I have a submit button which fires some code, the problem is I always have to click the button twice before it fires?
I have a number of dropdowns on my page, a number of other buttons all with unique id's, a postback is always caused on the page before the the submit button is clicked.
Here's some of my code:
[Code]....
I dont know what happened but none of my buttons or linkbuttons causes a postback anymore. I have dragged a few updatepannels on the page but the linkbutton concerned is not enclosed within an update pannel. when I click it there is just no postback happening anymore. I set the debugger at Page_load but...its not reached. I used firebug to analyse the http requests. there is none. its like those are not considered buttons anymore.
View 5 RepliesI have the following problem. I have a user control with its own events and procedures. I added this control to a page programmatically. It appears as it should but when you click a button on the user control. the control disappears from the page.
View 6 RepliesI have a LinkButton which fires an OnClick event to update some Labels; however, after the first firing of OnClick, it won't fire again when I click another (or the same) LinkButton which runs the same OnClick event. (It's a list of people, each a LinkButton, and clicking on one brings up their details)
If I leave the page a few minutes, it will work again, almost as if whatever was preventing OnClick firing timed-out. Of course, this won't be any use to the users!
This is my ASP.NET code for the LinkButtons (encapsulated in a DataList):
[Code]....
All the connections work, the data is retrieved, etc, so everything except the OnClick firing works. I've done a search of the internet and the forum, and found this seems to have been a long-standing problem since the first ASP.NET, but there is no solution for ASP.NET 3.5. Does anyone know what causes this, or where I might be going wrong?
OK, been burning up Google and Bing trying to figure out a good solution to this problem, and so far, I feel like I've taken a dive down a rabbit hole - I'm just waiting on the Queen of Hearts and the Mad Hatter to show up. Alice is kinda cute, but unfortunately, she didn't have any good suggestions, either.
Here's the scenario - I have a User Control on a Child Page that has a Master Page assigned. The control is for logging in to the system, so it contains two text boxes, a couple of links to password recovery and registration, and an ImageButton to handle submission of the username/password entered in the text boxes.
Everything works just as expected when the user actually takes the mouse and clicks on the ImageButton control.
Things don't work so well when the user enters a username and password and then presses the Enter/Return key.
While debugging, VS2005 (I know...ugh!) will stop at the LoginButtonClick event, and seems to run the code. Of course, the .Text property of the two input controls was empty, but the Request.Form collection had the values burried within the collection of Keys.
So, a little bit of digging got me to the point where they can login using either the Enter key or clicking on the ImageButton. So, everything seems like it's good, right? Nope, not so fast.
When I enter a username/password combo that's designed to fail authentication, the code will step through setting the error message, etc, but that information never makes it to the point where it's visible to the user.
I'm not seeing any extra postbacks (obvious ones, anyway), but for some reason, when the page goes to redraw when it's in a "failed" state, the notations just simply aren't there.
Below is the code in the User Control that handles the actual authentication routine. All controls, such as the Label with ID "message", are local to the User Control, so I don't think it's a FindControl("message") problem or something similar...just so bizarre that it disappears seeming without reason.
[Code]....
I have page on which I've a login control in which I've a subnit button. The problem is this that when I refresh the that page the submit button or any button that was clicked last before page refresh gets its click event automatically fired.
View 1 RepliesI have an aspx page that is wrapped with an UpdatePanel control, users can post comments and delete them later, when the user clicks the delete for the first time it deletes successfully but if he wants to delete another comment, it works only after two clicks on the button.the delete button is inside a web user control that is added dynamically at run time.
View 1 RepliesPrivate Sub control1 click event
& another protected sub control 2 click event
i need to call control1 click event in protected sub control 2 click event
I've found posts about making a click event with jQuery for a button, however I need a little more then that. When any postback occurs on a page, I need to fire off a jQuery click event. Based on a condition, I want to continue processing (including running the server-side event code after the jQuery code), or, perform a redirect. I'm not quite sure how to go about this.
View 1 RepliesI've been searching a little bit to try and find the answer to this problem. As of right now another person I work with has designed a wizard step with an upload button in part of it. After the person clicks the browse button and selects their file a validation statement comes up saying, "Please click 'upload and continue' or clear the field" and then is supposed to disable the continue button until this is done. He started by adding a RegularExpressionValidator and found it did not solve his problem.
Now that he's out today we're working on trying to solve this and my first though is to actually use a custom validator instead and have it call a function in the back-code for validation which checks to see if the "Upload" click-event has happened. Is there an easy way of verifying whether or not a click-event has occurred. Basically my conditional is shown in the pseudo-code below...
[Code]....
I have to click twice on button control to fire an event.
View 6 RepliesI have an ASP.NET 3.5 web application. There is a Master page with lots of client script and some simple server side controls. I have a user control that has a modal popup extender inside an update panel and some client script as well. When I add this user control on the Master page inside a new update panel whose update mode is set to conditional, and I add a link button whose click will initiate a method of this user control, the Master page's behaviour changes in a strange manner. All the buttons and link buttons start to fire their Click even on the second click. Nothing happens on the first click. As soon as I remove this user control from the Master page, everything seems to get back to normal and Click event fires on first click as it should. I hope I have clearly mentioned the problem here. I have already spent quite a long time trying to find out the reason for this but of no use.
View 3 RepliesBackground: I am customizing an existing ASP .NET / C# application. It has it's own little "framework" and conventions for developers to follow when extending/customizing its functionality. I am currently extending some of it's administrative functionality, to which the framework provides a contract to enforce implementation of the GetAdministrationInterface() method, which returns System.Web.UI.Control. This method is called during the Page_Load() method of the page hosting the GUI interface.
Problem: I have three buttons in my GUI, each of which have been assigned an Event Handler. My administration GUI loads up perfectly fine, but clicking any of the buttons doesn't do what I expect them to do. However, when I click them a second time, the buttons work.
I placed breakpoints at the beginning of each event handler method and stepped through my code. On the first click, none of the event handlers were triggered. On the second click, they fired.
Example of Button Definition (within GetAdministrationInterface)
[Code]....
i am having 2 imagebuttons a gridview and a button. Now if i clicked on Image button i will show a grid. Now under button click i would like to capture which image button was clicked if 1st image button is clicked i would like to some values and if 2nd one is clicked i would like to show another
View 2 RepliesIn ASP.NET My button click event doesn`t work on first click. But it works on the second click only.
View 1 RepliesIn my user control I have gridview, and this grid is created programmatically, using Itemplate. In InstantiateIn methods I have this code.
Select Case _templateType
Case ListItemType.Header
Dim linkButton As New LinkButton [code]....
I want to wired up Click event to this LinkButton, and use this event in code behind.This is constructor of GridViewTemplate how implements ITemplate
Public Sub New(ByVal type As ListItemType, ByVal colname As String, Optional ByVal infoType As String = "")
'Stores the template type.
_templateType = type
'Stores the column na [code]....
and i have this call from user control:bfield.ItemTemplate = New GridViewTemplate(ListItemType.Item, dt.Columns(col).ColumnName, "label")
where is Dim bfield As TemplateField = New TemplateField()
I have an update panel which contains a number of controls. The update panel is triggered by the OnSelectedIndexChanged event of a dropdownlist called: ddlUSCitizenshipStatus. It works as expected when I selected a new item.
However, if I leave ddlUSCitizenshipStatus with the default value, and then click "submit" button on the page, the requiredfieldvalidators say there is an error on ddlUSCitizenshipStatus (which it should, as I never selected a value). So I then choose a value, the error message goes away on ddlUSCitizenshipStatus, however the updatepanel does not refresh. I've debugged this locally and the OnSelectedIndexChanged event for ddlUSCitizenshipStatus does not fire.
If I choose an item in the ddlUSCitizenshipStatus list a second time, the OnSelectedIndexChanged server event fires and the update panel refreshes and works as expected.The issue is, I have to select an item in ddlUSCitizenshipStatus twice, after failed validation, before the updatepanel it's sitting in updates.The submit button on the page looks like this:
[Code]....
If I remove my custom OnClientClick script, making the submit button look like this:
[Code]....
The dropdownlist, update panel, and reguiredfieldvalidator all work as expected. However, I need to run that custom "ValidatePage()" script when the button is clicked.Below is what my ValidatePage script looks like. I've been troubleshooting this for more hours than I can count.... I hope someone is able to help me. Please let me know if you can figure out why ddlUSCitizenshipStatus doesn't update the updatepanel until the second click after a failed validation.
[Code]....
I have a bit of a strange problem and wondering if anyone can help.I have an update panel that has a timer set as the AsyncPostBackTrigger.
In the repeater I have a few buttons which have on click events.The on click of these buttons does not appear to fire until the timer has ticked. My code is as follows:
[Code]....
i am currently developing an asp.net project. there is a previous, next, and cancel button that the user can utilize, but the problem is that everything is broken into controls so that if they hit the browser's back button it will reset everything and take them to the very beginning. i would like to capture the onbeforeunload event and trigger the previous button click event (i.e. treating navigation like clicking the previous button).
View 6 RepliesI got an event handler like this, in this event, i wanted to call another button click event. How can I do that?
[Code]....
if (ds.Tables[0].Rows.Count == 0)
i have an form with an button and some input controls. some time due to input problem i may get error after that if i refreshed the page then that time the button click event has fired, how to avoid this kind of bad event fire.
View 3 RepliesI have a textbox with autopostback=true and a button to save the data in the form. Functionality works fine when entering a value in the textbox, tabbing out of the textbox and clicking on the save button. But issue comes up when entering a value in the textbox and directly clicking on the save button without tabbing out of the text box. In the second scenario, only textchanged event fires and save click event dosen't fire. What I was expecting was after exection of textchanged event, save click event should also fire. But this is not happening.
View 5 RepliesI have a gridview called gvResults. In the gvResults_RowEditing event I add a row below the one selected. In that new row, which spans all columns, I insert a user-control. There are two buttons and some textboxes in the user control.
My problem is that when I click one of the user-control buttons it never gets to the button event handler, I think because the user control is not recreated on the page postback. How can I have the user-control events fire before the parent page events fire?
I tried using an update panel, but I still get the parent posting back before the user-control events.
I am updateing my gridview using button click event but at the fisrt time it does not get updated first time but its works second time i dont know why . Dol u know how to genterate two button click event for the same button.Records never get updated on first button click event but its works on second button click event.
View 1 RepliesI have one Button (Refresh Button), One ComboBox (containing DEV and UAT as its items) and a GridView on my asp page.
I am filling up my Grid with values from database on the ComboBox's 'TextChanged' event and Buttons's 'Click' event.
First time when page is loaded, there is no information in the grid, but when i choose DEV/UAT from the ComboBox 'TextChanged' event is fired, the grid is filled with the relevant data. That is what i want.
When i click the Refresh Button to refresh the data again, first comboBox's 'TextChanged' event and then 'btn_Click' event is fired.
I want then when a button id pressed only 'Click' event to be fired and not the ComboBox's 'TextChanged' event.