Web Forms :: Load Pure Html-code In An Ascx-file When Needed?

Jan 9, 2010

i have two buttons, which point to some onclick-methods in my code-behind file. inside these btn_click-codes i want to start adding pure html-code to my page, which was told to me in this forum having done by using ascx-files. note: there would be no code-behind in case of using the ascx-files.

however i do not see a possibility to load these ascx-files within btn_click-code? how to do?

in order to give you an idea of my html-code i have pasted two of them here:

[Code]....

maybe this is the complete wrong approach (as i.e. i believe that body-tags should not be included in .ascx-code). in this - how to do better?

View 7 Replies


Similar Messages:

Get Clean / Pure HTML From ASMX Web Service Call?

Oct 12, 2010

I am trying to use jQuery .load() to get straight html from a asmx web service:

$('#target').load('MyService.asmx/GetHtml');

In .NET code, GetHtml() returns as string:

[WebMethod(EnableSession = false)]
[ScriptMethod(UseHttpGet = true, ResponseFormat = ResponseFormat.Xml)]
public string GetHtml()
{
return "<span>Hi</span>";
}

That returns:

<?xml version="1.0" encoding="utf-8"?>
<string xmlns="http://tempuri.org/"><span>Hi</span></string>

Notice that the string is encoded. With that encoding, $.load doesn't work right. The displayed text actually has the tags shown.

How can I get the WebMethod call to return just this?

<span>Hi</span>

View 4 Replies

Update A Web User Control Code (ascx.cs) File Without Compile The Entire Site?

Apr 2, 2011

I'm using vs2010, asp.net 4 webform.Is there anyway which i can update a code behind file (ascx.cs) file without compile the whole site.because i just want to debug some ascx.cs file, and compile a big whole site will cost 1 minutes at least.

View 1 Replies

C# - Extend Control (ASCX) And Access Base Markup File From Subclass Code?

Jan 29, 2010

I'm building form validation controls for our C# ASP application. The bulk of the work is handled by a BaseValidator control (subclassing System.Web.UI.UserControl), which also has the markup for the validation output. This is then extended by subcontrols like PasswordValidator, that provides the Validate method and any extra fields needed by that validator control.

(The end goal is to have controls like <uc1:PasswordValidator ControlId="txtPassword" /> which we can plop into any form with minimum duplication.)

However, PasswordValidator.ascx.cs cannot access the form elements defined in BaseValidator.ascx; the only way I've found to do so is to duplicate the markup in each subcontrol's *.ascx file. How can I extend BaseValidator.ascx.cs and access BaseValidator.ascx's markup in the subclass?

View 3 Replies

Web Forms :: How To Prevent "inline Code" In .aspx Or .ascx File

Apr 9, 2010

How i prevent "inline code" in .aspx or .ascx file like sharepoint "Code blocks are not allowed in this file"

View 1 Replies

AJAX :: Only Render / Load Images Only When Needed?

Sep 13, 2010

Any tips on where to start looking/investigate Re how to code pages to only load/render images when that part of the page is visible ?

e.g. Recent Google Image Search and Facebook interfaces.

Up to now my Ajax experience has been limited to extensions + Toolkit so not sure where to start looking.

View 3 Replies

Web Forms :: Unable To Load Ascx Dynamically

Jan 24, 2010

Ive got some custom code that im using to load user controls dynamically depending on the option a user selects from a menu control on the page.

I wanted to create an admin page that can be used to provide a one stop shop to complete all actions within an app im building, (like a template/iframe scenario that loads all selections in a screen on the right)

My code works, however when the user has completed an action sucesfully within one ascx, then selects another from the menu on the left, it wont load the new control, it comes up blank like it hasnt refreshed properly meaning that they have to close down the page and reopen it. (which is very annoying)

My codes below, can someone take a look and see if they can see whats wrong.

[Code]....

End Class

[Code]....

View 2 Replies

Web Forms :: How To Dynamically Create HTML File From The Code

Sep 17, 2010

Precisely and concisely, I have aspx page that has only one button "Generate". If the user clicked on this button, one HTML page should be created.

The created HTML page should have title "Home" and the Body should contain "Hello World".

1) What is the code that should be written inside "Generate" button in order to accomplish this functionality?

2) Assuming the HTML page gets created, How to store it inside specific folder on the local drive? Or how to store it inside DB?

View 7 Replies

Web Forms :: Accessing A HTML Button's Value From Code Behind File?

Jan 8, 2011

Is it possible to accessing a HTML button's value from code behind file?

View 2 Replies

Load Html File Dynamically On A Place Hoder?

Feb 12, 2010

consider I have a html file (not user control ) on a repert, I would like to load it dynamically on a place hoder

View 2 Replies

Use Genealogy (Family Tree) Source Code Or A Library Needed?

May 31, 2010

I am looking for any source code for my website to include a genealogy. I am not having time to build it up from the scratch. If any one can provide me the libraries or any partial code, so I could use it

View 2 Replies

DataSource Controls :: Sample Code For Uploading And/or Retrieving Images Needed?

Jan 1, 2010

i am looking for some sample code in order to upload and/or retrieve images stored in a database.even the web is full of samples, i was not able to find one without using blobs as i would like to save only the directory of an image when it comes to the place of storing. the reason behind is that i do want to have my database small for some reason and therefore only want to save links to my images inside.

View 5 Replies

Dynamically Load An Image From Code Behind File?

Oct 8, 2010

I'm trying to dynamically load an image from my code behind file, however I want to be able to resize the image thus reducing the file size sent to the client. I've come across a few samples but without much luck. So far I have the following:

[Code]....

Unfortunately I now need to load this image into control panel...but nowhere can I find how to do this.

View 2 Replies

Looking For Code To Convert Html File Into Pdf File?

Feb 18, 2010

send me code to convert html file into pdf file using asp.net

View 4 Replies

Configuration :: Decryption Needed For Encrypted Web.config File?

Jul 20, 2010

I have a encrpted web.config file. How to decrypt this file. Because I need to update connection string information in that file. So i need to decrypt the existing encrypted config and update the connection string then again I have to encrypt.Did not work below command. getting error(Decrypting configuration section...Failed to decrypt using provider 'RsaProtectedConfigurationProvider'. Error mess
age from the provider: Bad Data.)

aspnet_regiis -pdf "connectionStrings" <physical path of the we b.config file in server>

View 1 Replies

DataSource Controls :: Code To Load Xml File Into Sql Table

Apr 29, 2010

I need to write a code in asp.net that pick xml file and load it's content into sql table. How it can be done?Which way is better, to create the table dynamically every time I pick an xml and after I done with it to delete it.. or to create the table manually once, and just fill it and truncate it during doing the job?

View 5 Replies

How To Load Ascx Control In .net Mvc View

Jul 16, 2010

how can i load ascx control in asp.net mvc view ? i am using url.action in src but it is not working.

View 1 Replies

Web Forms :: Code Works On Aspx But Not On Ascx

Aug 21, 2010

Not sure which category to put this question in, so I will put it in here. Just to give you an idea of the layout of my solution, I have the main project, along with 2 class libraries, BLL and DAL. (Business Logic Layer and Data Access Layer) The BLL refers to the DAL and the main project refers to the BLL. I had a test website and the code worked fine, but the same code will not work on the real project. The only difference is that in the test project, the code was on an aspx code behind, whereas in the real project, it is an ascx code behind (Web User Control

)

The code is:

[Code]....

Dim connectionString As String = ConfigurationManager.ConnectionStrings("ASPNETDBConnectionString").ConnectionString

View 5 Replies

Get The Html Code In Cs File?

Jan 28, 2011

I have a form which contains Gridview(With paging enabled) and some other controls

I want to the html source code of the gridview after it is rendered in the browser

View 8 Replies

AJAX :: Load ASCX Controls Dynamically?

Jan 12, 2010

I'm developing an ASP.NET application and I'm trying to do the following:

I'm going to have only one ASPX page splitted into two columns. On the left column is going to be a TreeView, and on the right column is going to be something to edit treeview's nodes.

When the user can select a treeview's node to edit on the right column. Depending on the node's depth fields on right column will vary.

I wondering to use ASCX controls and load on right column dinamically using AJAX, for example. Is there a better choice? Can I do that?

I don't want to reload the entire page when the user wants to edit a treeview's node. Maybe I'm going to need an UpdatePanel on the right column to load dinamically ASCX controls, isn't it?

View 2 Replies

C# - Load A WebUserControl.ascx To A Panel In Default Page?

Feb 17, 2011

I am having a default page namely default.aspx in this i will have panel. And i will have 2 other forms namely Webusercontrol1.ascx and Webusercontrol2.ascx i will design the page with some controls now is it possible to load this page in to the panel which was on default page like as we did in WINFORMS.

View 2 Replies

Put C# Into Html File - Code Doesn't Work

Oct 16, 2010

How can I put the C# code into the htm file ? Then following code does not work. How can I make it work?

-------------- begin RSSTable.htm ---------------
ProductId = <%= Request.Params.Get("ProductId") %
-------------- end RSSTable.htm ----------------

View 3 Replies

Web Forms :: Can Use HttpResponse From An Ascx File

Feb 19, 2011

I am looking to render excel from an web control. I have code that works from a web page, but when I run it in an ascx.cs file it doesn't do anything.

Is there something about being in an ascx that makes a difference?

Here is my code:

Response.ClearContent();
Response.AddHeader("content-disposition", "attachment; filename=file.xls");
Response.ContentType = "application/vnd.ms-excel";
Response.BinaryWrite(result);
Response.End();
Response.Flush();

View 6 Replies

MVC :: Comment Out A Mixture Of C# And Html Code In A View File

Mar 28, 2011

The following dummy code in a view file works fine:

[Code]....

It simply displays "iFoo = 3". Commenting out the if block as following does not work:

[Code]....

What is the correct way to comment out a mixture of C# and html code in a view file?

View 4 Replies

MVC :: ASCX Html.ActionLink Not Showing

Aug 12, 2010

I assume this link is correct

Html.ActionLink("Edit", "Edit" , new {Controller = "Item", id = item.Product_GUID});

the books tell me things i have read etc.i should render html as <a href="/Edit/Item?id=foo>Edit</a>

I am sending them to "another controller" to edit the item...

But this is not rendering the hyperlink in my browser, UGH....

this code is in a ascx page so i can call it with partialaction.

All i can think is that its not working because its 5am and i have been up since 9am yesterday..

View 5 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved