I'm looking to have my page in "Edit" mode all the time. to do this I have the following code in the page_load of my page:
[Code]....
This works in all scenarios `except` when I open the catalogue and select "close" instead of adding controls to the page. Selecting close sets the page back into "Display" mode. Is there a better way to do this?
Can a datalist be forced to start in edit mode for all records?
View 1 RepliesIs is possible to force Grid view edit mode without using object data source, I set EditIndex, but the Edit template is never shown till I change the binding to ObjectDataSource
View 2 RepliesI have a grid view with edit and save buttons when I click on edit it is letting me edit it and if I click on save it is lettingme save the data that I have edited.
The thing is after save is done it is showing the data in edit mode i.e <edit item template > mode I am still seeing the textboxes if I refresh the page then I am seeing it normally.
How can I stop the gridview to show edit mode after the save is done?
- I want to put multiple rows of a gridview into edit mode
- I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time :
[Code]....
I have a "report" the users can run it basically creates a simple gridview. In the gridview the user can click on a claim ID. The claim id is then passed via url querystring to a claim management page. The claim management page uses a listview to display the various claims and allow users to edit them. I want to use the claim id passed in the url to locate the listview row to open in edit mode, so the user can make changes / alterations to the claim.
View 4 RepliesHow do I change these hyperlinks to say something other then Edit and Cancel?
View 4 RepliesI have a page where I have a tab container and four tabs. the problem is on the first tab "manage quote request" I have a Gridview with the quote request general informatin listed and have a template field created with a link button to databind to the formview quote details. the porblem comes in when after I click on the select linkbutton. the Formview loads right. Then Whe I try to click on the edit linkbuttin in the form view I have to click it twice to change the mode to edit.
here is the page code:
[Code]....
Here is the Codebehind:
[Code]....
We are developing a web application that will be used exclusively on intranets. We are designing the site to work on IE8 and have come across an issue where IE7 mode (or compatibility mode) really screw everything around. Is there a way to force IE8 to display in IE8 mode and not allow the user to override this?I have tried using the following:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN">
<meta http-equiv="X-UA-Compatible" content="IE=8" >
Also note that all our users will be using IE8.
how we can open gridview in edit mode on page load.
View 1 RepliesI have a webform that contains a few textboxes with required field validators and a gridview. I'm trying to add an edit function to the gridview, but when I go to update the textbox validators fire. Is there someway to trap the edit event and disable the rfvs? Will 'Mark As Answer' for replies leading to a solution.
View 1 RepliesI have a Gridview that handles double clicks. On a double click, the selected row goes into Edit mode, which means in my case that edit controls (textboxes, checkboxes and dropdown lists) become visible, and display controls (labels) become invisible. On Page_Load the values in edit controls get saved. Now my question is this: how can I get out of the edit mode if I don't want to save? Can I e.g. handle Escape key? BTW, I use C#.
View 3 RepliesI have two InlineEditBox.NET controls in a template field inside a GridView. When displayed in the GridView, the first row is OK, but starting with the second row, the controls are automatically displayed in edit mode when the page loads, and I can't figure out why.
[Code]....
I am using a gridview to display data and want to implement Edit, Update and Cancel in the GridView. Edit and Cancel are working fine but on update the Gridview isn't exiting out of the edit mode. I am using the gridview inside an UpdatePanel.
[Code]....
Using VS 2010 Beta 2, VB, to make hidden panels visible during design time, I have the panels away from the main form and then use Javascript to position them during runtime. This works fine except that when I use a footer on the masterpage, the footer shows up at the bottom of the page as if the page is the complete length of the desing page, and not the page that is being viewed. For example, I might have a panel that is absolute positioned to be 2000px from the top. During design view, the panel is easy to see and edit, but the content page would then be a height of 2000px. Using a javacript function, I position the panel to be at 100 px from the top upon pageload. During runtime, the page is viewed normal, but if you look at the page, there is a scroll bar to the right since the page shows to be 200x height until the javascrip function postitions it correct for viewing. Using a master page, the footer then shows up after the content page, which is 2000px down. Any ideas of how to make this work without changing what I do for editing? I am sure there is a better trick to editing layers, but I haven' found it. For example in Autocad, you just make a layer (panel) visible or invisible while editing. I haven't figured out how to do that with VS.
View 4 RepliesThis is what i have using VS and VB: formview that is bound to a sqldatasource. In the formview i set up three panels and the visibilty is controlled by three buttons. I want to be able to click the edit link button and have the panel that is visible in readonly mode be the one visible in editmode
View 6 RepliesEven though I searched for a similar posting (and couldn't find it), I am certain that someone must have raised this question in the past.
I am relatively new to the .net world and I am using VS2010/SQL Server 2008. I can't seem to find the problem, but when I click on the "edit" button I get a postback but I get the ItemTemplate again.
[Code]....
How can I set a particular row into edit mode in code? Like when the Grid loads up I need the last row to be in Edit mode.
View 3 RepliesI have a gridview and a template column:
<asp:TemplateField HeaderText="Active">
<EditItemTemplate>
<asp:CheckBox ID="chkbxActive" runat="server" Checked ='<%# Bind("Active") %>' />
</EditItemTemplate>
<ItemTemplate>
<asp:Label ID="lblActive" runat="server" Text='<%# Bind("Active") %>'></asp:Label>
</ItemTemplate>
</asp:TemplateField>
The item "Active" is a bit from the database And for the RowDataBound:
Const HeavyCheckMark As Char = ChrW(&H2714)
For Each row As GridViewRow In gvProductCodes.Rows
If gvProductCodes.EditIndex = -1 Then
' Selects the text from the Label which is inside the GridView control
Dim lblActive As String = CType(row.FindControl("lblActive"), Label).Text
lblActive = lblActive.Replace("True", HeavyCheckMark)
lblActive = lblActive.Replace("False", "")
'Replaces the text in each Label control
CType(row.FindControl("lblActive"), Label).Text = lblActive
Else
Dim chkbx As CheckBox = CType(row.FindControl("chkbxActive"), CheckBox)
End If
The check mark works fine when not in edit mode. But when in edit mode, the row that is being edited works as expected. But the other rows now show True or False. I want them to have the const HeavyCheckMark in it instead.
I created a sample gridview. However, when I clicked edit mode in one of selected row, it will run away. I need to use the mouse scroll up and down to find that row. As well, once finished the edit (clicked update button), it will run away again. I also need to find the editted row by using the mouse. How do I fix the position?
Furthermore, I also want to fix the header. If I scroll down, the header row will be on the top where ever I scroll to.
I need to display data somewhat like this:
Student Name: John
Exam Grade
MidTerm1 A
MidTerm2 B
For this, I defined a class 'Student' that has the properties StudentName[String] and Exams [a list of ExamGrade objects which has the Exam and Grade properties]. And I am using nested listviews to display the data. Here is the markup for the ListViews:
[Code]....
And the StudentInfo class looks like this:
[Code]....
And Exam class has just two properties.
Now the issue is that I have to press the Edit button [link button] twicw to get the EditItemTemplate. Even then I would get the blank textboxes. So what should I do to make the EditItemTemplate appear on the first click and the TextBoxes to appear with the existing data?
I've got a DatalList control on a page that I intend on using for Editing Items. I've added a button control into the Item Template with CommandName="Edit", and when click the button on the item, the page Posts Back and continues to display the ItemTemplate for that item.
Here's what I've got...
[Code]....
Edit mode does not run all the times I have a gridview with custom edit (I have my own textboxes placed in the EditItemTemplate for updating). When the user clicks the Edit button, the gridview goes into edit mode with no problem. In RowDataBound handler, I have the following code which checks if the edit mode is in process then an additional function will be called.
[Code]....
The problem is, I noticed that RowState and function are NOT called every time the GridView goes into edit mode but it goes every other line!!! For simplicity, I have blocked the function and put direct code. I have also tried the Edit functionality provided by the GridView, and surprisingly, it is NOT working!! Notice that in both ways, the gridview is displayed in Edit mode and it does display the
Update Cancel buttons in my second try. It is working fine in all alternate rows! I hope it is clear.
My gridview was working just fine until I converted the Officer Report collum to a templatefield so I could have a multiline text box. Now when I go into edit mode and press update, it doesn't update. I don't know what I am missing here?
[Code]....
Here is the datasource information.
[Code]....
I have a dynamically built gridview in which every row in editing mode has 2 dropDownLists, i set autoPostBack property of first list to true in order to change the other list values according to the first, but upon postBack, the gridview is not in edit mode any more.
View 7 Replies