In my present project I have to open one site through my asp.net application and this site I have to control. And after that if we close the site the application master page should display. How I can accomplish the requirement .Any ideas will be very useful for me to start thinking on those lines.
View 3 Replies
I am using asp.net 2.0 with C#. I have deployed my application on IIS and while browsing it I am receiving below error:
Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot7179d944dd7c82aeApp_Web_adlogin.aspx.cdcab7d2.rqcxmj0e.dll'
I had deployed an asp.net 2.0 web site in IIS 7 in windows 7( with .net 4.0 installed ).
But while I am going to browse my starting page Welcome.aspx it shows error:
HTTP Error 404.0 - Not Found. The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
Is there any problem with deployment of the application?
I have two urls that are supposed to lead to the same actual folder.
I can't do a redirect because the websites are built so they question the URL and perform accordingly.
So I built two application in the IIS (I tried using a virtual directory for one of them, but I kept crashing on the web.config can not be read). Everything works perfectly except the Application variables which are different between the two addresses. (Specificly I'm counting the number of current users logged on).
We are implementing some business functionality that it exposed through the asp.net web service. At the current stage user interface is required for some peace of it and we are going to implement it inside of already existing desktop application (it is MFC C++ application, but we are considering to integrate some WinForms/Wpf components). In the nearest future we plan to replace current desktop application with a web site version (it will be asp.net web site, or PROBABLY Silverlight application). Therefore, I would like to implement UI once on the web site and just re-use it in some way from desktop application. Am I clear enough? Is there any way to do that? For sure, I can implement web service and use it from desktop application right now and re-use it from web application when it will be required... But I hope there is a better way to do that.
View 3 RepliesI have a scenario with three applications:
1) Portal: where user executes login
2) Site1: after login at "Portal" user is able to use Site1
3) Site2: after login at "Portal" user is able to use Site2
I just need to execute a validation in Site1 and Site2, to validate if they (users) did login at Portal1.
Something like (in site1 main page page_load).
{
if (notFromPortal)
{
//redirect to Denied.apx
}
}
How can I do this in a simple way? With cookies? Does somebody have a url with sample?
My security requirements are almost zero. I just wanna prevent that user put a url from Site2 in browser and see a Site2 page.
the account we use to copy/publish websites to our web server is not allowing us access to push websites. I've added this account to the permissions in the links listed in the below link, but i don't have success when trying to push remotely. When the account is in the local admins account, everything works flawlessly, but we are not allowed to have it in there. http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/31be047e-4716-4974-b8a1-be0111b50199 I've googled and searched a lot for this particular error, but am not finding an answer that helps. We get this error, 'Unable to create the Web 'http://edea01/test/planning'. You are not authorized to perform the current operation', and the above link is the scenario that matches mine the most. I don't do develompment work, but am asked to figure out this connection problem.
View 3 RepliesI need to know websites that produce free source code for famous web application
View 2 RepliesI have an ASP.NET page :
==========================
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="brent.aspx.vb" Inherits="FisEqSim_brent" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="[URL]
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
</div>
</form>
</body>
</html>
================================================
I have not add any .NET code yet. However when I try to browse to this page, I get a 404 error. I can browse to .HTM files fine, but .ASP file seem to lock up.
How to delete page history which you can see from the dropdown beside the browser back and forward button? I want to clear all the history on logout that is only specific to my website.
View 7 RepliesOK ... I want to make album ... I try to make it using buttons( next & pre ) using imageButton control and variable (i)
So ... each next (++i) & pre ( --i) to show allimages in directory ("photo")
Here my code in C# ::
[Code]....
Now ... It's working ... but the problem that I used server control (ImageButton) so all clients can affect in value of (i)
so (i) will be change in server ... what is the solution ?
I try to use the html control but i found it (difficult) ..
I've setup this <asp:FormView> to read from an XML file which I created, however I noted that although the .xml file has two <article> </article> tags, the data control (FormView) only displays the first item when enabling pages.Is this a bug or am I missing something out?Source code vailable here.NOTES 1. XML file is valid according to this page., although, I still have to find out an appropriate XSLT format
View 4 Replies automatically invoking below html code:
<html>
<head>
<title>Report Widget</title> [code]....
When this html code is saved as .html file and browsed, we get a file download dialog box. I wantt this to be automated instead of manually browsing in a web browser.
Is there a way to stop someone from looking into the App_Themes folder, by putting it into the url, like this:
http://localhost/myapp/app_themes/
same with app_data, can those be blocked, i didn't try app_data as i don't have anything in there, but just curious, as app_themes I was able to get into. Is this an IIS setting I need to adjust?
there any way where i can make a page only accessible through a RedirectToAction? It's a bit dumb of a question given a redirect writes a URL.. I know it might sound a bit silly, but i really don't like the fact i have to be 'forced' to create a partial view to be able to make the page i want to redirect to. What i want to do is quite simply, after deleting a user account, redirecting to a page where it says, account deleted (with a bunch of other stuff), so its quite a simple task. I have no problem making a partial view here and there, but if i want to make many pages unaccessible, i think i would have to make most of the website in partial views haha. Maybe i'm getting it wrong though, i've read a couple of posts about it, including Phil Haack's ->http://haacked.com/archive/2009/11/18/aspnetmvc2-render-action.aspx But i'm still very confused about this subject,
View 5 RepliesI would like, as administrator, list all users currently browsing the web-page (some id or something would be enough) then, what I need is to connect to that user and see what he is browsing. I have a class in my web-application, lets call it Node, in wich I store data what user is browsing. So which page he has clicked, so the next time he visit the same page, page is not rendered from db but from that Node. Is that even possible?
View 3 RepliesI am unable to browse a simple asp.net page from a remote PC through the IP address of that computer. However IIS is responding on a local computer with http://localhost and even when I type the local computer's IP address where the page is present. Computer is running XP and IIS 5.1. The message displayed on browser is "The server is taking too long to respond" however the page is just "Hello World" which displays local time.
View 4 RepliesI have a master page and inside : a music player.
<object type="application/x-shockwave-flash" data="[URL]"
width="200" height="20">
<param name="movie" value="[URL]" />
<param name="bgcolor" value="#ffffff" />
<param name="FlashVars" value="mp3=Preloader.mp3&loop=1&autoplay=1&autoload=1" />
</object>
It works and I can hear sound, but if I go to a different page, it stop (pause and return to start, I can still see it through and press play since its in my master page) How do I make it play while I'm browsing through pages? Note : The player contains a pause function and doesn't auto play so users wont be annoyed.
we can download other site css like right clikc their websites and we can see the css src / js src, then if we providee that filename in the address bar then it'll download, how to avoid this?
View 2 RepliesI have mysite online when I visit [URL] I get
[Code]....
How can I fix this?
I have win 7 with internet explorer 8. I have a Web application project in the VS2010, when I execute it using local port auto-asign port, the aspx page shows ok on the internet explorer. When I run the same project from the IIS (Browsing the aspx page from the iis), only the controls text is displays without the controls (colors and menus) - although the source view shows that the tags exists. Is it a problem with the IIS 7?
View 3 RepliesI've developed a file browser that will browser a different server shared folder. In order to get this working I'm using the unc path (\ServerSharedFolder) to return the files/folders. I've also added the following to my webconfig to get around the security <identity impersonate="true" userName="domainadmin"
password="password" />
It's simply a file browser, no create or delete functions will occur. The solution works and what I want to know is that this the safest way to do this? or the best way? I did try to use a virtual directory instead of unc path but asp.net would support this.
I had a powerbuilder application which i converted to web application in the format of ASP.Net (aspx) files.after deploying and publishing the converted web application (copy it and add ASP.Net and network Service AND IUser permissions to enable users to access it) in IIS V6.0 over Windows server 2003 and The ASP.Net version is 2.0
View 1 Replies[URL]
"Due to the organizational restructuring of the team that developed and supported the Mobile Device Browser file, we will no longer have the resources to support and update this CodePlex project. The team will be providing two more releases - one on the 27th July 2010 and the final release on the 24th August 2010. who used our product over the past year and a half. We would also like to thank everyone who contributed to the discussions and raised issues on our data."
Does this project live on someplace else or is there an equivelent project?
I have a website in IIS 6.0 using an application pool with a custom service account. when I browse the website, I get an error "service unavailable" and the error in event log says "The identity of application pool 'SampleAppPool' is invalid, so the World Wide Web Publishing Service can not create a worker process to serve the application pool. Therefore, the application pool has been disabled". I think the utility "Aspnet_regiis" can be used to grant access to an account to IIS metabase according to the article [URL but is that the right way to fix this issue? because this utility is used for multiple things and may do more than just granting the permissions to the account, or should I just add the account manually to "IIS_WPG" group?
View 2 Replies
