Say you have a Grid which is having paging, editing and extra, I usually put the whole grid in UpdatePanel to make the page partially render with AJAX, but I hear that u can do AJAX without UpdatePanel, how is that?
View 1 RepliesI am currently using a asp.net 2.0 with visual studio 2005.
I am trying to build a web application using ajax.
but when I drag the ajax updatepanel on asp.net page it is not resizable,so how should i put other controls on it?
i am using a TabContainer and at each TabPanel i have embed an UpdatePanel in order to update each tab alone.
this is my code:
[Code]....
the problem is that it makes several seconds to update each tab (the same time for every tab) and i asume that this is happening because it updates all the TabContainer and not the selected Tab.
I have two updatepanels on my site (upanProfileSearch and upanMemberList). When I hit the button in the upanProfileSearch it should bind the Data Items in the gridview in upanMemberList and here make a RowFilter on the text in upanProfileSearch. When I make a run to curser, I can see, it happens. It makes a RowFilter. but it doesn't update the gridview. Can anyone tell me why it doesn't update? I have UpdateMode="Always" and RenderMode="inline" on both UpdatePanels.
[Code]....
[Code]....
I have a dropdownlist, that causes a postback. On the SelectedIndexChanged event, is it possible to force a placeholder that is within a different UpdatePanel to change it's visibility?
For example, when the SelectedItem.Value of DropDownList1 is "1" then show Placeholder1, otherwise hide it.
What I am most interested in is how to configure the UpdatePanels to allow this.
How to implement updatepanel functionality without updatepanel?
I am tring to use XMLHttpRequest but I am getting problem while redering a usercontrol containing postback controls in response of an Ajax request.
Here is my code
[Code]....
[Code]....
[Code]....
I have a web user control with one updatepanel (pnlUpdate_2), some controls and one apply button. I display the web user control as a modalpopup in my default page. In my default page i have an updatepanel (pnlUpdate_1) with a gridview and I modify that gridview with the apply button of the web user control. The web user control is for made a custom search of the gridview data. I have a problem with both updatepanels. If I set the updatemode as always in one of them (pnlUpdate_1) and the other as conditional (pnlUpdate_2), the pnlUpdate_1 make a postback in the pnlUpdate_2; I'm not an expert on this but I think that's why the pnlUpdate_2 disappear and reappear after postback of some controls in that updatepanel (not the apply button, it close the modal after postback). I try all the combinations and the problem persists. So I put both updatepanels as conditional and in some way it works; now the problem is that when I click the apply button in pnlUpdate_2 to modify the gridview in pnlUpdate_1 the pnlUpdate_1 not made the postback I get the pnlUpdate_2 postback when I use some control inside the pnlUpdate_1.
How can I postback the pnlUpdate1 from pnlUpdate_2 with the apply button?
i have a website with three UpdatePanel Control and inside of each UpdatePanels has ONE Gridview and a SqlDataSource Control.
all gridviews are connected to its own SqlDataSource Control. so technically when i run my website all gridviews automatically get their data from their respective SqlDataSource Control and display them accordingly.
but what i need to do is instead of letting all the update panels to load each gridview their data upon Onload event, i need the updatepanel to update on queue, (Technically changing the UpdateMode to Conditional does not solve my problem.) there will be an event which will trigger the updatepanel to update later.
I am using two Updatepanels in ASP.NET AJAX and as soon as there is some event in first updatepanel, it will get refreshed at that time I want my second Updatepanel getting refreshed too. How can I do that ?
View 2 RepliesI have a page that has a updatepanel around a gridview control that is within my modalpopup. So you land on the page, there is a link that when clicked will open the model popup. Initially the gridview merely displayed saved records you personally choseto save, well when you selected one, the popup would close and the data from that row would be passed to the gridview within the page to display details.. no issue when it was setup that way.. well eventually it was decided to add a delete option within themodal popup gridview so now when viewing the records you can delete it if not needed. works well.. but now with the updatepanel surrounding the gridview when i click on my "select" link it doesnt execute my
View 3 RepliesI am using UrlRewritting in my project. all functionality is working proper but I cant use the ASP.NET Ajax like updatePanel etc. the problem is ScriptResource.axd file is missing (404 Error). I used lot of ASP.net Ajax control before using UrlRewritting so I cant change the whole code.....
how can I enable ASP.NET Ajax? have any Alternative to replace ASP.NET Ajax without changing in codebehind.
I try I cannot seem to find a satisfactory solution. As far as I can tell from the documentation a ModalPopupExtender should be able to reside inside an UpdatePanel. However, I simply cannot get it to work.After the first refresh of the UpdatePanel I get errors of various kinds depending on what I've tried.
What I'm trying to accomplish is having a button inside an UpdatePanel which launches a popup. Another button inside the UpdatePanel causes a partial postback. And finally a button within the popup has to cause a partial postback. I have tried at least five different approaches to this problem and finally I gave up and went with a very inelegant solution. I don't think my requirements are all that strange, am I doing something wrong?
First I tried this:
[code]....
This works fine until after the first postback when the Cancel-button (Button4) starts causing synchronous postbacks and the textbox starts to fill up with commas. I also tried the same as above but placing an UpdatePanel within Panel4 (the popup) - no go. Then I tried causing the postbacks in javascript launched from the ModalPopupExtender's OnOkScript - still it starts failing. I tried another couple of attempts
all of which failed. Finally I decided to move the ModalPopupExtender outside the UpdatePanel, add dummy buttons and a bit of javascript to launch and hide the popup. Although this satisfies my UI requirements it just plain wrong from a design perspective and it annoys me that I could not get the extender to work inside an UpdatePanel. Has anyone succeded with placing a ModalPopupExtender in an UpdatePanel with the requirements I stated above? Or should it be added to the list of controls that's just not compatible with the UpdatePanel?
this is my final solution:
[Code]....
I get following error when I click on the button.I am Using IE 7.0 and Updatepanel control for AJAX in the aspx page (Not in master Page).This error goes After I clear cache.
"Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
I know this may be easy, but I have looked at it for a bit of time and maybe my brain is going in circle.OK, I am learing PopupControlExtender. Looks like it is a good thing to have. One (style of) example is to have a TextBox. Click on it and the PopupControlExtender will come up. Sample code may be like the Example 1 in this
Introduction.
Question:
Why there is a need to put UpdatePanel inside the Panel? It is the TextBox which needs to be updated. Why the TextBox is not put into an UpdatePanel? (I try Example 1 and it works without having to put the TextBox inside an UpdatePanel.)
I have an ASP.NET page with the following controls on it.
<asp:UpdatePanel ID="UpdatePanel3" UpdateMode="Conditional" runat="server">
I have a page with an UpdatePanel wich inside has a dropdownlist control. Everything on the page is created dynamically on Page_Init.
DropDownList items are taken from the database with a Select based on some table.
I want to click a button inside the drop down list that inserts a new row in the table that dropdownlist control is based on, and then, on another postback I want the item to appear in the dropdownlist and select it.
On the first button click I insert my row. Ok. On the second button click (I just want to do a postback), in Page_Init I check that the dropdownlist control contains the item I have inserted, and it is there. But in Page_Load event of the same postback I want to set the value selected to be the new value,
but now the drop down list doesn't contain the item anymore!.
I have a simple aspx page created using VS2010, having a master and a content page. I have added the ScriptManager from AJAXControlToolkit on the master page and an update panel on the content page. Essentially clicking a link button should display a popup box through the PopupControlExtender. The issue I am facing is that eventhough I have AJAXified the page, clicking the Linkbutton (named lnkFlag) doesn't do partial update, instead it makes full page postback. This could be infered by the fact that both the lblOut and lblIn labels are updated with the server's time. If there is a partial page postback then lblOut should not be updated, since it is outside the UpdatePanel.
ScriptManager in the masterpage:
[Code]....
Updatepanel code in the content page:
[Code]....
I am trying to have a TabContainer with a dynamic/changeable number of tabs: when the user clicks on the last tab labeled "New", a new tab is added to the list. There are two issues:
1) The tab container's ActiveTabChanged event fires twice, adding two tabs. Why is that?
2) Any further clicking on the tabs gives an error, "There is no source code at the current location." How is that possible?
My ASPX:
[Code]....
Codebehind:
[Code]....
I have an UpdatePanel like this:
asp:UpdatePanel ID="uppError" runat="server">
<ContentTemplate>
<uc3:AjaxMessageControl ID="ucMessage" runat="server" />
</ContentTemplate>
</asp:UpdatePanel>
Is there a way to hide this UpdatePanel after some seconds?
i used update panel and uploading control ,i want to upload image with uploadingControl that is in UpdatePanel when click on button ,
View 3 Repliesam newone on this forum and I've a few question about updatepanel inside datalist;I've made a survey and code below:
[Code]....
In my application, I am using different user control for different tasks. I used an update panel to load user controls with ajax. It is working fine. I am using some other update panels inside the user controls. My problem is, the inner update panel(UpdatePanel placed inside the user control) is not working properly.
View 1 Replies[Code]....
The FileUpload1.HasFile returns false when in the UpdatePanel Solution
[Code]....
I have 2 dropdownlists, each one is in a seperate loginview. On the selectedindexchanged event of one dropdown, I want to repopulate the 2nd dropdown based on the selection.When the page loads it throws this error:"A control with ID 'DropDownList_Company' could not be found for the trigger in UpdatePanel 'UpdatePanel_Title'.Does anyone know how I can get around this?
<asp:LoginView ID="LoginView_Company" runat="server">
<RoleGroups>
<asp:RoleGroup Roles="Admin">
[code]...
I have a menu and when I click on the menuItem, I want to execute some code and load the data next to the menu. I want to use updatepanel to avoid postback.Here is what I have:
[Code]....
I am not sure what I need to do next.... When I click, on the item, for now I just want to show some text in the Label.