvement.I went to Tool->Import Export Setting->reset all settings but no benefit.
View 2 Replies
Mar 10, 2011
I am getting really fed up trying to install MVC 3, I have bloged about the problem here - [URL] To sum it up, after ages of digging around, I finally managed to track it down to the aspnetwebpages.msi component. I am not sure what to do next as I have tried to repair, remove, force delete as well as a few other things, but I am just getting no where. I have a normal system - I upgraded to Windows 7 SP1 yesterday, VS 2010 SP1 today and have never had any Betas installed apart from Web Matrix which I uninstalled today (after the VS SP1).
The exact details of the error is: Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action WebConfigCA_Remove, location: C:Program Files (x86)Microsoft ASP.NETASP.NET Web Pagesv1.0WebConfigWebConfigCA.exe, command: -u Logging stopped: 10/03/2011 01:22:31 ===
View 7 Replies
Jan 8, 2010
I had to reload vwd 2008 express and sql 2008 express on my laptop. After loading cannot launch vwd, get this error message. Can anyone please suggest a remedy "Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed."
View 1 Replies
Mar 24, 2011
I will try to be more clear. At first I had trouble with thew relay-ost.secureserver.net, but now when the submitt button is clicke on my websiteI get an error message that says that there is an error in my "ContactUs.aspx.vb" file on the line containing "mailClient.send(message)" . Should I change that line or the code in the line that it referes to. I have ran "Debug" and fixed all errors in the page, but it just will no work on the website.
Partial Class ContactUs
Inherits System.Web.UI.Page
Protected Sub CustomValidator1_ServerValidate(ByVal source As Object, ByVal args As System.Web.UI.WebControls.ServerValidateEventArgs) Handles CustomValidator1.ServerValidate
[code]...
View 4 Replies
Jan 26, 2010
When I run a web program from visual studio .net 2008 then it output is displayed in Mozilla Firefox and a error is appear 'page load error, try again'. If I copy the url and paste it to the Internet explorer then it runs. How can I recover this problem and set Internet explorer as default browser for Visual studio .net 2008
View 3 Replies
Feb 8, 2010
I'm having a class with these code
[Code]....
and I'm accesing this class from ASP.Net
[Code]....
when opening Default2.aspx
[Code]....
there is a just warning from Visual Studio.Net 2005 like this :
[Code]....
I want this warning message disappear from my error list.
View 1 Replies
