For Each i need <ns1:PricedItinerary> Node there exists a <formdata> node and i need to get that formdata node datas alone and append to my next request..
ASP.Net 2.0 Web Services automatically create both SOAP 1.1 and SOAP 1.2 bindings. Our web service, however, has SOAP extensions and custom exception handling that make the assumption that only the SOAP 1.1 binding is used (for example, the SOAP extension uses the HTTP SOAPAction header to control behavior).
I am looking to correct the code that makes these assumptions and make it work with either SOAP 1.1 or SOAP 1.2 properly. I am running into a bit of a problem in the generation of elements for our SOAP faults.
Consider the following web method implementation:
[Code]....
The SOAP 1.2 response now has the wrong qualified name for the detail element. It should be <soap:Detail>, but instead is merely <detail>, same as the SOAP 1.1 response.
It seems that the ASP.Net 2.0 framework has done quite a bit to transform a SOAPException into the appropriate form for the SOAP version, but neglected to properly handle the detail element. Additionally, they don't seem to have exposed the correct SOAP 1.2 qualified name for the detail element as was done with the SoapException.DetailElementName property.
So, what is the correct way to add a detail element to a SOAP fault response that works for both SOAP 1.1 and SOAP 1.2? Do I need to detect the SOAP version myself and hard-code the SOAP 1.2 qualified name for the detail element?
I am developing a web application which uses a third party Web service. It requires Username & Password in SOAP Header request. I am passing those credentials well and the web service returns an XML string in Response and also a SESSION ID in the SOAP Header.
I don't know how to read/access the soap header from the response sent from the web service.
I have a web service running somewhere... I have added a reference of the same in my project. I had used SOAP UI to check the outgoing and incoming SOAP messages.
Now what i need is to MODIFY the SOAP message after it has been created (I wont be creating the soap message manually,) modify as in, I mean to insert some element into the header (such as public key etc) and encrypt the contents present in the body.
I have tried a lot of googling and have come to conclusion that i may have to use the SoapExtension Class.But i just dont understand how to do it.
There are method like ProcessMessage(... which require SoapMessage as input parameter. Now how to read a generated SoapMessage is still unclear to me. I dont want to read the Soap message using tools (fiddler, soapui etc). I wish to read it programmatically.
Hope this is the right forum to ask. I am trying to write a simple mobile application with two form fields that POST to a webservice that queries an SQL database and comes back with an XML file that needs to be parsed and displayed properly in a browser.
So what I have is a webservice .asmx file that is working properly and an HTML form that POST two variables to the webservice file. The result is the generated XML. I simply just need to know the simplest way to display parts of that data as output within the design of the form page.
Here is the HTML form: http://www.bt4u.org/ And here is the web service: http://www.bt4u.org/BT4U/BT4U_WebService.asmx
If you enter in the following respectively you will see the XML file:
MSS-1607 HWD-2104
there is some sort of class that stores the XML in an array or some such thing that can then be manipulated
I am creating a web app in ASP.NET with VB code behind. I would like it so that a user can input a url ("[URL]") and then when the user presses the GO button, I want the system to interprete the [URL] page (without navigating to it), look in the HTML source, and store all data that is present within the URL's <p></p> tags...is this possible?
I have noticed a similar thing present on [URL]. When you submit an article to [URL], it automatically looks at the URL's <meta name="description" content="" /> in the URL HTML file. I would like to do a similar thing, but instead extract all text between all <p></p> tags.
I'm generating reports with a table, these reports are between some dates, the query is working, the thing is that the client does not want to have to type the date as for instance, reporte between 2010-10-01 and 2010-10-31. Since he only wants to get monthly reports, he wants to sleect just month and year. I created 2 dropdownlist one with month and another with year. I don't know if it is the best approach but what I want to do is that when the client seleces january 2010 automatically passes to 2 labels like this: 2010-01-01 and 2010-01-31 So then my query get these dates in the between fields.
Token A^*!%~Token B^*!%~Token C^*!%~Token D^*!%~Token E
Write a method that parses the string into a series of substrings where the delimiter between the substrings is ^*!%~ and then reassembles the strings and delimiters into a single new string where each of the substrings is in the reverse order from the original string. The method must return the final string. The expected output would be:
Token E^*!%~Token D^*!%~Token C^*!%~Token B^*!%~Token A
i need to parse remote website to get a perticular word. ineed to get a word which is in bold in the below example.And the word is changable and it van be int or char.
if I serialize C# automatic properties with soap serialization, generated xml contains ugly element namesfor City property it is <_x003C_City_x003E_k__BackingField id="ref-6">I know that it is because it doesn`t serialize property but generated variable that may have such name.
I have taken up a project at work that was left half finished by the last guy that used to work here, it involves choosing a country, region and town from some drop down lists this is all done in Javascript which leaves this as a problem for me so now I need to retrieve the value of the townID that is stored in a hidden value, I tried this by putting the townID value inside a session and then on postback (after clicking the button) I wanted to parse the session value to retrieve the correct article, but I receive the following error:
Value cannot be null. Parameter name: String Here is what I am doing with the code (on the button): [Code].... (Postback) [Code].... This is the code I am using, the TownID is coming out null!
i want to display these symbols in a textbox [URL] ok say i want to display a square root symbol I need to parse html command txt1.text=" html command square root symbol is " & √ 'this needs to be parsed
Documentation for using a checkbox with a gridview has the following statement:Because a check box can display only a selected or an unselected state, a CheckBoxField object can be bound only to a field with a Boolean data type or a string that can be parsed byParse.No example has yet been found to explain how using Parse to control the value of theis done. Interestingly enough I can find a fine example for the unlikely scenario of embedding a bulleted list in a grid cell.
This works. Now I have to submit a form via C# code.... DONE. It works. And my C# code saves the "new" HTML to a string variable called "submitParsedHTML". My question is: how to I change out the URL, to go through the string variable instead? I am thinking about doing this: When the user clicks the button to "Post" to the form and the app grabs the HTML. The app logs into my FTP account and saves the HTML as a seperate (temporary) file to be used on the internet [URL] Then the app can then parse the HTML as if it was a normal HTML document and not have to go through formatting the text to an HTML document. What do you all think?
In my project we are implementing Single Sign On functionality. The domain credentials will be received through the SAML file and we have to consume/Parse SAML response sent by SSO page using .Net. How to do this ?.Net 4.5 provides some classes to support SAML Response/token.
I want to create a link button with following code. However, this linkbutton doesnt work correctly: when I clicked it, it cannot go to the target url and will cause an exception.
Debugging the code, I found that the value of cid is not parsed to the url. Actually, this code <%#Eval("cid") %> is not recognized as a variable, the target url appears to be LearnPage.aspx?cid=<%# Eval("cid") %> instead of LearnPage.aspx?cid=VALUE.
I've trying to use the API for CapsuleCRM... [URL] I've been reading some articles on SOAP in asp.net and I just don't get it. Most of them seem to be ablut creating a web service, not using it and none of them seem to explain how to use basic HTTP authentication. I have got as far as constructing the XML i want to send to the API but I could really do with seeing some example code which makes an http call using http authentication to a SOAP API.
I can use the TextFieldParser Class to parse the text of a file in the file system (given the abslolute path) but it won't parse text from a file whose location is identified by a URI.
The question is not really about parsing the HTML, but rather parsing the HTML and adding elements to the DOM according to the HTML tags. For example - I want to be able to take an HTML page, add attribute to the HTML tags - such as "class='replace'", put some PHP/ASPNET code in the page (make an ASPX page with ASPNET or put some include with PHP) and make them parse the page every time it is accessed and manipulate the DOM of the tags marked as 'class="replace".
For example if I have < div class='replace'>< /div>, after I run the script I'll get something like < div class='replace'>This is a new text< /div>
Where I live the local transport service has this page where you can read about delays and disturbances in the traffic. I would like to parse this page so I can store this data and make a nice report of it.
The problem is that to be able to get the information you need to submit a form by making some choices and clicking a button. You can't just visit the page.
How can I get the information "behind" the form from code so that I can parse it?