Is it possible to dynamically (and generically) clear the state of all of a user control's child controls? (e.g., all of its TextBoxes, DropDrownLists, RadioButtons, DataGrids, Repeaters, etc -- basically anything that has ViewState)
I'm trying to avoid doing something like this:
foreach (Control c in myUserControl.Controls)
{
if (c is TextBox)
{
TextBox tb = (TextBox)c;
[Code]....
...but obviously that doesn't exist. Is there any easy way to accomplish this dynamically/generically?
I have create user wizard control and i put validation control for all field but when i close user control that validators dint clear in firefox or but clear in IE
I have a page that deploys a user control to display an article. The page will show a different article depending on the ID parameter fed in via querystring, and there are many thousands of articles in our db. Here is the problem: I need to cache the user control to improve performance. But editors constantly need to go in and make changes/corrections, which they want to appear instantly on the site. Is it possible to clear the cache for a specific article only once it has been edited? ie for the request article.aspx?id=123? If so how would I do this? Otherwise, if the cache is cleared for all our content every time a single piece of content is edited, it will defeat the object of caching in the first place. I have tried using a cache key as recommended here: [URL] However, this apporach suffers from the drawback mentioned above. have also seen that you can set caching up to be cleared by changes to the db. However, the particular table concerned holds content for a number of other sites and would also have the same disadvantage.
I want to create a user control that will again contain a user control that will be dynamically generated and can be repeated N times with respect to data present in data table.
I am using CreateUserWizard control on my admin page.After successfully creating a user with the control, it displays "Complete Your account has been successfully created."After clicking on continue button it sets the ActiveStepIndex Correctly.The problem is, while it sets the ActiveStepIndex correctly, it retains the old user account credentials.
I have created a web user control (MemberDetails.ascx) which is loaded dynamically on a page (Member.aspx) for my website. The control has some TextBoxes. I want to store the values inputted by a user in these TextBoxes to a database on the click event of a button that is on the Member.aspx page (i.e. not a part of user control).
I binded user control in gridview dynamically using templatefield (through code behind)
User control consists of 2 textboxes and one dropdown.
There is one button outside the gridview on the form. On click of that button i have to save the values of usercontrol's (child controls i.e textbox and dropdown values) but i am not able to get the values of user controls.
I am able to get User Control using LoadControl and child controls using FindControl but not able get values i am getting textbox values as blank and dropdown value as 0th selected index even though there is value entered by the user.
I have a composite user control consisting of three standard table cells (a legend, an image with a tool tip, and a text field control). If I add these to a TableRow in my aspx page it works fine and produces legal HTML in my source. The below works fine ...
However when I try to do the same programmatically (C#) the TableRow won't accept anything in its Controls collection that isn't a TableCell. I could make my control a nested table in its own right but I lose the alignment of my form items on the page with multiple controls, as each table aligns itself according to its contents. Is there anyway I can make the TableRow accept my control as collection of cells or do I need to do some casting or making my user control inherit some kind of TableCell attributes? I can also dynamically add my controls to a TableCell item which actually displays OK in IE but creates illegal HTML (<td><td></td><td> ... </td></td> - I assume this is illegal) in my resulting source. The code below DOES NOT work ...
Im working with asp.net web application,I need to get multiple gridviews dynamically based on the count (which i get from database) for that i took a web user control and i added a gridview there . iwant to load that usercontrol in aspx.cs based on the count..
I am trying to persist data in a dynamically populated ListBox in a user control. Here are the details
I have a user control which contains a a listBox and button. On Page_Load of user control I am populating the ListBox control with some values. On Click of button, I am trying to fetch the values which I have selected in ListBox. Though this seems very simple and straight forward I am unable to fetch values.
I have placed brake point at Page_Load and on click function, I am seeing that the moment the breakpoint hits Page_Load function (before If (!Ispostback)) , listBox.SelectedIndex is becoming -1.
One more thing here is, I am placing this user control in an SharePoint application page to be specific checkin.aspx page . ( I know this should not be done, but that is the requirement for me)
I don't think I understand fully how ASP.NET does inheritance of controls.I have a user control, ucBase, which has an asp.net label in the ascx file. Code behind references the label and it works fine during run time if the control is not a parent for another user parent.
If I have another user control, ucChild, inheriting from ucBase, the label in ucBase's code is always null. ucChild has no controls in its ascx fileThe server controls (like the label) needs to be declared in the ascx file and not created programmatically.What needs to be done for ucBase to see its own controls when it's a parent user control?
I've read that you should write repeaterControl.DataSource = null to clear the items in the control, but it doesn't work. Does anyone have any tips or links to articles about this problem?
I'm trying to make web form with two placeholders. Firs holder contains user control witch has list of buttons, each button opens different user control to second placeholder.
I get it to show user control in second placeholder but i can't get dynamically created user controls to fire events.
So how i can dynamically create working user control with button click?
Here is how i create those controls:
[Code]....
"field" is hidden field containing filename of user control to be created.
I have one label and table control in my webusercontrol.In my web form i want to add my webusercontrol dynamically and also i want to update value of label and table in my webusercontrol. I have tried using LoadControl method. The problem I am facing is that in my webform I am able to see webusercontrol but I am not able to update values.
I have this GridView that have it's DataSource as a list of previously selected products. For every item on it, I need to Eval it's ID and load a specifc form that the user must fill, then after that i've got to update the GridView.
I have made those specific forms as User Controls, is this the best approach for this scenario?
If yes, how can I dynamically load them, in a way that I can make queries/postbacks then update back my gridview?
I am trying to use my user control on my page which should load with data from a datatable. When the PageLoad event fires up I got the following message:
Object reference not set to an instance of an object. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
[Code]....
here is the page code which cause the error message:
I want to know how can we create web user control dynamically.
Scenario: Basically i am developing registration user control. I have a web page(say, SelectInputs.aspx) that lists different types of fields along with checkbox attached to each of them for selection. Once i select desired input controls (which should appear in user control) and click submit button then the file (.ascx) should be created from code behind.
eg: Lets say on SelectInputs.aspx i select fields viz. Firstname(textbox), Lastname(textbox), DateOfBirth(3 dropdowns) etc and click on submit button then from code behind the .ascx file should be generated that will include Firstname(textbox), Lastname(textbox), DateOfBirth(3 dropdowns) etc.
I have a page that contains radioButtons. Each click on a radio button loads a user control (.ascx) in the page.
What I am doing is loading all controls at the same time, but set their visibility to false. When a user clicks a radiobutton I set the visibility of the specific user control to true.
As a result I am loading all the user controls on each postback.
Im trying to create a "user control menu" where links to a page's usercontrols are placed at the top of the page. This will allow me to put several usercontrols on a page and allow the user to jump to that section of the page without scrolling so much. In order to do this, I put each usercontrol in a folder (usercontrols) and gave each control a Description property (<%@ Control Language="C#" Description = "Vehicles" .... %>).
My question is how can I access this description dynamically? I want to use this description as the link in my menu. So far, I have a foreach on my page that looks in the ControlCollection for a control that is of the ASP.usercontrols type. If it is I would assume that I could access its attributes and grab that description property. How can I do this? (Im also open to a better way to achieve my "user control menu", but maybe thats another question.) Should I use ((System.Web.UI.UserControl)mydynamiccontrol).Attributes.Keys?
This JQuery datatable is present in one of my webuser control named "LeftVerticalLayOut.ascx". I am dynamically instantiating Webusercontrol on click of a link button. This link button is bound with the trigger event of Update Panel control.
So clarifying once again : I have one UpdatePanel which I am triggering with Link button("lnkLoadControl") . On click on "lnkLoadControl" I am able to load Usercontrol("LeftVerticalLayOut.ascx") onto the updatepanel. Now the jquery datatable I am creating in load event of Usercontrol is getting generated.
After the datatable(having id as "example") is created, I am calling the below code in my
function loadHandler() { Sys.WebForms.PageRequestManager.getInstance().add_beginRequest(BeginRequestHandler); Sys.WebForms.PageRequestManager.getInstance().add_endRequest(EndRequestHandler); }
[code]...
Now as I am creating the UserControl on the fly, the Jquery in not getting applied.
I've got a custom ASP.Net web user control I've built; done this enough times before but this one is misbehaving and I can't spot why.
Where the calling page includes the user control directly in its markup, all is well and the control behaves as expected.
However if the page adds this particular control dynamically (to a placeholder in the master page, which is what's calling this whole thing) the elements within it stay firmly NULL - nothing from the user control gets written to the client at all, including static content within the user control.
