Web Forms :: .NET Bug In Event Linking Of Second Level Dynamic Controls?
Mar 17, 2011
I'll start by saying that it took me a very long time to find this bug, since it's quite elusive... The Repeater control in the following test case contains two runat="server" DIVs. Each one of them gets a TextBox appened to them through the ItemCreated event of the Repeater. Both of them have AutoPostBack=True, and TextChanged event wired to txt_TextChanged. However, only the TextBox from the first level properly points to the event on the postBack of the page. The second level TextBox also causes the postBack to occur, the its value does not persist in the VIEWSTATE as well as the event does not fire. Here's adirect link to the test case in a .zip file, as well as all the code. The project is built in VS2010 using Framework 4.
[Code]....
[Code]....
View 14 Replies
Similar Messages:
Jun 18, 2010
My users would like to select a radio button, click a button, and link to a web page. I need to know how to call the link using the C# code in the Button Click Event handler.
[Code]....
View 4 Replies
Oct 29, 2010
I need to create 2 level deep menu. The first level is static and horizontal. And i need the second dynamic level to be horizontal. Is there any oprion for dynamic menu item or it can be done by css somehow?
View 6 Replies
Nov 1, 2010
Inside VS2010 is there a way of auto generating page level event handler code?
View 2 Replies
Jul 15, 2010
Can anyone advise which page event is the perfectly right one to add dynamic controls? Justification too required why the stated one is better to others.
View 2 Replies
May 4, 2010
I have a fairly complex web app which has two levels of master page. The top level provides a nav bar constructed from a Menu control across the top of the page. Second level master pages provide menus down the side. It all works well.
On both Menu controls, I need to handle the MenuItemClick event. This works fine on the Menu controls on the second-level master pages. However, the Menu on the top level master does not raise the event at all.
This web site makes extensive use of Ajax and the top-level master page contains the ScriptManager. Before I go to all the work of creating a much simpler test site, why the Menu control is not raising the MenuItemClick event?
Here is the markup for the Menu in the top-level master:
[Code]....
Here is the MenuItemClick event handler:
[Code]....
The logging call in the event handler never gets called. Equivalent code in the Menu on the second-level master does get called.
View 2 Replies
Feb 5, 2010
In one of my ASP.NET webform application I want create dynamic controls and add Event handlers for those dynamic controls..For example when I click a button I want to display a list box and I want to add
SelectedIndexChanged event for that list box.I have errors in doing this... Here's the code I tried out... I think there are errors due to my lack of knowledge in postback
[Code]....
[Code]....
DLabel is a existing label control...*** When I click the button I get the ListBox... When I select the Item 1 the page reloads and nothing is displayed in the Label.
View 1 Replies
Jan 19, 2011
I have created radiobutton list dynamically in my app'n...can any one tell me how to handle the selectedindexchanged event for the dynamically created radiobuttonlist. I just want to capture the value of radiobuttonlist and store it in the database.
View 1 Replies
Apr 23, 2010
I have a page in which I am to add dynamic controls (labels, textboxes) at run time as per request(any number of controls can be added as per request, just for timebeing i have fixed it with value 3).
I have two button on my page "Submit" and "Cancel". which will be disable only when atleast one textbox is not null otherwise buttons should be disable.
[Code]....
Java Script code :
[Code]....
View 4 Replies
Oct 23, 2010
This event handler is not responding at all to the click event. On click, the pagination numbers disappear and I'm not able to trace it in the debugger because the event handle doesn't even fire so I have no idea what's going on.
[Code]....
View 2 Replies
Jan 12, 2011
I'm presenting a list of products within a ListView. Each product can have associated "Options" (Size, Colour etc), but may have none. For each product that gets added, I need to render a dropdownlist for each of its options. E.g. A "Colour" dropdown might have "Black", "White", "Red" etc. I need to generate these controls dynamically, as they are defined by the data itself.
So far, so good. The dropdowns are rendered, and everything "looks" good. The trouble is, I can't work out how to actually get it to work. .Net is complaining about "EnableEventValidation", and ViewState won't work as I've added the controls late in the page's life cycle. As these controls are dynamic, I don't know how to pick up the selected values, and persist them on a post back! When the user clicks on the "Add to basket" option for the product, I need to determine which options the user has selected, and add them to the basket.
Am I missing something here? Is there an easier way of achieving this? I kind-of feel like I'm in a "chicken and egg" situation here. I can't create the controls until the data is loaded (in the ItemDataBound event), but that too late for ViewState. Is there a generally accepted best approach for achieving this sort of thing in ASP/Net?
View 3 Replies
Aug 26, 2010
I am using Visual web developer 2008 Express. I have a menu with a static top level and a dynamic second level. When the dynamic level is displayed the background is always white. How do I set the background and foreground colors for the dynamic menulevel?
View 2 Replies
Dec 21, 2010
I am working on an ASP.NET web application using .net 4.0 and VS2010.
I have a GridView and I am appending a row at the bottom to allow users to input data for "Adding" a new record.
The ONLY way I have found for this to work is to do this in the RowDataBound event of the grid. I can check to see if it is about to process the footer row then I know I am at the bottom and can insert this new row.
The row I am inserting contains a couple of TextBoxes and a LinkButton for the "Add" link.
If I just drop a LinkButton on my form and hook up the click event and I click the link button then the first thing that fires is the Page_Load event then my click event. However what is happening when I click the link button that was dynamically added to the GridView is the Page_Load event fires but the click event never does.
I have read 1000 threads saying to try to create the controls in the preinit() or some other event. In my case I can't. Or else someone would have to explain how to add the row to the bottom of the databound GridView.
Here is my code: (I removed creating the Textboxes because that is not part of the problem.
[Code]....
View 10 Replies
Feb 1, 2010
I'm creating a GridView in code. I can successfully attach handlers for Editing, and CancelEditing. RowUpdating never runs, however. Instead, if the GridView is in a Panel, the Edit handler is called when Update is clicked (and this is the command name I get back on the Update click, too). If the GridView is not in a panel, then the Cancel handler is called when Update is clicked (again, this is the command name I get back from clicking Update). I've searched high and low for a reason why the RowUpdating event is not getting called, and I can't find one. Does anyone out there haveHere is my code (My actual code is much more involved than this, but for testing purposes, I extracted the following code and stuck it in a new project to isolate my problem):
protected void Page_Init(object sender, EventArgs e)
{
if (!IsPostBack)
[code]...
View 1 Replies
Jan 6, 2011
i am loading a usercontrols dymaically, i need to create a event listener so any controls that i load will pass back a int id to my aspx page. what is the best way to create a dynamic listener?
Control FeaturedProductUserControl = LoadControl("FeaturedProduct.ascx");
Controls.Add(FeaturedProductUserControl);
PlaceHolderLeftMenu.Controls.Add(FeaturedProductUserControl);
View 6 Replies
Jan 31, 2011
I have to handle error related to web application. I am not sure how its works. I am thinking that I will add an error page (error.aspx) and in global.asax ,application_onError, I will redirecting the user to error page and that should be enough ! i mean it will handle error automatically.
View 4 Replies
Sep 14, 2010
I have a need to add an application level event (like Application_Start) but not in global.asax. The reason that I can't use global.asax is because this is a web application for which I don't have source code but I want to add some functionality to it. I need to insert an application start code and was wondering it there was anyway to do it. I'm not sure that if I add a class or aspx page to the sie if it will dynamically compile since this is a web application.
View 8 Replies
Aug 4, 2010
I ask for a date, on OnTextChanged event i bind data with a SqlDataSource to a dropdownlist and also bind data to a repeater passing the dropdownlist SelectedIndex (i use SqlDataSource too and ControlParameter to link the dropdownlist and the repeater) On my repeater during the ItemDataBound event i create dynamic dropdownlist controls, my code is :
[Code]....
[Code]....
On the Page_load event of my page i bind the data & recreate the control :
[Code]....
Everything works fine, datas are bound and SelectedIndexes are restore on every postback.
The probem occurs when user change different dropdownlists, if he choose to change the 1st dropdownlist the event is fire (normal), after if he modifies another dropdownlist the event is fire twice, if he modifies a 3rd time the event is fire 3 time etc...
View 18 Replies
Oct 28, 2010
So I have a GridView control with autogenerated column set to true, it also has autogenerated Edit and Delete buttons, sorting and paging, and also I am binding this same gridview to multiple data sources at runtime. All is working well.
Now I am adding a dynamically generated footer row at runtime. This footer row will allow users to add new record regardless which data source it binds to. So it is working as well except there's a small bug I couldn't figure out why. It's when I navigate to the last page of the gridview, if the rows on the last page is less than the page size, for example, I have page size 10 and the rows in last page is 9, then when I click the 'Add' linkbutton, the Add event does not fire, instead, it fill the last page with additional blank rows, that means if the last page has 5 rows, it will fill 5 blank rows below, if it has 9 rows, it will fill 1 blank row below. Then if you click the add again, it will work. If the last page already has 10 rows then, it works just fine.
Below is the code I used to dynamically add footer row:
[Code]....
View 9 Replies
Mar 17, 2010
I'm having a hard time understanding why the following code doesn't work. I'm sure it's something remedial that I'm missing or not understanding. I currently have a page that asks for user input. If, based on the input and logged in user, I find data from this page already in the database, I need to update the existing records rather than creating new ones, so I set a class-level bool to true. The problem is, when MyNextButton is clicked, PreviouslySubmitted is still false. So, I'm not sure how to make the value of this variable persist.
public partial class MyForm : System.Web.UI.Page
{
private bool PreviouslySubmitted;
protected void Page_Load(object sender, EventArgs e)
{
MyButton.Click +=
(o, i) =>
{
q = from a in db.TableA
where (a.SomeField == SomeValue)
select a;
if(q.Any())
{
PreviouslySubmitted = true;
//populate the form's fields with values from database for user to revise
}
}
MyNextButton.Click +=
(o, i) =>
{
//the value of PreviouslySubmitted is false at this point,
//even if I made sure it was set to true the previous postback
if(PreviouslySubmitted)
{
//update database
}
else
{
//insert into database
}
}
View 2 Replies
Apr 29, 2010
I use SqlWebEventProvider to log the exceptions to sql server, and it works fine.
I also want to log custom exceptions to aspnet_WebEvent_Events table programmatically. Similar to - [URL]
WebBaseEvent.Raise(new WebErrorEvent("My Error message", null, 5000, e)); I get an error saying "Cannot access constructor 'WebErrorEvent' here due its protection level.
View 2 Replies
Jun 25, 2010
I have searched around but unable to find a solution that will work. I have a link button that is created dynamically during the page load. It is given an ID (obviously). There is a script manager on the page. I have the controls added to a panel in the updatepanel (updatePanel1). There is a dynamic label that is also created with each link button. I can get a response from the linkbutton click event during a postback on the second time clicking the linkbutton, but I am getting a complete postback instead of the asyncpostback for that control. During the creation of the dynamic linkbuttons, I am also creating a dynamic trigger for each button and adding it to the updatePanel1. The Click event is not firing the method without doing a complete page postback.
View 4 Replies
Jul 27, 2010
I have a horizontal menu control populated (in static mode: StaticDisplayLevels="1" MaximumDynamicDisplayLevels="0") from a site map.
I have another vertical menu control in the left toc of the page that I want to populate from the same sitemap but to be the children of the node selected in the first menu.
View 4 Replies
Feb 18, 2010
I'm trying to link a detailview to a gridview. Both are using the same datasource control and it's coming from an Access database. Both are showing data. The gridview is listing products fine and the detailview is listing details of some default product (maybe the first). How can I configure the two so that when I hit my select button on my gridview that it populates the details into detailview with the correct data for the selected product?
View 1 Replies
Jan 25, 2011
I have 2 DetailsView controls- dvPerson, dvVehicle - that are bound to datasets at RUN TIME. When a person is selected in dvPerson, dvVehicle should filter to show vehicle info only for that person.
View 7 Replies
