Web Forms :: Strange Postback Arise When Using Application_BeginRequest?
Dec 15, 2010
I have a problem using Application_BeginRequest and I have absolutely no clue what is going on. When using this code, my website works fine:
[Code]....
Now, when I only alter it like this (note that I am actually doing nothing special):
[Code]....
This small change in code causes that forms don't postback anymore. I am truely clueless why this happens when trying to get some request.form variables.Stupid thing is, when debugging the website using visual studio, everything works fine.
View 8 Replies
Similar Messages:
Jun 11, 2010
I have an issue that seems to only happen on my production server. I show or hide table rows whenever the buttons are clicked. However, when I do a postback on the checkbox, all of the rows become visible and the textbox stays empty. It works correctly on my test server and local workstation, just not in production.
Here is the markup...
[Code]....
Here is the code behind...
[Code]....
Here are the unexpected results whenever I check the chkShow2 checkbox... I am guessing this is a configuration issue on the server.
View 1 Replies
Sep 2, 2010
I have two versions of a website. One runs on IIS server on a local PC, the other runs on the ASP.NET development environment included on Visual Studio (localhost). Apart from that, the file stucture of both is the same, although only the one running on IIS works properly, and this seems to be related to the fact that the IIS version calls Application_BeginRequest() where the other doesn't.
I've looked at the differences between IIS server and the ASP development environment in: [URL], and it says that IIS and the ASP development server deal with static content in that for IIS in that on IIS static content does not go through the ASP.NET runtime like it does on the dev environment (but I'm not sure exactly what this means).
I've done a number of tests involving images, etc, and have noticed that when the image is of the form:
<img src="Image/MyImage.jpg...>
the IIS server version calls Application_BeginRequest(), but the visual studio development environment version doesn't.
However, if I change the above code to use:
<img src="<%=ResolveUrl("~/Image/MyImage.jpg")%>" ...>
it will call Application_BeginRequest().
In my case, it is necessary to call Application_BeginRequest because this creates a new path and calls
RewritePath().
The problem occurs when using links such as <a href="..." ...>, because if I use static content it won't call Application_BeginRequest() and the path won't be re-written. But If I change it to href=" %=ResolveUrl("~/...")%>" (for some reason, it will only call BeginRequest() if the path begins with a tilde ~), the path is re-written incorrectly.
I'm not really sure how to find out why the IIS version is calling Application_BeginRequest() from all the time (the callstack just says "external code"), or why it is calling it whereas the local dev server version isn't.
If anybody can explain this, or knows of any sites that go into this so I can master the basics, I'd be very grateful.
View 6 Replies
Jun 11, 2010
I want to protect one file in a subdirectory with Global.asax. (I know that this isn't the conventional way of going about this) but it works on my computer and not on the server.I have a global.asax file in my root dir and Application_BeginRequest checks if the user is requesting a particular file. If they are logged in, it allows access. If they are not logged in they are redirected to the default page.My problem is this: My code works on my personal computer but does not work on the server. Do I have to configure a setting in the web.config or adjust something on the server? Code:
Sub Application_BeginRequest(ByVal sender As Object, ByVal e As EventArgs)
Dim fullOrigionalpath As String = Request.Url.ToString.ToLower
'PROTECTED FILE
If fullOrigionalpath.Contains("/uploads/groups.xls") Then
If HttpContext.Current.User.Identity.IsAuthenticated = False Then Response.Redirect("~/login.aspx")
End If
End Sub
View 9 Replies
Jul 23, 2010
I've seen a few posts about Application_BeginRequest, but non seems to have my problem.
My Application_BeginRequest is being called for every image in my website.
The StaticFile Handler is enabled with * as the Path, but it's at the end of the list.
Is this the normal behaviour? Or should I add .gif, .jpg and so on on top of the list?
This is on my IIS7.5 Win7 Development Server. Didn't check it on the production server yet.
Update:
Setting runAllManagedModulesForAllRequests=false would help. But then the ASP.NET URL Mapping does not work anymore. I tried disable it just for the image directly, but that had no effect?
<location path="Resources">
<system.webServer>
<modules runAllManagedModulesForAllRequests="false">
</modules>
</system.webServer>
<location>
View 1 Replies
Nov 4, 2010
I have a site with multiple domains pointing to it. I wanted to redirect all requests to main domain so I've created a method called RedirectToRealDomain("domain.com") to check and redirect all requests to my preferred domainAt the moment it lives on Session_Start but I am planing to move it to Application_BeginRequest event. As I understand Session_Start only raised when new session started but Application_BeginRequest raised on all requests. RedirectToRealDomain method doesn't do any DB lookups or anything expensive apart from comparing strings.
View 2 Replies
Feb 17, 2011
I've got some tracing statements with timestamps on an ASP.Net IIS application that gets a lot of traffic. I've got trace statements at the end of Application_BeginRequest and the beginning of Application_PreRequestHandlerExecute in my Global.asax. Occasionally there is a big delay between the end of BeginRequest and the start of PreRequestHandlerExecute, i.e. more than 5 seconds.
What is going on in the lifecycle of an HttpRequest between these two method calls that could be taking so long? This is IIS7 on Windows Server 2008.
View 2 Replies
Jun 18, 2010
I'm trying to get a reference to the user object in my Global.asax file's Application_BeginRequest. I'm using the property Context.User but I get a NullReferenceException. Is it possible to get a user object reference in Application_BeginRequest?
View 2 Replies
Feb 17, 2011
I am trying to create a 404 handling page but I am now stuck with the page only working for .aspx files, which isn't really what I need.I am running on IIS6.The site has a wildcard mapping,for extensionless URLs.All requests go through Application_BeginRequest in Global.asax but not all errors go through Application_Error.Is there a way where I can get the Application_Error to raise for non .aspx files?
This is the code inside the Application_Error
HttpException serverError = (HttpException)Server.GetLastError();
if (serverError != null) {
[code]...
View 1 Replies
Dec 14, 2010
We are obesrving strange problems when performing sress test of our applciation. We use Application_BeginRequest and Application_EndRequest to log the beginning and end of the web request, together, with the thread id.
However, from our logs, we see that Application_Begin_REquest is not being fired:
We use the following code to do the logging in global.asax.cs:
protected void Application_BeginRequest(object sender, EventArgs e)
{
string url = ""; [code]....
This is our log file. Urls are omitted The 00013 column is thread id.
14.12.10 21:41:25.042 00013 00000 Request: 172.23.26.41
14.12.10 21:41:25.068 00013 00000 End request: 172.23.26.41
14.12.10 21:41:25.212 00013 00000 Request: 172.23.26.41
14.12.10 21:41:25.223 00013 00000 End request: 172.23.26.41
14.12.10 21:41:30.974 00013 00000 End request: 172.23.26.88
You can see that there are two "End request" in the last two lines, but there is no (Begin) Request for the last log line.Our Dbg.WriteLine uses System.Diagnostics trace listeners to ouput data to the file.
Environment: Windows Server 2008 R2, ASP.NET 3.5
This only happens when performin stress test. CPU utilization is around 60%, there are max 10 concurent requests executing.
UPDATE: I have found out that some other also did have similar problems (althoug in different configuration:
http://forums.iis.net/t/1154954.aspx)
Matej
UPDATE#2: This night be related to fact, that Thread.GetHashCode() which is used to print out the thread identifier in our log fies could change. See ASP.NET - Thread.GetHashCode() changes
View 2 Replies
May 24, 2010
How to handle Application_BeginRequest using a custom filter in asp.net mvc?
I want to restore session only for one route (~/my-url).
It would be cool, if I could create a custom filter and handle that.
protected void Application_BeginRequest(object sender, EventArgs e)
{
var context = HttpContext.Current; [code]......
View 17 Replies
Jun 30, 2010
I created a web service on localhost, and I tried to call it from a web app (also on the localhost) via HttpWebRequest, but Application_BeginRequest in Global.asax didn't fire. When I type in IE 'http://localhost:8010/Test/' (the web service) Application_BeginRequest fires. Where is the problem? How can I test a localhost web service from a page which is also on localhost?
View 2 Replies
Jul 16, 2010
I have a web application that users insert some comments to the database. But when they try to Write some non-Ascii character to textbox some strange characters apperars instaed of my entered characters.For example When i write ı it appears like this ı
View 1 Replies
Jun 16, 2010
Is there a way to retrieving parameter names and values passed to a web method from Request object? I've read somewhere that you need extra code to access the soap body. Any known workarounds to be able to see the soap body from Application_BeginRequest?
View 1 Replies
Oct 12, 2010
I uploaded my .net website precompiled under vs 2008. I do not have this issue with my site running on a webhost with .net 2.0 under sql 2005. When I login to the site, there are oriental characters:
[Code]....
Every one of the squares is an oriental character. I have tested this on two servers now. As you can see, the characters start right after the Doctype line. This is where another page is loaded on my site.
View 3 Replies
Nov 28, 2010
I am having a very odd issue for my website [URL]. I am seeing strange characters in the home page. visit the site [URL] to view the details The site works perfectly in local system The site is done asp 2.0 and sql server 2005. I have made the customer error mode to Off to view the issues. But the page is coming in odd characters.
View 5 Replies
Mar 8, 2010
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
<head>
[code]...
View 3 Replies
Nov 15, 2010
I have strange behavior when changing from ItemTemplate to EditItemTemplate. both the ItemTemplate and EditItemTemplate contain the same textbox with multiline. Except the ItemTemplate got the ReadOnly parameter. When the row is getting in EditMode and I enter the textbox everything is disabled. I click on another column that contains a label instead of a multiline textbox and get back in the textbox I can do everything. When I enter in the same row another MultiLine textbox I cannot do anything until I click on a label and get back in that TextBox. When the textboxes are in normal mode I don't seem to be having this issues. What is changed between the MultiLine and SingleLine textbox? What kind of PostBack or something could cause this strange behavior?
View 2 Replies
Dec 8, 2010
I fill a third-pard component variable in Global.Application_BeginRequest(). Everything is fine until I set IIS7 into the Integrated mode. In that case the method Application_BeginRequest() is not called (Application_Start is ok).May be some module is registered wrong?(I have found a same problem here on forum, but without a solution:[URL]
View 1 Replies
Apr 3, 2010
I have a page with 14 dropdown lists. In the first page load (ie. not isPostback) I set the selectedIndex of the dropdownlists individually but I find that they are all set to the value I use for the last dropdownlist set. Here is the code
comboFirstJudge1.SelectedIndex = 0
comboFirstJudge2.SelectedIndex = 0
<so on for all the dropdown lists until the last one>
comboFirstJudge14.SelectedIndex = 4
The result is that all dropdown lists have SelectedIndex = 4. If I run the same code on a postback it works just fine (the first lists have SelectedIndex = 0 and the last one = 4).
View 6 Replies
Feb 9, 2011
I have a site that was sucesfully upgraded to Framework 3.5 on Vista with VS2008. Now however after installing VS2010 and upgraded to Win 7 wierd things are happenning and was wonderring if any of you have experienced this and how you've dealt with it.First thing I notice in my main page that the four user controls are not in alignment. They should appear side by side in a single row, however now they spread acros two rows with one on top and three on the bottom. Also my graphics and navigation is not where they supposed to be. Just for comparison, if run the existing solution on Win 2003 with VS2008, it works like it supposed to. All the formatting is handled in .css and that didn't change either.
[Code]....
[Code]....
View 1 Replies
Apr 2, 2010
I am doing some redirecting of old url in global.asax's application_beginrequest. Redirecting works fine when getting the url's using an http get but not when using an http head request.
View 4 Replies
Jul 18, 2010
I have ListView and in the ItemTemplate I have:
[Code]....
in code behind I'm doing:
[Code]....
View 6 Replies
Feb 1, 2010
I have a asp:button in template field of gridview, I set command name for this and in grid I mention on command event. On clicking the page it shows error message is :Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/>
[code]...
View 2 Replies
Jun 10, 2010
I'm having a strange problem - probably has a simple answer but, I haven't been able to find it or figure out the cause. I'm hoping someone has had this same problem and figured it out.
Basically - my application works great on the development machine. So I copy it over to the server and it works great. Come back the next day and my GridView is only displaying the first record...I then log into the server remotely and open the web page on the server and all records are returned, so the application works fine on the server. I then return to the local machine and now the application is returning all rows in the GridView. So, weird but, what whatever, it works. Go away and come back again the next day and...
1 ) Only 1 record from dataset is displayed in GridView
2 ) Log onto server remotely and view webpage on server --> all records now display
3 ) Try again on local machine, now application works fine...grr. What am I doing wrong here? Using Visual Web Developer 2008 on Windows XP. Querying SQL Server 2000 (I know, I should switch to 2005 and use VWD 2010 - but ouch, really!) when a text box value changes (Vendor_PO_TextBox.TextChanged)
[Code]....
View 1 Replies