I want to execute a Store Procedure and then get the Output in one table. However I am not getting the query. I want something like this execute 'Stored procedure name' 'param1','param2','param3' and then get the result into some table. Is this possible?
select * into #table from (execute 'Stored procedure name' 'param1','param2','param3')
I have setup a job in SQL Server Agent which run a store procedure.
[Code]....
After the job excuted, the temp table have not been created.
If I type "exec data_syn_ClearAllEposData". The temp table has been created.
Global Temp table cannot create in SQL SERVER AGENT?
i want to put the output of store procedure in ImageUrl
this is behind code, i wrote it on onclick event of asp:image
Pic is the name of a folder in root of site , i want to put the output of store procedure in Eval:
Image1.ImageUrl("~/pic/"+Eval(" " ));
I want to correspond the output of a store procedure to the image onclick event I mean here:
protected void imageLoaded(object sender, EventArgs e) {
Image1.ImageUrl("~/pic/"+Eval(" " )); }
I don't know what I should write in Eval.
i hav declare a Variable in stored procedure as@Total numeric(18,2) output..@Total Value is calculated 177.12 in stored procedure but when i return in Class.cs..its output is 177..
View 4 RepliesI have stored procedure that increments a number. I am supposed to use the newly generated number and insert it into a table. My question is how do I execute the stored procedure, with a hardcoded value of 3 that it expects as a paramter, receive the number it generates as the output parameter and use it in the insert statement.
Here is the stored procedure code:
CREATE PROCEDURE [dbo].[Generate]
@myid int,
@next_no int output
AS
update mytable
set mynumber=mynumber + 1, @next_no = number
where myid=@myid
RETURN
Here is my insert statement, that I tried and it failed:
EXEC @GetNo = Generate '3'
Insert into customers (custid, name, phone ) values
( @GetNo, 'MSFT', '800-345-5678')
i want to return two output parameter n temp table from sql server stored procedure
View 6 RepliesI had a little problem with the value that one of my SPs returns. In my SP, I create some temporary tables to store certain data from multiple tables and contains some queries for an advanced calculationBut precisely yesterday, the value that the SP returns was incorrect. I tried to look at the SP and the data again and everything was OK, but not the result from the SP.And what the heck!!..today the value is totally right ...I truly have no idea what's wrong with the SP..Is there anyone knows what the root of cause is?
View 4 RepliesI have a sql which the data read from the store procedure is very dynamic.
i have finish the first part of the sql in stored procedure but having problem in executing it.
[Code]....
How do i use EXECUTE SP_EXECUTESQL to do this??
storeprocedure code:
ALTER PROCEDURE sp_CheckForDuplicates
(
@UserName VARCHAR(50) = NULL,
@FirstName VARCHAR(50) = NULL,
-----------------------------
Error show :if (objReturnPara>0)
[Code]....
operator '>' cannot be applied to operands of type 'object' and 'int'
operator '>' cannot be applied to operands of type 'object' and 'int'
I am using SqlDataSource control to query my data via store procedure. Based on which option the user picked from the RadioButtonList control, I want to dynamically at run time to choose which store procedure gets executed. How do I do this? I am already using Query String for my parapmeters. I can could use this for the store procedure as well. The problem is, how do I get the SelectCommand to pick the store procedure name from the parameter passed in the URL?
View 7 RepliesWhen I try to create a stored proc in SQL Server Express 2008 by right clicking on the Stored Procedures folder of my database and selecting New Stored Procedure, then attempt to save, it saves the procedure as a SQL query in the projects folder instead of saving it as a stored procedure in the Stored Procedures folder of my database.
View 2 Repliesi am a new bee in SQL Server 2005. I have a stored procedure that accept two parameter , variable @ColumnName as column name and @SearchText as search text.
My stored procedure is written as below:
[Code]....
but the error i get is "The 'usp_GetPlantTest' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be returned instead."
Here's a stored procedure I created that uses another stored procedure inside it to return a value:
[Code]....
Note the 'exec dirinfo.dbo.d_searchempbyname @TicketSubName' part. That stored procedure will return a single record. What I need is to get a single column from that recordset (in this case, the email address of the employee), and store that value in a variable.
My insert is adding a record to the database in the call to the stored procedure in SQL Server, but a -1 is returned - Shouldn't it return 0 if the insert/update was successful?
Result = myCommand.ExecuteNonQuery();
I am creating a nightly process using a stored procedure to check for expiring records and emailing myself and the folks that need to see the information. The trouble I am having is trying to send the data in table "like" view in the message body.Here is the Proc you can see the point at which i try to use a table vairble then use it as a parameter for calling the email proc but it doesn't seem to work.
View 5 RepliesI want to pass the Array ( object[]) or Structure data type value to the store procedure through
ibatis .net. I can do same by commandtext using SQLDBType.Structure. I am using Table value function in sql server 2008 and .Net 2010.
[URL]
I am trying to store data from an XML file to a table in my database, but I keep getting the same error.
This is my code from the cs file:
[Code]....
And this is my error:
Violation of PRIMARY KEY constraint 'PK_Areas'. Cannot insert duplicate key in object 'dbo.Areas'.
The statement has been terminated.
In my XML file I have both existing rows and new rows for the database table. I'm guessing I have to do something to sort out the the rows that are not already in the database, but so far I have been unsuccessful to figure this out.
I have read up on uploading multiple images and storing them to a file but so far i am only able to store one image into both file and into database. The problem i have is that i don't know how to create the table to store more than one image?
View 8 RepliesI've written a stored procedure which uses a table variable. The stored procedure is shown below:
[Code]....
The table variable @CaseNumbers is declared, and is a bunch of values are inserted using a table-valued function called SplitStringIntoInts. At this point I can select from @CaseNumbers and this works fine.But when I try to join onto @CaseNumbers, the name '@CaseNumbers' in the ON clause is highlighted with the error 'Must declare scalar variable @CaseNumbers'. What?! It's not scalar, I declared it ages ago and I have used it since!
my stored procedure is always extract some data into temp table such as"select name,address,content into #TEMP1 from table1,table2,table3"
finally, select another table together with #TEMP1 to extract all desire data from one queryselect T.name,T.address,T.content,C.other from #TEMP1 T, otherTable C
where T.ID=C.IDI would like to ask if i want to join one more table T2 into final query with "otherTable left C outer join on C.ID=T2.ID"
i m using ##Temp Table in stored procedure..it gives this error There is already an object named '##people' in the database.in two codition1.in case of multisession2. if transaction drop in between even i drop Table in Last in stored procedure..what can i use in place of temp table to hold data for a time being
View 1 RepliesThis may not be the correct place to put this as it is both a stored procedure AND Visual Studio 2008 problem.
I have the following stored procedure:
[Code]....
I have been mokeying around with it because of what is happening. I have a dataset, call it dataset1. I drag this stored procedure onto the dataset. I EXPECT a datatable to appear, instead the data set adds this store procedure to the queries table adapter and sets the exec mode to 'NonQuery' which unless I am very mistaken, means "don't expect a dataset back from this' when in fact you DO expect a dataset back from this.
The SQL server is a Windows 2000 Server running SQL 2000. It has never caused us a moments grief since we set it up oh-so-many years ago.
If I connect to a different database and drag a query into the same dataset I get a datatable as I expect. I cannot see where / how this procedure could be wrong. The query when executed returns exactly the data I expect, in the format I expect (looks like a table, acts like a table in the Query analyzer).
Here is the code copied from [URL] In asp.net code behind, I use try-catch try to catch any error but never catch it. In SQL database, if I rename Employees to Employeesx or change column DepartmentID to DepartmentIDx, record will not be deleted (it is right) without any error (it is wrong, suppose catch an error).
CREATE PROCEDURE DeleteDepartment
(
@DepartmentID int
)
AS
BEGIN TRANSACTION
DELETE FROM Employees
WHERE DepartmentID = @DepartmentID
IF @@ERROR <> 0
BEGIN
ROLLBACK
RAISERROR ('Error', 16, 1)
RETURN
END
DELETE FROM Departments
WHERE DepartmentID = @DepartmentID
IF @@ERROR <> 0
BEGIN
ROLLBACK
RAISERROR ('Error', 16, 1)
RETURN
END
OMMIT
I have a table in SQL where I insert data (CatCodes) using C# code but I want to insert ID code (DealerID) with it as well. Following is my Stored Procedure and C# code:
[Code]....
C#:
[Code]....
As you can see, I am insering CatCode values in Categories table using string cbspecialities.
How can I insert DealerID the same way? DealerID is automatically generated in tblDealers table when "InsertExternalInfo" asp.SqlDataSource control runs "InfoInsert" SP.
[Code]....
