I am creating a GridView/DetailsView page. I have a grid that displays a bunch of rows, when a row is selected it uses a DetailsView to allow for Insert/Update.
My question is what is the best way to link these? I do not want to reach out to the web service again, all the data i need is in the selected grid view row. I basically have 2 separate data sources that share the same "DataObjectTypeName", the first data source retrieves the data, and the other to do the CRUD.
What is the best way to transfer the Selected Grid View row to the Details View? Am I going to have to manualy handle the Insert/Update events and call the data source myself?
Is there no way to link these two so they use the same data source ?
I have a gridview and in which there is a select button .. when I clicked the button .. then the data in gridview with indexes that have been, can move to the details view ..I use rowcommand event for the select button in gridview..
I use viewstate in details view..
How to passing data from gridview to details view?
But I´m trying to do that programmatically, not with the sqldatasource. So I wrote the method that binds data to Detailsview and I call it in the page_load. The problem is that I have to click two times on the select button to view the detailsview. The first time I click on the select button nothing happens.
I have a gridview with a Select button. Clicking the Select button for a particular item, I need its full details displayed in DetailsView. how I can bind to DetailsView? Here is what I have so far.
I want to populate my DetailsView with values from my first page.
This values get with session. I can display this values in my page. But i dont know how can i bring from my North Wind db. Here is my second page code behind in VB. How can i get this all data from my db based this values?
I have a gridView and DetailsView.gridView.enabledselection=true. when I select a row I want to display that record in DetailsView.I have done it previously but after lot of php coding, I forgot it :S can someone remind it to me?there is something datakeyname or something like this parameters to specify
My web form contains a detailsview control that I have added a templated field to with a DropDownList in the InsertItemTemplate. The DetailsView default mode is 'insert. My detailsview is attached to a sqldatasource that has a stored procedure in the db to handle the insert. When I enter data in the fields and select insert all values from the detailsview are written to the table except for the selection that was made in the dropdownlist. I am using the ddl.selecteditem.value to populate my variable however when the insert method is envoked it doesn't send my value. The DDL value that I am capturing does not need to be written to the table it is just a flag for some variables that need to be set at the stored proc level. How do I get the DDL selected value to be sent with the insert statement?
Here is my code behind:
Protected Sub DropDownList1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Dim temp As DropDownList Dim AccessLevel As String temp = AddUserDetailsView.FindControl("DropDownList1")End Sub AccessLevel = temp.SelectedItem.Value Label1.Text = AccessLevel
I am trying to retrieve Detailsview records filtered by dropdownlist which is populated within Detailsview template.
not sure if this is possible but,
i have three cascading dropdownlists within the detailsview and want to set the third dropdownlist value and dependant dropdownlist values according to retrieved record.
at moment they cascade values independant of what record set is retrieved in detailsview and obtain there parameter from selected dropdownlist in pagebehind.
below is select statement bound to Detailsview and itemtemplate for third Dropdownlist control
Im not sure what i could have done wrong here but i created a dataset (ran a query and it returns the correct data) - created my BLL class - bound the ObjectDataSource to the control using the BLL - ran the site and all the data is showing as expected. Now i click edit columns (from DetailsView smart tag) and the selected fields are empty. I refresh the schema and this makes no difference. What could i be doing wrong?
I have two gridviews on same page - If a record is selected in Gridview1, I need to unselect a record (if one is selected) in Gridview2 - and vice-versa.
I am trying to arrange the information from a SQL record into a 3 column by 3 row table to fit the form presentation that I want. I have placed on the page 3X3 table and then tried to place a detailsview in the first cell for the first picture called P1dv.
I have place a detailsview in the last cell that would control the paging of information called Controldv. I need to fiqure out how to link P1dv paging to Controldv page action. I am using visual web dev. 2005. I am not updating or editing these are read only views.
example of what i need the form output to look like:
Im fairly new to .net so apologise if this is a simple request!
I have a simple page with a GridView control getting data from a sql database. I have added a hyperlink as below <asp:HyperLinkField Text="Select" DataNavigateUrlFields="title_id" DataNavigateUrlFormatString="title.aspx?id={0}" />
On my title.aspx page, i have a detailsview control and i want to be able to retrieve information using the id from the gridview hyperlink.
In ASP.net when we perform paging over Gridview or DetailsView than the Gridview fetch all rows from the Database each time.
Suppose our Database contains 100 rows and we have configured Paging in Gridview with page size of 10 records per page.But whenever we click on the the pager control of gridview for any particular page no. then GridView should fetch only particular 10 rows from database.
If we click on page no 3 then it should query only rows 21-30 but it fetches all rows and neglect the remaining .which is simply a wastage of resources.
I'm hacking my way through ASP.Net WebForms, coming from VB.Net WinForms. I was hoping the transition would've been more seamless... it is not.
I have a GridView (Paging enabled) bound to a DataTable, filled with Joined tables from an Access 2000 DataBase.
The GridView and DetailsView are bound to the same DataTable.
In the GridView's SelectedIndexChanged Event I have the following:
vb.net Code:
' dtvSelected is the DetailsView' dgvJobTOF is the GridView Me.dtvSelected.PageIndex = Me.dgvJobTOF.SelectedIndex
When the page loads the first item in the GridView is also displayed in the DetailsView.
I've added a "Select" button in the GridView and when it is clicked the Data in the DetailsView remains the same regardless of the selected GridView row.
In ASP.net when we perform paging over Gridview or DetailsView than the Gridview fetch all rows from the Database each time.Suppose our Database contains 100 rows and we have configured Paging in Gridview with page size of 10 records per page.But whenever we click on the the pager control of gridview for any particular page no. then GridView should fetch only particular 10 row
am in commercial development for few months only,the team leader is not using gridview, detailsview, formview, repeater, datalist.we alwyas write our own looping to dislpay the data even it is read only.He said : we do this for better performance.and I am always thinking, so why microsoft create them???I checked other questions and articles, and I am still confused.
I have a GridView and DetailsView in a Master/Detail relationship inside an Update Panel.The GridView displays a set of records, and when a Select button in the GridView is clicked, the detailsview displays the record for edit.Initially the focus is on the GridView, and when the Select button is clicked, I want the focus to be on the first TextBox inside the DetailsView. This happens only when I remove the UpdatePanel from the form. If the Gridview/Detailsview pair is inside an updatepanel, the focus never goes to the DetailsView.How can I make the focus on the DetailsView inside an UpdatePanel
i am having gridview with two columns.one column contains checkboxes and another column contains Name.i have given UserId to DataKeyNames in gridview.Now i will check some checkboxes in gridview and click on button GetData. whenver i click on button GetData i need to get datakey values of all the gridview rows whatever checked in gridview using JQUERY
I have a gridview and detailsview on the same page. The detailsview is defaultmode="insert" and works perfectly (Role, Site and Department are all bound to ddls). The gridview displays information fine and deletes fine - but when i click edit it breaks. But i dont understand why as it is using the methods and data sources as the gridview. I did a test run on this a few weeks back and it worked in visual web developer, lost all the data when i formatted the hdd and now - i cant get it to work, but i am sure its exactly the same. error is
DataBinding: 'System.Data.DataRowView' does not contain a property with the nameXXXX.
It does that on each of the ddls for site, role and department. But the property is there! i can see it when i test my SPROCS and they display / work fine in the detailsview.
We are using gridview to display data and detailsview to show details, update, insert, and delete as needed. I am a bit confused on whether or not htmlencode and htmldecode is needed when storing data from detailsview. Gridviews always use boundfields and I think encoding and decoding is built in. For detailsview we use mostly templatefields (eval(), bind()), some boundfields, and some data is stored in codebehind using e.values[] or e.newvalues[].Here is where I've got the idea:http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.detailsview.itemupdated.aspxIf I use the iteration and htmlencode, detailsview read only mode displays decoded data. However, gridview displays encoded data and of course update mode of detailsview. So, it seems like detailsview using htmlencode and htmldecode somewhat, but I am not clear as to what degree and what would be the best way to handle it.
I am designing a web page that allows for the maintenance of a single table - so I have some controls that allow the user to specify some search parameters, a button that then populates a gridview with the result of the search meeting the search parameters, and a details view for inserting and updating specific records. The gridview and detailsview are bound to appropriate sql data sources.All pretty standard.There is also a "reset" button that clears the results of the current search - sets the visibility of the gridview and detailsview to false, and clears the search parameters. Again, pretty standard.What I have done is when the user goes to insert a new record, the gridview and search parameter specification controls are hidden, and the details view displayed. If they cancel the insert operation, the details view is hidden, and the search parms and gridview displayed - but what I am finding is that there are situations when a previously populated gridview is displayed. Here's the situation:1) Specify some search parameters, click search - and the gridview appears, with the appropriate records displayed.
2) Click on the clear button (oops - I didn't want to search, but add a new record). The gridview disappears, the search values are cleared out.3) Click on the insert button - the detailsview opens in "insert" mode.So far, this all works well, and is intuitave to the users.4) Click on the "cancel" button on the details view. I hide the details view, and show the gridview and search parameters. The gridview appears - with the results of the previous databinding still in it.My question is: Is there an easy way to "unbind" the gridview? From my understanding of how the datasource to gridview (or detailsview) connection is done, there is a datatable "behind the scenes" that manages the two way data binding. I also assume that data that has been bound to a gridview is carried over in the viewstate - it would be nice to clear out unneeded data in that.
