Web Forms :: Changing Data On Master Page After Postback?
Jul 24, 2010
Let me set this up:I have a master page. I have a regular aspx page - this page contains a Menu and a User Control.When I click on the Menu Item, it fires my click event. This will post back. The Master Page Uses Placeholder Controls where I dynamicaly create Label Controls with information and add them to the Placeholders. These contain data with tooltips. This works great. After the Master Page and Web Page load, it will then fire the Click Event from the Menu.The problem:The Click event will update data in the database, This data may effect the values that are created on the Master Page that are placed in the Placeholder controls. I can't seem to figure out how to change that data.
What I have tried:I have created a reference to my Master Page on my Web Page. In the Click Event after I have made changes to the Database, I call the function on the master page that Creates all the data and places them in the place holders. It Runs, but nothing changes on my page.Am I going about this wrong? Is there another way of doing this? I terrible work around, would be to just reload the whole page after I do an update.
View 6 Replies
Similar Messages:
Dec 23, 2010
Following is the structure of the pages in application
[Code]....
Suppose the user is on ..../paycheck.aspx which is the content page. But when ...../paycheck.aspx loads, "lnkDynamic" properties "Text and PostBackUrl" must be set. Which events should be handled .....
View 3 Replies
Aug 19, 2010
I'm working on a project that have 3 diffrent type of users with 3 diffrent master pages. I can verfiy there access level and let them view pages but after googling I came accross a tutorial form asp.net but it wasn't very helpfull the code I got listed below works only if the session is at null, It dosen't seem to pull the session value.
[Code]....
there is a class page attached to it but nothing seems to work. I've downloaded the tutorial but it wasn't any clearer than what I read.
I 'm just trying not to have to code over the joint pages.
View 3 Replies
May 27, 2010
I am using a master page where i have couple of links. I am using a css for maintaing the styles for the links.I have written a function in javascript to apply a different class dynamically in the "onclick" event.when i click on the link, untill the page postbacks the new style is applied but after the post back the hyperlink style is changed back to the original color.
View 7 Replies
Oct 15, 2010
When an asynchronous postback happened inside update panel, another postback happens also for MasterPage not only update panel embedded page .
I want to prevent this MasterPage postback .
is this possible ? think like i have a MasterPage
and another page which is test.aspx which is content page of MasterPage
i have update panel at test.aspx
when asynchronous postback happens at this test.aspx update panel it also loads MasterPage Page_Load
i want to prevent this (it should not also load MasterPage Page_Load)
View 2 Replies
Oct 15, 2010
When an asynchronous postback happened inside update panel, another postback happens also for MasterPagenot only update panel embedded page .I want to prevent this MasterPage postback . is this possible ?think like i have a MasterPage and another page which is test.aspx which is content page of MasterPagei have update panel at test.aspxwhen asynchronous postback happens at this test.aspx update panel it also loads
MasterPage Page_Loadi want to prevent this (it should not also load MasterPage Page_Load)
View 3 Replies
Dec 15, 2013
some code thats for bind to the database  is working correctly ,but master-content page that same  code does not work correctly.
View 1 Replies
Apr 4, 2010
I am tring to send form values to a page from a user control. I included the user control in a master page.When i use page.previouspage it can not get value. is there any way to send form data to a page from a user control included in a master page?
View 5 Replies
Dec 21, 2010
My Master Page has a heading with tabs. The code looks something like:
<CT:Tab ID="tabHome" runat="server" Url="/index.aspx" Text = "Home" Highlight="true" />
<CT:Tab ID="tabFun" runat="server" Url="/fun.html" Text = "Fun"/>
<CT:Tab ID="tabBlog" runat="server" Url="/blog" Text = "Blog"/>
I can think of two ways to control which tab is highlighted from within a user control:Have the user control implement an interface. The master page can decide which tab to highlight based on which interface is implemented, or based on a method in the interface that returns a string.In the Page_Load (or Page_Init) function, tell the master page (via FindControl or via a function in the Master Page) which control to highlight.I don't really like either of these solutions. Is there a clean way I could control which tab is highlighted from the control at design time (i.e., in the aspx file)?
View 1 Replies
Aug 9, 2010
I have a survey, where you have to click through several pages with questions. I use a "Next" and a "Previous" button for doing this. I use a session for keeping tabs on my position. However, this is a problem.
I use the button_click event to increment the page counter, but since this fires after the page_load event, nothing happens on the first click, and for every click thereafter everything is one page behind because the questions are rendered before the counter is incremented.
Is there any way to solve this without using the query-string?
Comment response 10:15:
My understanding is that the following happens:
The first page loads and the counter is not set. The counter is set to 1. The first page is displayed. The user clicks the "Next" button, firing a postback. The page loads, displaying the same set of questions, because the counter is still on 1. The buttons Click-event is run, incrementing the counter. However, the page is still displaying the old questions.
After this everything is one page behind because the questions are rendered before the click-event is fired, incrementing the page counter.
View 3 Replies
Oct 25, 2010
In my user control I got this inline CSS in which I have only css classes... like I am not setting any attribute or whatever on some ID..got only classes like :-
.sp
{
backgrond-image :url(blah blah);
}
and so on..
nothing of the sort
#id1
{
/* set some property here*/
}
Now my question:-
Do I need to worry about system generated IDs if the CSS in my user control got only classes ? like in my page source..the divs ID changes from their original ID to something like ctl00_ContentPlaceHolder2_ctl00_Banner_divBanner after adding usercontrol and master page ...
so changing IDs shouldn't make any difference..right ??
View 1 Replies
Nov 8, 2010
I m having Gridview in Update Panel. If I select page 2, I want to update few contents in the same page. I m using Update panel for those contents.
<tr><td colspan="2" align="center">
<asp:UpdatePanel runat="server" ID="UpdatePanel3" UpdateMode="Conditional">
<Triggers><asp:AsyncPostBackTrigger ControlID="GridView1" EventName="---" /></Triggers>
<ContentTemplate>
<div style="border:1px solid #000; width:300px; height:35px;" runat="server" id="divSelectedRecords">
</div></ContentTemplate>
</asp:UpdatePanel></td>
</tr>
What event Name I have to give in Trigger?
View 3 Replies
Feb 2, 2011
I have a Menu control in my master page, which I dynamicly add items to in each content page:
[Code]....
how can I call the method if it's in the content page?
I thought about saving in the ViewState something that will mark it was clicked, but the MenuItemClicked event is fired after Page_Load event is fired.
View 2 Replies
Dec 29, 2010
I have a master page which contains a treeview and a linkbutton. i have used 3 different stylesheets for the same page and those are listed in dropdownlist on the same master page. on dropdownlist change() event stylesheet of the master page change, i have 1 default style sheet which will come as master page loads.
now the problem is when i changed stylesheet from dropdown list, stylesheet changes the master page , but after that when if i clicked on treeview or linkbutton the stylesheet is restored to default one.
i have written following code
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
View 2 Replies
Aug 6, 2013
I have two dropdownlists on my page that are related to one another, and are built dynamically. I did not write the original code, but I believe it is using AJAX so the whole page doesn't postback when the ddl selection changes. The first ddl is Status and the second is ContractType. Here is the code for the event handler:
Code:
protected void Status_SelectedIndexChanged(object sender, EventArgs e)
{
try
{
DropDownList status = (DropDownList)sender;
string selectedStatusId = status.SelectedItem.Value;
[Code] ....
Here is some of my debugging info:
? view.Count
4
? view.Table.Rows.Count
20
? contractTypeDropDown.SelectedValue
[Code] .....
I commented out the event handler since this snapshot, just to see what would happen, but when I was hitting it you can see what ex.Message was. I don't understand why it says the SelectedValue is invalid when I see the selected value is "E " and that is one of the four items in the ddl.
View 1 Replies
Aug 30, 2010
Here is the thing. I have an aspx page with NO master page. I have two resource files with the same name (and specifying the language) in the App_LocalResources folder. If I do something like text="<%$ Resources:lblUser %> works fine. What I do to test it is change the browser's selected language.
But, if I do the same in a MasterPage or in a Page that is inside a MasterPage... when changing the Browser's language and refreshing... I'm still getting the default language...
I've been reading some threads about this but the situation was a little bit different.
View 16 Replies
Sep 21, 2010
I have a below Page title in my master page
<title>My Test Application Name®</title>
It renders Fine with Register symbol after the text "My Test Application Name" on start of the page but on any postback the title turn into My Test Application Name® Kindly let me know what can i do with minimal effort to fix this issue
View 1 Replies
Sep 22, 2010
I'm at my wits end on this one looked/Searched/Played/Experimented and I need your help if you can.This page is going to be primarily used on a mobile device using Win Mobile 5 Need to Accomplish:Prevent Postback(serverside) of Page using JavaScript (Postback's slow down the page on mobile device)
[code]...
View 1 Replies
Apr 12, 2010
What i am trying to do here is to show a couple of validation messages in form of a bulletlist, so i have a Div on my master page containing a asp:bulletlist. Like this:
<div>
<asp:BulletedList ID="blstValidationErrorMessage" runat="server" BulletStyle="Disc">
</asp:BulletedList>
</div>
When i then click the Save button from any of my pages (inside the main contentPlaceHolder) i create a list of messages and give this list as datasouce like this:
blstValidationErrorMessage.DataSource = validationMessageCollection;
blstValidationErrorMessage.DataBind();
The save button is located inside an updatepanel:
asp:UpdatePanel runat="server" ID="UpdatePanel" ChildrenAsTriggers="true" UpdateMode="Conditional">
Nothing happens, i can see that the datasource of the bulletlist contains X items, the problems must arise because the Save button is inside an update panel and the elements outside this updatepanel (master page controls for example) is not refreshed.
So my question is, how do i make the bulletlist refresh after the postback?
View 3 Replies
May 18, 2010
I am building a website in which all of the site layout is in Master page and the content of the site is in the inherited pages. I have various links for navigation in which i simple use Response.Redirect to transfer to different pages. Now the problem is that I want to put the content place holder inside Ajax Update panel so that the postbacks are Asynchronous and I want to show the postback by an animated image inside Update Panel progress control. The problem is that I am unable to achieve this result and the entire page is posted back and rendered again. I have placed the content place holder inside the Ajax control toolkit's Update panel but it does not work. Is there any way that I can change the content of the content place holder to a new page with asynchronous postback.
[URL]
I have same problem, can anyone write a code project exemple
View 4 Replies
Aug 29, 2012
working on .net 2.0 using (vb)
I have used Session.SessionID property, but it's keep on changing on every page postback.....can we keep it same untill user sign out from his account..?
View 1 Replies
Jun 18, 2010
I have a page NewUserLogin.aspx wherein I want to store the new password in a sqldatasourcecontrol, the code goes like this
<asp:Content ID="Content1" runat="server" ContentPlaceHolderID="ContentPlaceHolder2">
<div>
<table cellpadding="3" cellspacing="3" style="width: 100%">
[code]...
View 4 Replies
Jan 5, 2011
My Project is a normal web site, not a Web Project, and I am using VS 2005.
I am trying to define common Master Page Type in app_code which has an area to display error messages and the like. Very simple.
I added the following in app_code:
[Code]....
Also, I added the following in Master Page Source Declaration:
[Code]....
Also, I added the controls tblrowErrMsg and lblErrMsg as server controls to the Master Page.
Why I am doing this ?
This will allow me to display error messages from nearly any where inside the code in code-behined, app_code, and other core Class Projects (DLL).
View 4 Replies
Jul 30, 2010
I have an "Edit" page that uses a FormView bound to an EntityDataSource. The page is called with the ID field of the record to edit in the query string: "EditEmployee.aspx?ID=10". The EDS the FormView is bound to is using: AutoGenerateWhereClause=true and a QueryStringParameter. Below the FormView I have a ListView that contains some child records of the FormView. The ListView is bound to a seperate EDS and also uses the (same) QueryStringParameter.
The problem I am having is when this ListView attempts to Insert or Edt a column I receive an error because I don't have the ID field (EmployeeID) of the parent bound anywhere in the ListView (and obviously, it is setup as a ForeignKey so it fails, like it should). Any advice on the best way to get this ID (EmployeeID) column bound in the ListView? There are many things I can do in code behind, but I would like to solve this in the markup if possible. I can move the ListView so that it is inside of the FormView if necessary.
View 1 Replies
Jun 4, 2010
I created my page with asp dropdown. On selected index changed I am seeing postback operation on dropdown. I couldn't avoid postback operation of asp dropdown with updatepanel also.
IS there a another way to avoid dropdownpostback operation.
[Code]....
</contenttemplate>
</asp:updatepanel>
View 10 Replies
