I have Oracle 10G express edition. I have configured it on windows 7 system. Now I want to make a 64 bit application using visual studio 2010 and connect to oracle 10 g server. If I run my application in VS2010 explecitly in 86 mode then I am connected to database but I want it to happen for 64 bit
View 2 RepliesI have a clean installation of Windows 7 with VS2010 RTM and am trying to get the ASP.NET Development Server to work. When I run the project, the WebDev server starts and shows that it's listening on port x on localhost. I've tried:telnet to the port. The port is not listening. running netstat -o shows that the WebDev server is in fact not listening on any port. manually changing the WebDev port to a different port and restarted VS without effect. I have Windows Firewall turned off entirely and am not running any other firewall software either.
View 1 RepliesIs there anything special to do with Windows 2008 R2 Server and Visual Studio 2010 to get Oracle quereis to work? I have the same DB Connnection.string I have used before and it works. I am at a loss here.
View 6 RepliesI tried to connect to the SQL Server (2000) with the VS 2010 Express. I got error saying "This server version is not supported. You must have Microsoft SQL Server 2005 or later".
View 1 RepliesI am having an issue coinnecting to Oracle using the Oracle Database (OracleClient). I can connect to Oracle using other tools such as TOAD, POWERBUILDR, SQL PLUS but not Visual Studio. These other tools use the TNSNAMES.ORA file so that is not the problem. I can use use oledb and it connects ORACLE but not the ODP.Net.
View 1 RepliesHow to connect to a remote oracle database with Visual Studio?
I know how to create the connectionSting in web.config. I wonder if I can connect to an oracle database when creating a LINQ class so that tables will show in the Server Explorer.
I got these errors while trying to run a web application using vs 2008, The first error is this: >Application has generated an exception that could not be handled. >process ID=0x1130 (4400), Thread ID=0xe6c (3692). And when I press OK a second dialog reports this error:>unable to connect to the asp.net development server. I reinstalled, repaired and re registered msdbg2.dll and edited hosts file but still get this error. I need to debug an application but I can't. This error is on a 'Win 2003 server enrterprise service pack 1' with a vs2008 team system installation. What can I do to remove this error and run and debug my application?
View 1 RepliesMy colleague and I are both using VS 2010 and we have created a web application each. We can both publish our own applications to a ftp (web host's) and it works fine. However, if my colleague send me his solution and I run it locally on my machine it works but when I try to publish it I get promped for password and I enter it (same as I use for my application) but it fails. Same for my colleague if he takes a copy of my solution and tries to publish it.
View 1 RepliesI'm trying to deploy my MVC 2.0 web application to a Windows 2003 server with IIS6, and can't find the means to do it. I read about clicking Build/Deploy, but I don't have this showing on my menu, and I have the professional version.
View 1 RepliesIn Visual Web Developer-2010, I have been trying to connect to IBM DB2 Database after installing the DB2 9.7 client (both supports VS2010/.Net4) so that I can use "ADO.NET Entity Data Model", but while clicking "New Connection" I can only see the list of Data Sources and Data Provider only related to MS SQL server. This is totally blocking my work, I am not able to work further since I cannot even establish the connection to my db2 database using this new editor so that I can create the edmx files in the solution for non MSSQL databases. Kindly provide me the solution ASAP, since my further work is blocking due to this.
View 2 RepliesI have been ising TFS 2010 with VS 2010 Ultimately for a couple of months now. I have a client who is using Visual Web 2010, does anyone know if this integrated with TFS easily?
View 1 RepliesI'm trying to publish my ASP.NET web application in Visual Studio 2010. I'm then trying to install it as a website on a server using IIS. I've gotten my application to publish (to a .zip file) but it points to the physical directory on my hard drive. This obviously will not work on the server.
View 3 RepliesI tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
View 1 RepliesIs there a way to make a new project file using Visual Studio express 2010 using the files downloaded off a server from an asp.net web site? If so what are the steps? I would like to make a new project out of the old files without starting from scratch, I don't want to just edit a couple of things I would like to create a project file using the files I can get off the server if possible. It would be C#.
View 1 RepliesWe have a site that is runnig II7 64 bit with the oracle .net 64 bit provider, when I try and open this in web developer 2010 express (I'm running windows 7 pro 64bit) it says it can't load the oracle dll as its an incorrect format. I got the impress that web developer 2010 was 64bit capable.
Ofcourse this is extremly annoying as I don't get any syntax formatting for the project or intellisense.
I like the way that the chart control seems to automatically determine the X axis range for me based on the data, but in this case, the data can only be whole numbers.
What is the easiest way to specify whole numbers for this axis?
I'm getting "Cannot connect to ASP.NET development server" almost every time I stop the ASP.NET server before restarting the project in debug mode. It can take between 15 seconds and 2 minutes to get the error message, and Visual Studio is frozen.
Sometimes I get three in a row, and I have to wait 2 minutes each time, or go into Task Manager and kill to process. Then I have to start Visual Studio 2010 again, which is at least three times slower than Visual Studio 2008 to open.
It's *extremely* annoying. I know I don't have to close the server if the code has changed, but sometimes I simply want to restart my website in debug mode (there is a cache on most web service calls, so this clears the cache). A workaround is to add "foo" code to a class and restart the project.
I'm running Visual Studio 2010 Professional on Windows Server 2008. I'm running the Visual Studio Power Tools too, with the latest update.
I'm thinking about installing vwd 2010 or vs 2010 express but want to know if either offer integrated jquery support.
View 4 RepliesI'm getting this problem with one of my web projects. I've looked at [URL] and other suggestions around the place, none of which apply here. The odd thing is, it's occurring with *one* of my new web site projects, but not another one. Odd again is that they're both 100% fresh sites, created with the "New Web Site" option in the File menu, within a day of each other, and nothing has been done to them, apart from a bit of "hello world" html. WebSite1 was created first, and Cassini worked when I first created it the other day. A day later, I created WebSite2 and Cassini worked (and still works) with that one.
However, when I open WebSite1, I get the above error code - again, it was working fine the other day, and WebSite2 works fine. I've compared their .sln file - so differences apart from the VWDPort number used, and of course the path to the site and various GUIDs. Everything else is identical. Same with comparing web.config files. No differences there at all. So I'm stumped - why would Cassini start up fine with WebSite2 (and subsequent sites I create) but suddenly stop working for the WebSite1 project, when it was working ok a couple of days ago?
Whenever i run the project this problem occur Can any one give me solution. should i have to delete webdev.webserver.exe and install another is this the right solution for my problem.
View 1 RepliesNot too long ago I was given a new PC with windows 7 Professional on it. Before, I had vs 2008 running on win xp which worked OK. I started getting error msg (Unable to connect to ASP.NET development server) after I installed vs 2008 (version 9.0.30729.1 sp1 vs team system dev. edition) and ran one of my projects and even a simple test project. The first msg shows the syntax of webdev.webserver with an example in the bottom. I can get this error by running the project or by showing any page in the browser. I noticed that file WebDev.WebServer.EXE does not appear in the folder C:WindowsMicrosoft.NETFrameworkv3.5. If that's the only reason why I am having this problem than how can I fix it. I was told that .net framework 3.5 works on top of .net framework 2.0?! I just want to sort out this .net framework mess on my new machine. I am willing to uninstall all .net framework and start fresh. Another thing that I am willing to try is to get from a coworker the WebDev.WebServer.EXE (from the .net framework 3.5 folder) and see if it works.
View 2 Repliesi was working asp.net 3.5 (VS2008) . till yesterday My asp development server was working but today it is giving error " Unable to connect ASP.Net Development Server"
View 1 RepliesA reply to the following post says not:
[URL]
If it is possible, can anyone point me at an example?
I have a directory with sources of a web application (developed with visual studio 2008) without solution's files. Now I want to create a new web application in visual studio 2010, whit the existing sources.
View 2 RepliesI have installed a vs 2010 ulitimate . it's have Sql server 2008, but i want to Open SQL Server Management Studio 2008,
View 1 Replies