This works:
[Code]....
If I open a command line on that server and type that command, it returns all of the scheduled tasks for the system. If I run that code, it returns a blank page.
[Code]....
Using above code, I got succeeded in printing PDF file through command line. But it runs the Acrobat Reader and opens Save dialog box.
In my case, I want to suppress Save dialog box and save the file on other location using c# coding. I mean I want to save a PDF file behind the scene.
i would like to do an automated test system which will allow me to run a batch file automatically. right now the procedure is:
[code]...
i would like to have a button so that once the user clicks it, the above processes are ran automatically.i have something done, which allows me to open up cmd.exe as shown below:protected void Button1_Click(object sender, EventArgs.
ave never used ajax.... I'm currently putting together a little web app that basically calls a program on the server itself (a command line tool) and displays the output to the web page.When the command line tool is run from the command line, it outputs status messages as it does it's thing... as it is now, my page just displays all the output when it's done. What I would like to do is show each line of output on the web page as they happen, just like when run from the command line. I'm guessing ajax is what I need... can anyone point me in the right direction for this specific scenario (user clicks button, output streams to web page as it happens without full page post backs)... a good example would be how ping.exe displays it's output on the command line
View 2 RepliesI want to use SDelete after some code is run on an asp.net page. SDelete is a command line tool. My specific question is has anyone been able to run this SDelete from an asp.net page? More generic question would be, how do you run a command line utility from an asp.net page?
View 1 RepliesI have a web page hosted on the server and a zip file on the server's file system. The page is spinning off the 7zip process with some arguments (location of the zip file and destination folder for unzipping) but it seems to raise permission issues, of course. For each file in the archive I get "Can not open file [filename]". I tried windows authentication and running the process with a username and password but nothing worked properly. What would be the best way for unzipping the file on the server from security point of view? Ideally, I would also like to have this event driven so the file is unzipped as soon as it arrives on the server (this is when I request the page).
View 1 RepliesI have a Perl script that calls aspnet_compiler.exe to compile a large ASP.NET website. The problem is that it takes very long to run. Is there any way to compile just a single .aspx file from the command line? (I think that would suit the needs of my script) It seems that all aspnet_compiler.exe can do is compile at a directory level.
View 2 RepliesI'm trying to execute a .bat file in my web page when a user clicks a button. The normal command I would run in the command window is as follows. abc.bat 1 Where 1 is project number which is dynamically assigned according to the scenario in the program. Also the .bat file is inside the folder D:Test1. My code looks like this.....
void CreateProjectData( string strProjectId)
{
System.Diagnostics.Process newProcess = new System.Diagnostics.Process();
newProcess.StartInfo.UseShellExecute = false;
newProcess.StartInfo.FileName = @"D:Test1abc.bat" ;
newProcess.StartInfo.Arguments = "abc.bat " +strProjectId;
newProcess.StartInfo.CreateNoWindow = true;
newProcess.StartInfo.RedirectStandardInput = true;
newProcess.Start();
newProcess.Close();
}
When I run the .bat file the data should be generated for project and stored in a database. When I run this in command line it works fine. But when I run the above code in the asp.net web page it executes without any errors but does not store any values in the database. Have I defined the project name, arguments correctly in the above scenario?
how can i compile command line through web application? my application is built on asp.net(C#)....
View 1 RepliesI am trying to zip files using command line Below is the code I am using.
Dim filePath As
String =
"C:Program FilesWinZipWINZP32.exe"
Dim outputfile
As
String =
"D:GeneratedReport25.zip"
Dim csvfile
As
String =
"D: est1"
Dim startInfo
As System.Diagnostics.ProcessStartInfo
startInfo = New System.Diagnostics.ProcessStartInfo(filePath,
"winzip32 -min -a " & outputfile &
" " & csvfile)
startInfo.UseShellExecute = False
startInfo.WindowStyle = Diagnostics.ProcessWindowStyle.Normal
startInfo.CreateNoWindow = False
System.Diagnostics.Process.Start(startInfo)
I am getting the Win32 Exception. (System cannot find the file specified.)
recently converted a project written with VS 2008 + asp.net 3.5.The problem is that on line on the production server (that's running asp.net 3.5) it can't render correctly on safari.The project has a BrowserFile.browser that with past visual studio worked:
[code]...
I have an ASP.NET application running under IIS. I'd like to be able to change one of the web.config values in Application Settings. I know it's possible to change it programmatically as described in this answer but I'm wondering if the same thing can be accomplished from the command line.
The IIS 7 Manager allows application settings and connection strings (among other options) to be changed. My hope is there is a way to do the same via the command line for IIS 6 and/or 7.
I need to use Notepad to make changes to an old .Net 1.1 app. I then would like to use the command line compiler. the syntax (and where I need to navigate to in my cmd) to compile the changes I make in the code behind pages into the DLL?
View 3 Replies Im looking to deploy a web application on a build server.
It is a very small web app and so far i have written a nice little console app that checks out from SVN and then calls msbuild on the .sln file.
This of course is not the same as publishing a web app and so far have not found a programatic way of publishing.
After msbuild has run can i simply delete all .cs and .vb files and then deploy?
or
Should i really try and find a way to publish programatically?
SqlCommand MyCommand1 = new SqlCommand("Insert into incoming_inventory(division_code,inv_date) select '"+dd_district.SelectedValue+"','+'" + DropDownList3.SelectedValue + "'+'/'+dayno+'/'+'2010' from month_day where month_name=datename(month,dateadd(month," + DropDownList3.SelectedValue +",0)-1)'", MyConnection1);
View 2 RepliesI am trying to figure out how to publish a web app from a command line if there isn't a solution file present. Is this possible? Is it possible to generate a solution file from the command line? I would need example of how this is accomplished.
View 2 RepliesWhat is the most equivalent method to get the command line arguments in web, asp.net, simmiliar to an executable file application?
View 1 RepliesI need to post a request to aspx page within dos command line.. How can I do that ?
View 3 RepliesIs there a recommended or good way to stream the output messages asynchonously to a web form so there's some indication of progress? A bit like TeamCity does for build scripts. Should I be polling a webservice? Using the OutputDataReceived event? Turning off buffering?
View 2 RepliesI've been doing this project at work on a little app that we use for building and deploying websites to different customers. It works quite well, and we actually only have to press two buttons to have our DataProviders and DataRecords generated from sql and having our dll's compiled and everything sent to the customers ftp as a zip file, ready to unpack and use.
Now the problem is that since I've upgraded to Windows 7 (was XP) our compiler (either csc.exe or the msbuild.exe) seems to be messing with the codepage of our generated files. Resulting in æøå and characters alike are being converted to what seems to be ANSI encoding (this doesn't happen when running on XP).
I've been searching the net to find a viable solution to our problem and the only thing I have come upon is that the .NET framework version 4 has a parameter for codepage. Since we are using webdeploy build files on the 2.0 framework (and don't have time to roll our projects on to the next version framework) I would like to know if anyone has a quick remedy to resolve our problems with codepage.
I have several class files in App_Code in an ASP.net website running in Microsoft Visual Studio 2005 Professional.In liu of using a full unit test suite I just want to somehow compile those project-wide classses into an .EXE so that I can nightly run unit tests on them.I do know how to create a separate C# library project consisting of those files and how to include them into my website--but that is not desirable--I don't want to give up the ability to make on-the-fly code changes of those library classes when running the website in the debugger. As far as I know .Net debugger isn't powerful enough to modify code in included libraries with instant auto re-compilation on page re-load.So, I want my cake and eat it, too:
Command-line unit testing of website class files in App_Code directoryBeing able to modify those class files w/o stopping/re-starting the web debugger.
Is there anyways to launch Cassini web server from a command line? The exe appears to be in this path, C:Program Files (x86)Common Filesmicrosoft sharedDevServer10.0
View 1 RepliesHow do I build a web application project from command line using Web Developer Express 2010?
I am using the same command format that I would use with devenv.exe (Visual Studio), so I can evaluate us moving forward to VS2010. However, I am having real trouble building our code. Our solution consists of 4-5 projects, consisting of assemblies. The last assembly is the web site code. The root .sln file is the one which when opening in the IDE can click Rebuild All, and the DLL's of each project are generated and then brought into the website project.
However, when I run vwdexpress.exe from the command line nothing happens and no Dlls are generated. This is not giving me any confidence to run with VS2010.
the command line is like so:
C:inetpubwwwrootmyprojectvwdexpress /build release mysolution.sln
The in folders of each respective project are empty, but it takes 3-4 seconds for the command to finish, which gives me the impression it did something.
I'm writing my application in ASP.Net and everything works fine,but when I put it online,it won't display my .aspx pages.I get this error:
I keep getting this error when I put my asp files online:
Invalid @ Command directive
/left.aspx, line 1
The specified 'Page Language="vb" AutoEventWireup="false" Codebehind="left.aspx.vb" Inherits="shoppingknokkeheist.left" ' option is unknown or invalid.
I set the line in code for debug and while running it does not stop there. So I use System.Diagnostics.Debugger.Break(). Sometimes it stops and sometimes the debugger shows a blank screen. All use the same inputs.
View 2 Replies