Forms Data Controls :: Insert Command Not Using Selected Value From DDL In A DetailsView?
Oct 8, 2010
My web form contains a detailsview control that I have added a templated field to with a DropDownList in the InsertItemTemplate. The DetailsView default mode is 'insert. My detailsview is attached to a sqldatasource that has a stored procedure in the db to handle the insert. When I enter data in the fields and select insert all values from the detailsview are written to the table except for the selection that was made in the dropdownlist. I am using the ddl.selecteditem.value to populate my variable however when the insert method is envoked it doesn't send my value. The DDL value that I am capturing does not need to be written to the table it is just a flag for some variables that need to be set at the stored proc level. How do I get the DDL selected value to be sent with the insert statement?
Here is my code behind:
Protected
Sub
DropDownList1_SelectedIndexChanged(ByVal sender
As
Object,
ByVal e
As System.EventArgs)
Dim temp
As DropDownList
Dim AccessLevel
As
String
temp = AddUserDetailsView.FindControl("DropDownList1")End
Sub
AccessLevel = temp.SelectedItem.Value
Label1.Text = AccessLevel
View 2 Replies
Similar Messages:
Mar 10, 2010
I am collecting user data using 3 detailsView, dv1,dv2, and dv3 each connected to sqldatasource , ds1,ds2,ds3. I would like the user to click one button(InsertBtn) and add all the data entered in each detailsview. I added
ds1.insert();
ds2.insert();
ds3.insert();
to OnClick event of InsertBtn. But the data does not get inserted...?? How can I make the user click one button and add the datas in each detalsView to database..???
View 1 Replies
May 26, 2010
I want to click on a date in the calendar and use that date in an insert command.
I have inserted a Calendar in Visual Web Developer and cannot figure out how to get the date so i can use it when inserting a new entry in my table... how do i "catch" the date and how to insert it as date.
I have the insert command working with dummy fields...
View 3 Replies
Jan 27, 2010
In my detailsview, I have an emptydatatemplate set up to allow users to enter new records. The code works. However, once the record is inserted, the detailsview defaults to a standard insert screen. I know this will cause confusion for the users. I would prefer the detailsview to either show in edit mode or a read-only mode. I have used detailsview.changemode and detailsview.currentmode in the custom sub created for the add new button of the emptydatatemplate- neither of which do what I was hoping. It would be even better if when there was no data, it defaulted to the insert screen (which seems like that should be an easy, no-brainer way for .net to function) but it doesn't. Or, I don't know how to accomplish it.
I don't want to force the user to click cancel after inserting an item through the emptydatatemplate just to be able to use the detailsview for other records.
View 2 Replies
May 7, 2010
I have a problem with DetailsView linked with Database, DetailsView is Insert/Edit enabled, and adding/ediditng data works, however........ when I add a new record (DetailsView in Insert mode) and press INSET instead going to record I have just created in Read-Only Mode it shows me blank form, it looks that the "linking" field is null.
View 3 Replies
Jan 6, 2010
I want to issue an INSERT command for an SQL Server table using DataAdapter without first issuing a SELECT command. Could anybody send me lines of code to handle this? Also how do i manage INSERT into selective table columns (I have 10 columns but i only want to update 2 of them)?
View 2 Replies
Jan 19, 2010
I have a details view to insert some data. I want to validate this data myself. use the ItemCommand to trap the insert command. If the data entered does not match what I need, I want to somehow stop the insert procedure at this point.
View 3 Replies
Aug 21, 2010
I have this code that hides a column in a gridview. (The column houses another nested gridview).
[Code]....
The trouble is that if I click the select link on one row that action to hide is carried out on all rows. How can I set this up so that it only hides the row that is selected?
View 5 Replies
Nov 11, 2010
I working on a ASP.net project, database is MS SQL
for a reason that cannot find why, when I insert an entry to the data base, the entry is duplicated.
The controll runs this:
Protected Sub grdCustomer_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles grdCustomer.SelectedIndexChanged
Dim Quote As New QuoteBLL
Dim Customer As New BeeSafeShutterSystemTableAdapters.CustomerTableAdapter
[Code]....
View 3 Replies
Oct 12, 2010
I've added a simple SqlDataSource to my site with insert properties. I've also created some code behind to capture the insert command (oninserting="SqlDataSource_NewsLetterSubscription_Inserting").
Thing is how do I actually trigger the command to 'insert' from a standard button?
<asp:SqlDataSource ID="SqlDataSource_NewsLetterSubscription" runat="server"
View 2 Replies
Apr 18, 2010
Is it possible to code DetailsView to go to the new record I've just insertted? Currently it appears to default to the first record, utlimatly I'd like it sorted Last name, first name and upon an Insert it should go to that new record on pageload.
View 3 Replies
Mar 23, 2010
I am using DetailsView to INSERT new records. I have a field "Paid Date"(date) that needs to be pre-populated with the current date. 90% of the time, the user will use the default date, however, there are times when the user will need to change the data as needed. I want to add this default in the code-behind. I DO NOT want to use template item.
View 3 Replies
Mar 13, 2010
1- THE METHOD :
public static int Insertclient(
int Cod_client,
string Nom,
string Tel,
string Adresse)
[Code]....
2- InsertClient.aspx.cs:
using System;
using System.Data;
using System.Configuration;
using System.Collections;
[Code]....
3- Database:
4- clientDetailsView :
5 - My request :
When cod_client already exisits , i want to mention that in result message.
View 6 Replies
Oct 18, 2010
I figure that this should be relatively straightforward, but I still can't get it to work. I have a gridview and a detailsview to set up shifts for students and teachers. I would like to be able to insert new shifts using a detailsview. I will limit the students, teachers and location to items that are in a dropdownlist. The problem is that when I handle the iteminserting event. the e.values collection doesn't contain all of the fields I want to populate. How do I add the new fields to the list. This is my codebehind:
Sub On_Inserting(ByVal sender As Object, ByVal e As DetailsViewInsertEventArgs)
View 3 Replies
Jul 6, 2010
I would like to know if I can do the following: when I am in insert mode, can I dynamically change the select command of and then display that result in the second dropdownlist based on what was selected in the first dropdownlist.
I would like to include the minimum code to demonstrate what I am trying to do.
[Code]....
[Code]....
View 4 Replies
Apr 25, 2010
I have a dropdownlist in the edititemtemplate of a detailsview. The dropdownlist is bound with an objectdatasource. The detailsview is bound to a seperate objectdatasource which connects it to the insert method. When the page loads the dropdownlist is bound properly. However, when I make a selection and select insert I get the following error: Could not find a property named 'DeptID' on the type specified by the DataObjectTypeName property in ObjectDataSource 'objCurrentProduct'. I've tried to remove the SelectedValue='<%# Bind("DeptID") %> attribute. I can then insert without an exception being thrown but the selected value of the dropdown is not recognized. Here is the code:
[Code]....
[Code]....
View 2 Replies
Oct 30, 2010
Scenario : I have two database tables with one to many relationship. eg:- City and Related news. So I have a gridview(Gridview1) which lists out all the cities and allows edit, delete of the gridview rows. Now since i wanted to display all news for the city, i have a nested gridview as a column in this Gridview1. This nested gridview displays all the news for the cities. And I have edit, delete buttons for this gridview too - So far, good - works fine.
Now what I would like to do is - To insert a new news item for a city. For this, I attached a detailsview to my nested grid(gridview2), and tried to insert. I need the primary key id of city table from the first grid (gridview1) to insert the news into the second database table and I could not access this value from the parent gridview. My gridview1 does not have datakeyname, it is programatically bound.
Also, When the gridview/detailsview is nested, it does not get listed in the event-handler list. So I cannot use say, detailsview1_iteminserting. I do not how to add this event handler
Has anybody done anything similar? When I started, it looked like a pretty straightforward thing - There must be some way to do this. But I just can't get it to work. How do you usually insert into the child table in a one-to-many relationship? Should i just be using two separate gridviews?
View 5 Replies
Oct 26, 2010
I'm inserting data into a SQL database through a detailsview. When a user inserts an incorrect data type or leaves a required field blank it shoots off to a big error screen. Is there a control that I can use that will allow it to give an error (with a little star or something) that says which field is incorrect without the big error screen?
View 3 Replies
Dec 24, 2010
'' I try to add an TemplateField to my DetailsView control with calander control, in all modes. but can only add it to cell(0).how can i insert in the middle of the row?
Dim tmpfld As New TemplateField
Dim c As Calendar = New Calendar()
DetailsView1.Rows(0).Cells(4).Controls.Add(c)
View 4 Replies
Aug 25, 2010
i have a detailsview in insert mode and that is bound to objectdatasource. now the class that is attached to objectdatasource is :
[Code]....
here ResturantId value has to be in session or from Dropdownlist and rest of the value from Detailview. So how to assign that value?
View 3 Replies
Nov 17, 2010
How do I set the value of a field in a detailsview to the selectedvalue of a gridview on the same page? I am also trying to set today date as value of another field in the detailsview as well as UserID. I wrote the following codebehind for the date setting:
TextBox tb = (TextBox)DetailsView2.FindControl("TextBoxCreDate");
tb.Text=System.DateTime.Now.ToShortDateString();
TextBoxCreDate is a template field in my DetailsView.
Unfortunately, I get a Object reference not set to an instance of an object. Error message.
View 4 Replies
Nov 19, 2010
I'm looking to find some command or control that will change fields in a detailsview insert a 0 if there was no data inserted into them. Some example code from my boundfield is:
<asp:BoundField DataField="Assignment_Travel_Time"
View 3 Replies
Nov 26, 2010
I want to populate my DetailsView with values from my first page.
This values get with session. I can display this values in my page. But i dont know how can i bring from my North Wind db. Here is my second page code behind in VB. How can i get this all data from my db based this values?
[Code]....
View 5 Replies
Sep 6, 2010
I have a gridView and DetailsView.gridView.enabledselection=true. when I select a row I want to display that record in DetailsView.I have done it previously but after lot of php coding, I forgot it :S can someone remind it to me?there is something datakeyname or something like this parameters to specify
View 5 Replies
Feb 1, 2010
I have got a detailsview in my webpage that inserts an item into a database when I click the insert button.
Once this button is clicked, the detailsview dissapears. Why it does this I don't know.
Some of my code:
[Code]....
View 3 Replies