I am implementing the Tabs dynamically from serverside, loading usercontrols inside them (using AjaxToolkit).
Question is, If I click on one of the hyperlink inside one of the tabs, it should open a new tab dynamically to show the results. How can I achieve that?
I would like to know how can I change the themes and skins or (CSS) dynamically and what are the basic requirements for it. Is there any design structure must be same..? Following are my requirements. E.g. we have 3 themes. Theme1, Theme2 and Theme3. Designations are. Employee, Manager and Sen.Manager And I want to assign Theme1 to Employee and Theme2 to Manager and Theme3 to Sen.Manager. After Employee gets promoted to Manager the Theme2 must be assign to him. And when they login there Theme and skin must be change according to his designation. Hope you can understand.
View 5 RepliesIve got some custom code that im using to load user controls dynamically depending on the option a user selects from a menu control on the page.
I wanted to create an admin page that can be used to provide a one stop shop to complete all actions within an app im building, (like a template/iframe scenario that loads all selections in a screen on the right)
My code works, however when the user has completed an action sucesfully within one ascx, then selects another from the menu on the left, it wont load the new control, it comes up blank like it hasnt refreshed properly meaning that they have to close down the page and reopen it. (which is very annoying)
My codes below, can someone take a look and see if they can see whats wrong.
[Code]....
End Class
[Code]....
i want to be able to load user controls and populate them with data from a sql database at runtime based on a status field in my database but im struggling to do this.
my default page.aspx holds the user controls (acts like a container). at the moment i had referenced all the user controls to load up when the page was loaded so:
[Code]....
[Code]....
i then created a procedure which reads from the database the "status field". so if the status field is "pending" then i want the uc:GRLOLApproval control to show up but im not sure where to put this code or how to do it. i want to be abel to load the control at runtime and run this code. in my default.aspx.cs code i have done the following in the page load:
[Code]....
i tried to reference te user control in my default.aspx page by doing: protected GRLOLApproval GRLOLApp; but it wouldnt recognise it because it not been reference in the source file.how do i reference it so that i can read the data from my database and write to the fields in uc:Collectionrequest. (I have exposed the properties in the uc:CollectionRequest that i want to access btw) have been working on this for days now and just cant seem to load the user control or access any properties.
I have UserControl that has asp control(<asp:Button runat="server" ID="btn" />) and I want to render it.
I tried 1
[Code]....
It doesn't works because it says that each control that has runat="server" must be in Form.I also tried 2:Because loader.Form is null, I create HtmlForm and added the ctrl to it and then added HtmlForm to loader's Control, BUT it says that it has 2 HtmlForm. So, instead I "injected" HtmlForm to loader like this
[Code]....
Now no error is occurred, BUT StringWriter is empty. don't tell me to add Page to solution and override OnRender. I want to do it as I mentioned above.
I was looking through my transcender exam kit for 70-562 and they say load dynamically created controls in the loadviewstateEvent. This should be CreateChildControls() instead, no?
View 1 RepliesWhen it comes to the usercontrol specially when they are loaded dynamically on the basis of certain conditions then it becomes a very confusing work. I have read in many forums that the dynamic controls have to be loaded in OnpreInit or OnInit. Some of those links are[URL] But this is useful only when if the we know that we have to load UserControl1, UserControl2 without considering any conditions. But what if I have a Tab control and for each Tab Click I have to load the UserControl dynamically. In that situation how can we add the control in either OnPreInit or OnInit. If I am not mistaken then in such case, then we can add usercontrol in certain events. If we are using a TabControl then we load in Tab_Click , if we are using Menu Control then we use Menu_Click and depending
upon the particular tab or Menu we load associated usercontrols. Hence in these conditions, how can we go with the logic mentioned by above links. I have this confusion for very long time . I am posting little portion of my project here. I am using RadTabControl but it doesnt matter if it is Microsoft TabControl. In the aspx, I have a code to define RadTabControl.
<telerik:RadTabStrip
ID="tabMemberDetails"
runat="server"
Skin="WebBlue"
MultiPageID="tabDetails" SelectedIndex="0"
Align="Justify"
ClickSelectedTab="true"
EnableViewState="false"
ReorderTabsOnSelect="true"
Width="1139px"
OnTabClick="tabMemberDetails_Click" ScrollChildren="true">
</telerik:RadTabStrip>
In the code behind, I am loading usercontrol on the basis of the particular TabClick. tabMeberDetails_Click fires whenever I click on the tabs.ViewState["ControlName"] stores UserControlName on the basis of certain condition and finally i load the usercontrol.
proteced void tabMemberDetails_Click(object sender,
RadTabStripEventArgs e)
{
Conditions......
{
ViewState["ControlName"]=........
}
viewDef=ViewState["ControlName"]
UserControl control = (UserControl)LoadControl("~/Controls/"
+ viewDef + ".ascx");
after this I add control to the RadTabStrip.................. and call bind method.........
}
As you can see from above, I am loading my usercontrol in tabMemberDetails_Click event. I see no other choice to do it in OnPreInit. Can anyone answer if this is the right way to do or there is another way that complies with the logic in the links given above.
I have this user control :
[Code]....
and i load it dynamicly in Default.aspx like this :
[Code]....
How can I pass the title value ?
how to load user control dynamically on asp.net page? I am loading user control in my page_Init() event under if(!IsPostBack) but when user post the with any button click then my user control is disapper?
If i am loading control without if(!IsPostBAck) then its fine, but each time a page is posted loading of control is not good because it will slow my web site?
I want to know how can I load my files (file1.aspx and file1.aspx.vb) in a container on my index.aspx. My index should have my menu and my container. My problem is that i don't know how do that... options wich i tried:
Iframes: yes work it... but in html 5 iframe will dissapear...
MasterPage: isn't the solution because this refresh all index page.
Ajax: yes.. charge my File1.aspx in the container but i can't call the functions of File1.aspx.vb..
I have quite a simple requirement, but strangely can't seem to find anything relevant & I'm not able to currently get it to work. I have created a master page with a a page header and footer, and left two contentplaceholders in it, one to add to the <head> html tag and one in the <body>. The idea is that users can then easily change the content or title of a page in a table without having to open an IDE of any kind.
The result is my page template looks like this:
[Code]....
Basically, I want the user to be able to paste all of their HTML into a DB table, and I will pull it out and put it into these placeholders. Most methods I've seen involve using extra controls, but surely there is a way to just enter text (that will be html) between the <asp:Content></asp:Content> tags on the Page_Load event?
I have been looking for the last day since some who was nice enough to suggest I change the look of my web application theme by haveing different css sheets. I have found many references to
<link runat="server" rel="stylesheet" id="cssIE" type="text/css" />
cssIE.Href = "CSS/StyleSheet1.css"
the thing I want to do is
cssIE.Href = "CSS/" & stylesheet_name
where stylesheet_name is a value from a database entery
The css file has loaded into the app fine and I know the value of stylesheet_name does return what I want because I sent it to a label control and the file name comes up.
Can we change master page dynamically in ASP.NET ... If yes How?
View 1 RepliesI have a table thats created dynamically, the table gets its contents from a custom class I've created that gets statistical data from a database. As the table is generated dynamically, I've put the contents class (the table data) into a session object and I populate the table initially inside a !IsPostback then on the page init I get the data from the session (its empty on the firts page load). I am now getting this error: Multiple controls with the same ID 'controlnamehere' were found. FindControl requires that controls have unique IDs. How can I avoid this?
View 4 RepliesI am using 5 ,6 user control. I wanted to load diffrent user control on Click of menu bar. Means when I click on first link of Menubar 1 user control should load and 2 loaded when i Click on 2 link of menu bar. How to do that?
View 3 Replieshow to improve the performance of dynamically load user control
View 1 RepliesDo you think it is wise to load the background-body image dynamically in a CMS application from SQL Server 2005? Granted I would have to generate a sql statement based on size of the page to show the correct image. Anyone run into any pitfalls?
View 1 RepliesHow to load UserControl at runtime and invoke the methods present in that usercontrol dynamically( at runtime)?
View 4 RepliesI want to use same functionality in Ajax:Accordion. Looking for the code for this as well as instead of label in user control i want to bind the grid view.
View 1 RepliesI have a tab control on my page and on click of tab user control is loaded dynamically.I need to load the javascript file of that user control dynamically. I don't want to add the reference of my js file on parent page.so in my .ascx page load event i added:
System.Web.UI.HtmlControls.HtmlGenericControl js = new System.Web.UI.HtmlControls.HtmlGenericControl("script");
js.Attributes["type"] = "text/javascript";
js.Attributes["src"] = "../../js/DatesJavaScript.js";
Page.Header.Controls.Add(js);
but it is not working.
Im working with asp.net web application,I need to get multiple gridviews dynamically based on the count (which i get from database) for that i took a web user control and i added a gridview there . iwant to load that usercontrol in aspx.cs based on the count..
but im able to bind only one grid view...
I have several usercontrols which are loaded based on business logic.However, all of them have webcontrols whose selected/entered value needs to be accessible in parent page on an event.Since there can be any combination of UserControls, I do not want to load all the UserControls in the Parent Page, since they are heavy.
I would like to load only those controls which are supposed to appear on the page, yet access the value from the usercontrol which caused the postback. (I would rather not access using Request.Form) (ViewState is open, but unsuccessful to store value in parent page's viewstate in onClick)Here is a sample scenario
Page: Home
Dynamically Loads: UserControls1
UserControls has TextBox tb and Button btn, causing onClick
When btn is clicked, I want to get value of tb in parent page on PostBack, Page creates UserControl2
Can any one let me know "How to load the dynamcially added HTML Controls(Controls added using javascript) during the postbacks without loosing their values?
View 1 RepliesI'm trying to write some code to use reflection to load new assemblies. I observed the file system with FileSystemWatcher, so that if anything in the folder changed, I can get notified and then reload them.
Firstly I have an assembly filters.dll loaded. Let's say its version is 1.0.0. Then when I have a new one v1.0.1, I paste it into the folder and replace the older one. Of course this fires "Change" event of FileSystemWatcher, and finally lead to assembly reloading.
Everything works fine, but I just want to know, what would happen to the firstly loaded assembly? Get replaced by the newer one? Or still somewhere in the memory?
I'm a bit new to .net so i was wondering if a thing like this is possible. I'm having one basic aspx script that needs to load some "plugins". Every plugin has its own settings and it should perform different logics. What i'd do in php is create a class for each plugin, load that class, pass the settings file to it and call some method on that class that would give me some output. But is it even possible in vb.net? I'd need to have multiple files with multiple classes, load those files, depending on the plugin name and call some method on them to parse that plugin's settings.
View 2 Replies