i want to put the output of store procedure in ImageUrl
this is behind code, i wrote it on onclick event of asp:image
Pic is the name of a folder in root of site , i want to put the output of store procedure in Eval:
Image1.ImageUrl("~/pic/"+Eval(" " ));
I want to correspond the output of a store procedure to the image onclick event I mean here:
protected void imageLoaded(object sender, EventArgs e) {
Image1.ImageUrl("~/pic/"+Eval(" " )); }
I don't know what I should write in Eval.
I want to execute a Store Procedure and then get the Output in one table. However I am not getting the query. I want something like this execute 'Stored procedure name' 'param1','param2','param3' and then get the result into some table. Is this possible?
select * into #table from (execute 'Stored procedure name' 'param1','param2','param3')
I am realitivly new to c# and I am trying to do something that is probably simple, but I might just be over thinking it.What I want to do is have an image change based on a return of a sql data call. I am using a stored procedure that reads values and uses a case to switch between red, yellow, green for status. For example, I have nine items that the SP goes through and returns one of the colors. What I would need is if it detects a red, change the image to red and so forth. Now, when I execute the SP in C# I can get the data but it always just reads the last value. So if it had a red in there and the next one is a green, it uses the green. I even thought about reading the colors and using an IF statement adding the values to determine which color should be used.
[Code]....
My SQL stored procedure returns 3 different datasets as follows:
team_id name
1 Team1
2 Team2
...and more
location_id name
1 Dallas
2 New York
...and more
branch_id name
1 Austin
2 New Jersey
...and more
How do I put this data into one Dataset so that I can loop through the data and manipulate it?
[Code]....
Above is dynamic sql and when it is executed by sp_executesql then I got output as as xml. If I want to store that XML in a variable. So then what I need to add in my tsql script.
I have a stored procedure that works fine for classic asp, but how can I get my output parameters data back from in /MVC 2 / linq/ entities framework model . I have inported the function also, but when i try to code it i dont get results ...i know this is a matter of lack of / knowledge or exmple because i have been scouring the web for it and cannnot find into that accually works.
here is the stored proc.
[Code]....
Here was the one of the few tries I did:
[Code]....
but it executes fine does not give me an error, but also does not return the info i need to the viewmodel
I keep seeing stuff about "ref" on the net but "ref" shows " arbument # should not be passed with the ref keyword.
So i am not sure if there is a problem with the model, or with my understanding this, Now for your info I can do the same step with returning a dataset from a stored procedure fine, but I dont want a data set I just want excatly the data in the output parameters from the stored procedure.
i had a stored proc: How can i get the final select statement in the code behind.
ALTER PROCEDURE [dbo].[tgms_reclass_PO_bip](@po VARCHAR(20), @old_gl VARCHAR(20), @new_gl VARCHAR(20),@output varchar(500) out )
AS
IF (SELECT COUNT(*) FROM mm2po WHERE scode = @po) = 0
BEGIN
SET @output = '1'
SET @output = 'Invalid PO Number'
END
[code]...
From this below stored Procudure, using VB.Net code can i get the Values like "Number of Rows Affected" and "Yes / No" Value from "Select"Stored Procudure:ALTER PROCEDURE [dbo].[lookup] @week_date datetimeAS
DECLARE @currweek datetime, @inweek datetime
IF @week_date = '10/14/2010'
BEGIN
UPDATE dbo.work_status SET ob_flag = 0, ob_update_date = NULL WHERE dbo.work_tatus.week_date ='10/14/2010'
SELECT 'YES'
END
ELSE
SELECT 'NO'
RETURN 0
how do I add an output parameter to a Stored Procedure that returns a code or string to the calling app
View 1 RepliesI am having some trouble with the below code snippet. It is a stored procedure which executes on load that has an output parameter which should display in a label. Familiar which Vb however not so much in C#.
View 2 RepliesI am calling a stored procedure, that exists in a SQL Server 2005 database, using ADO.NET, in which I instantiate a sql command object.
The stored procedure has an ouput variable like '@packageCode VARCHAR(100) = NULL OUTPUT'.
Can I set it's value when creating the sql command object? Or I can never set a value for an output type variable in a stored procedure?
i hav declare a Variable in stored procedure as@Total numeric(18,2) output..@Total Value is calculated 177.12 in stored procedure but when i return in Class.cs..its output is 177..
View 4 RepliesI have written SP like this to get my required output.create procedure [dbo].[usp_gl_ProjectBudgets] set nocount on begin tran declare @SPError int
declare @y1 varchar(20)
declare @y2 varchar(20)
declare @y3 varchar(20)
declare @y4 varchar(20)
declare @y5 varchar(20)
declare @Glink int
declare @i int
set @y1='Year1'
set @y2='Year2'
set @y3='Year3'
set @y4='Year4'
set @y5='Year5'
set @Glink=1
set @i=1
[code]...
We had a simple Gridview that displayed a column list as Linkbuttons but we now need to display three columns as one, so I wrote a simple stored procedure to do it. However, the output in the Gridview shows duplicates and is not in order even though I specifySELECT DISTINCT in the result select as shown below.
ALTER PROCEDURE [dbo].[GetGeneralAction]
Add the parameters for the stored procedure here
AS
BEGIN
SET NOCOUNT ON;
CREATE TABLE #TempTbl (GeneralAction varchar(300) )
INSERT INTO #TempTbl (GeneralAction)
SELECT [General Action]
FROM [dbo].[Formulary2011]
INSERT INTO #TempTbl (GeneralAction)
SELECT [General Action2]
FROM [dbo].[Formulary2011]
[code]...
I have a question. How do we define date output parameters for a stored procedure?
before you answer,I should mention that I am not referring to the sql syntax definition ,which is @mydate datetime output.
This is ok,what i am asking is HOW DO I SPECIFY IT IN LINQ WHEN I NEED TO CALL THE STORED PROCEDURE IN THE SERVER SIDE CODE. I am repeating that I do I am not referring to the sql definition .
here my code-
using (SqlDataReader sqlDataReader = ExecuteReader(CommandType.StoredProcedure, StoredProcedures.AuthenticateUser, sqlParameter))
{
isAuthenticated = Convert.ToBoolean(sqlParameter[2].Value);
if (isAuthenticated)
{
if (sqlDataReader.Read())
{
User = new UserEntity();
DbHelper.GetEntity(sqlDataReader, User);
}
}
}
I always get isAuthenticated as false because sqlParameter[2].Value is null all the time but when I execute my query with ExecuteNonQuery it gives me the value but in that case I can not fill the entity.
I have stored procedure that increments a number. I am supposed to use the newly generated number and insert it into a table. My question is how do I execute the stored procedure, with a hardcoded value of 3 that it expects as a paramter, receive the number it generates as the output parameter and use it in the insert statement.
Here is the stored procedure code:
CREATE PROCEDURE [dbo].[Generate]
@myid int,
@next_no int output
AS
update mytable
set mynumber=mynumber + 1, @next_no = number
where myid=@myid
RETURN
Here is my insert statement, that I tried and it failed:
EXEC @GetNo = Generate '3'
Insert into customers (custid, name, phone ) values
( @GetNo, 'MSFT', '800-345-5678')
I am creating a nightly process using a stored procedure to check for expiring records and emailing myself and the folks that need to see the information. The trouble I am having is trying to send the data in table "like" view in the message body.Here is the Proc you can see the point at which i try to use a table vairble then use it as a parameter for calling the email proc but it doesn't seem to work.
View 5 Repliesi want to return two output parameter n temp table from sql server stored procedure
View 6 RepliesI have a stored procedure in my database to update table. I need find the value from the gridview and pass them to the store procedure. When I call the stored procedure from VB.net, error appears "could not find stored procedure". I am sure the store procedure is there.
My code is
The store procedure
[Code]....
My code in VB.net
[Code]....
HOw I can show the store procedure result is the drop down?
View 4 RepliesI am creating an ASP.NET Wiki for myself to track the knowlege I gain in C# and other language.
I have created a Stored Procedure to insert a category into a DB, the DB has two fields C_ID(int) and Category(varchar 25). In my ASP page, there is no field for C_ID, it increments automatically by IsIdentiy = true;
When I try to excute it, it fails. What is the best approach to handle this?
Code:
ALTER PROCEDURE dbo.InsertCategory
@ID int,
@CATEGORY varchar(25)
AS
INSERT INTO Wiki
(C_ID, C_Category)
Values (@ID, @CATEGORY)
/* SET NOCOUNT ON */
RETURN
Did I miss something to insert from the .aspx page?
try
{
//create a command object identifying the Stored Procedure
SqlCommand cmd = new SqlCommand("InsertCategory", conn);
//Set the command type
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(new SqlParameter("Category", txtAddCatagory));
cmd.ExecuteNonQuery();
I had a little problem with the value that one of my SPs returns. In my SP, I create some temporary tables to store certain data from multiple tables and contains some queries for an advanced calculationBut precisely yesterday, the value that the SP returns was incorrect. I tried to look at the SP and the data again and everything was OK, but not the result from the SP.And what the heck!!..today the value is totally right ...I truly have no idea what's wrong with the SP..Is there anyone knows what the root of cause is?
View 4 RepliesI have several store procedure to do different things. When user click submit button, call store_procedureOne, store_procedureTwo, store_procedureThree.
Here is my code.
protected void ButSubmit_Click(object sender, EventArgs e)
{
OleDbConnection myConnection = new OleDbConnection(connStr);
OleDbCommand myCommandUpdate = new OleDbCommand("store_procedureOne");
myCommandUpdate.Connection = myConnection;
myCommandUpdate.CommandType = CommandType.StoredProcedure;
myConnection.Open();
myCommandUpdate.ExecuteNonQuery();
myConnection.Close();
Server.Transfer("NextPage.aspx", true);
}
I do not know how to add store_procedureTwo and store_procedureThree at
OleDbCommand myCommandUpdate = new OleDbCommand("store_procedureOne");