During pageload i would like capture, which event is raised and its ID .e.g button click event , textbox value change event. I have tried by using the below code in page load but always iam getting only balnk value.
Dim lsTarget As String
lsTarget = Request.Form("__EVENTTARGET").ToString
lsTarget = Request.Form("__EVENTARGS")
Using vb.net/asp.net 2005.
I have a page books.aspx that has a control named authors.ascx.
Inside the authors control there is a "select" button I want to add some kind of listener or event handler (not sure of the correct terminology) so on the parent page (books.aspx) I can respond to the "select" button being clicked.
I have to pass the authorID from the user control to the parent page.
In my authors.ascx control I just created this event:
[Code]....
Now I need to write the function for SelectAuthorBtnClick and I think add some kind of listener in the parent page to listen and handle the event.
i have an form with an button and some input controls. some time due to input problem i may get error after that if i refreshed the page then that time the button click event has fired, how to avoid this kind of bad event fire.
View 3 Repliesin my web form i have a department dropdown box, in its selectedIndexChanged event i have to fill the equipment dropdown box and in equiment dropdown selectedIndexChanged i have to fill out the other textboxs.
the depratment dropdown box get its value from sqldatasource.
[code]....
what i want is when i run the page, it shows the very first deparment in the list, and according to that it should pop up the values in the other fields, means it should show the values in the equipment dropdownbox and from that one it should pop up the values in the other textbox.
here is my selected indexchanged event for department dropdownbox
[Code]....
i am currently developing an asp.net project. there is a previous, next, and cancel button that the user can utilize, but the problem is that everything is broken into controls so that if they hit the browser's back button it will reset everything and take them to the very beginning. i would like to capture the onbeforeunload event and trigger the previous button click event (i.e. treating navigation like clicking the previous button).
View 6 RepliesHow do I create a new event in a base page class that fires after all derived pages have fired their load events but before any controls fire their load events.
The following code fires the event before the derived page's load event. I want it to fire the event after the derived page's load event but before all control load events:
Base Class:
Public Event FirstLoad(ByVal sender As Object, ByVal e As System.EventArgs)
Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not IsPostBack Then
RaiseEvent FirstLoad(sender, e)
End If
End Sub
Derived Class:
Private Sub Page_FirstLoad(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.FirstLoad
'Stuff here happens before controls load but only on first page loads'
End Sub
I have a update panel on the ASPX page,When thepage loads the content in the update panel shouldnot load ( Update panel should show the Updatepanel progress control) but after page load update panel contents should load . How do i get this efect.
View 3 RepliesI am using a third party gateway. The third party gateway does not support query-string , so i will need to post the form to pass the values to the given URL and another thing is that they don't expose the web-services so we need to use their page and that means we need to host it in an iframe in asp.net
so what i did is that i have hidden fields that will be used as parameters as depicted below
Code:
<input type="hidden" name="p1" value='4635' />
<input type="hidden" name="p2" value='Reference_test' />
<input type="hidden" name="p3" value='Purchase credits' />
[Code]..
Now the purpose of this , is to load the iframe after the page load event of the asp.net gets fired.
Now my problem here is that when the iframe loads , it does not pass the parameters to the url that is being set in the iframe.
I have attached the example, project. (2kb)
When you run the project you will notice when the iframe loads there is an Error
"NO VCS ID"
now this means that the parameters were not passed when the Iframe loads , i can understand because it seems like iframe does not do a full form post. so to demonstrate what i want, click the proceed button and you will notice it will give you a page with no errors and it will be a page where credit card details are required , i want to iframe to load that the first time.
now a days i'm working on my project. In project there is a aspx page which is binded with a masterpage, the problem is that when i run the project in debugging mode i found that page load event of a page is firing two times instead of one along with masterpage page's page load event. This is crreating a problem in filling a grid. I searched through the internet for this problem some says that it may happen if u have any image whose src="" or due to some bad HTML's on page .But i've gone through the page it does not contain any image whose src="" .
[code]....
I can't figure out why, but before my form is even displayed, the CheckChanged event fires. I don't even have a chance to check anything. Has anyone seen anything like this?
View 3 RepliesI have a user control that will basically be a header in most of my pages, but not all. I want some code in the user control to be run before the page load event of the page that holds the user control, but the page load event fires before the events in my user control. Is there a way around this?
View 3 RepliesUsually when we create an aspx page and then open the aspx.cs page we can see a protected void page_load().So my question is why that should be protected in default.Can we give other access modifiers.
View 1 RepliesI have a page called "EDIT.ASPX" on that page it has come TextBoxes, Label and 3 User Controls. When the Edit.aspx page is loaded all the correction form Controls are loaded properly, even the User Controls loads with no problem. The problem that I am expericing is that on the User Control I have a CHECKBOX with AutoPostBack="true". Each time the user click the CheckBox the User Control disappear. NOTE: How do I fix this problem and eliminate my page control from vanshing. The user control needs to keep the same state as the Edit.aspx page when the checkbox is clicked. I need to be able to click the checkbox without loosing any data on the page rather it's the Edit Page or the User Control.
View 5 RepliesI just discover why some validation is working bad on some of my forms: the button click event is being called before page load.
What I need for good is (I consider this is a normal cycle of events):
The user press a buttonSome validation occurs at client side (js function returns true if success)Some validation occurs at server sideThe page loads again showing the results
But this is what I get (BAD):
The user press a buttonSome validation occurs at client side (js function returns true if success)The page loads showing no results, because server validation hasnt happened yet Some validation occurs at server sideThe page doesn´t loads again and I cant see the results, so my client cant know what happened on the server side
This is how I tried to implement this:
[code]....
I have a page with in a master page. This page has a user control with a text box and a button. I also have another button on the page. As the page first loads the button_click event on both the controls does not fire when clicking the buttons. I also have an event on the enter key on the text box. This event fires which causes a post back. After post back now my button_click event fire. The button_click event does not fire on the first page_load.
View 2 RepliesI have Web page that uses LinkButton control inside Template Fields of Gridview.I am trying to work on LinkButton Click event and trying to preserve the Value of LinkButton that user click, and based on that value, i want to refresh tha page data.I used CommandName and CommandArgument property of Linkbutton, but i can use that property only in GridView_RowCommand method by checking e.CommandName expression. But the problem with that Gridview_RowCommand event fire after all other page_load activity. So the value never used in the page_load event to refresh the data in all other control.
View 5 RepliesI have a webpage which displays content drawn from a single record in a database table. I've been asked to change this so that the content displayed alternates between 2 records each time the page is requested by a browser (I guess this would equate to each PageLoad event).
The records to be displayed are chosen on the basis of two dates, a beginning date and and ending date, that define a time period in which the record is to be active. The table containing these records has 2 columns containing these dates (begin date is contained in "dtDisplay" and end date is "lastDisplay."
I'm not sure how to amend the existing code behind to make this happen. Here is the c# that I inherited from a developer who is no longer available.
[Code]....
I have a checkboxlist (cblTeamMates) with a sqldatasource (sqlTeamMates) that has 3 columns (ID, FullName and Status ). The datavaluefield and datatextfield for cblTeamMates is "FullName" and the 2 status values possible are "Available" and "Absent". How do I go about, in the page load event, checking all the names (FullName) whose Status is "Available"?
View 3 RepliesHow would you call a Javascript Function from CodeBehind on Page Load event without : Ajax (ScriptManager), Response.Write ?
View 2 Replies am using a master page, with children pages.
I am using forms authentication, and a session object to hold user information once the user is authenticated.
I am able to login and log out. I am able to log in and use the "remember me" functionality of the forms authentication.
When attempting to test the "remember me" functionality, the master page load event contains code to check the forms authentication & remember me, and retrieve user info from the database to automatically log the user in. This fires correctly, and the screens all load with the user successfuly logged in, and the users info is successfully stored in a session object.
Without touching anything on the screen, a moment passes and then the master page load event spontaneously fires again, Page.User.Identity.Name still contains the user name, however the session variable is now null, and throws an error.If I tell it to run past this error, it does, and the application continues to function normally, withthe session variables set correctly.
Its almost as if that second firing is ina different session, or something.
I have no problem posting code, but I have a profile class holding / handling the session communication, etc so it is a bit cumbersome.
I have an EDIT.ASPX page and on that page I have some labels and textboxes and a user control. I listed all the related codes you can have a clear picture - not all of the codes are given me a problem. ONLY ONE.
HELP ---> On the Uer control (SiteTemplate2.ascx) I have a DataList that is being populated by the database and that works fine. I have a
CHECKBOX on the user control page each time the user check the CHECKBOX the user control content totally disappears from the EDIT.ASPX page. There is no error message -- I believe this is a post back error but I don't know how to fix it.
Goal: Each time the checkbox called (CHKBSideBar) is clicked on the user control page all of the page content should stay in place that include
EDIT.ASPX Page and the refeneced USER CONTROL. I should be implement a CheckedChanged Function without either of the pages lossing DATA. I need to be able to access post back event from the user control of the Edit.aspx page. When the user click a box on the user control page how do I keep the same Page_Load event on the edit page. I need to reference the Edit page from the user control.
Note: The edit page loads the user control (SiteTemplate2.ascx)SEE CODES BELOW
I know this is a lot and thank you in advanced for your help. I tried to include all the pages that are key players. I must user the user control bacuase the user can select different template so eliminating the user control is not an option.
'*******************************************************************
The user control is being referenced from the web.config file ** Works find! **
[Code]....
EDIT.ASPX Page **-- WORKS FINE!** [Code]....
Can not fire Grid View RowEditing event in page load?
I have a grid view , select the grid line item from popup when click the image button which is located in header template. When click the select button in popup window , fill up the grid row and allow to edit the quantity text box.
In page load
If Page.Request.Params("__EVENTTARGET") = "ctl00_popupField" Then
AddHandler grdDOLineItem.RowEditing, AddressOf grdDOLineItem_RowEditing
End If
Protected Sub grdDOLineItem_RowEditing(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewEditEventArgs)
'bind the grid view row
End Sub
I want to download a file from database using asp.net c# code in page load event.My table design as below
Table Name: tblFiledownload
Id - int
Data - varbinary(MAX)
FileName - varchar(50)
FileExtension - varchar(50)
i am loading a usercontrols dymaically, i need to create a event listener so any controls that i load will pass back a int id to my aspx page. what is the best way to create a dynamic listener?
Control FeaturedProductUserControl = LoadControl("FeaturedProduct.ascx");
Controls.Add(FeaturedProductUserControl);
PlaceHolderLeftMenu.Controls.Add(FeaturedProductUserControl);
I am using asp.net treeview control. when ever user clicks any node,i want to perfrom some operations.
currently i am using the OnSelectedNodeChanged event.
but if user clicks on the same node which is already selected then OnSelectedNodeChanged is not getting called ( obviously it wont).
but i want to handle this case also. i want to do some tasks in server side even if he clicks on already selected node.