Running Locally With IIS7?
Jan 3, 2010
This may be obvious to many of you (hopefully!) I have a site under asp.net created using Visual Web Developer 2008 and MSSQL 2007 (all express editions)All ok so far.My PSP requires the addition of a couple of traditional ASP 'screens' to redirect payments to them. I cannot run this under VWD2008 development server as .asp are not allowed, so am looking to move to running it locally under IIS7 which is turned on.How do I alter the site to run on the IIS7 instance?
View 3 Replies
Similar Messages:
Nov 14, 2010
The application pool randomly shuts down. I am assuming this is due to Rapid Fail Protection and errors are occuring that are triggering it. However... there are no errors being reported in the event logs. So my next inclination is to think of the possibilities of a memory leak. How do you test for memory leaks on a website running locally?
View 2 Replies
Jun 28, 2010
I have a very simple and stupid problem but I'm unable to find a solution. I'm trying to create folders and files locally through my code, however I get a permission exception when I try to write in a folder in my application. Normally I'd run this on a remote server, and ask the system administrator for writing permission on this specific folder, but I need to run this locally for the moment.
If I navigate to the file in windows explorer, and right click the folder and click on Properties, I can see that it's set as Read Only. However when I try to disable this tickbox and click on Accept, nothing happens. It ignores me, and next time I open the Properties of this same folder, it's still marked as Read Only.
I've googled this and found a solution which implies using MS-DOS and a command named "attrib". This is not working for me either. I also read about adding an ASP.NET account on my PC and granting the right permissions to this, but I'm not sure how to do is.
View 8 Replies
May 14, 2010
My application running locally on my PC - on the Visual Studio Server (Cassini Server).My SQl Server DB is hsosted in a server on the internet.I think there are some configurations to be done in the SSMS ( Enable Remote conn.).
View 1 Replies
Jul 4, 2010
some differences hosting a website on some remote server VS running it locally on dev environment.The reason why i am asking is, If I run my website locally it works fine no exceptions, runs smooth. But when deployed on a remote hosting server. Its like a nightmare to me :(very often i get object Instance not set to instance of object..... I am ok with the error message, But the same situation should happen locally,
View 6 Replies
Apr 4, 2011
I want my .net2.0 webservice application to run on IIS7.0 under CLR4.0, Is this possible simply creating an apppool with Classic,.netframework 4.0 settings and pointing my app to this pool? I have tried this and it works fine, but want to confirm on right track?
View 2 Replies
Oct 26, 2010
I changed the maxAllowedContentLength to
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="5024000000" />
</requestFiltering>
</security>
In my web.config, but when running on IIS7 I get this error:
The 'maxAllowedContentLength' attribute is invalid. Not a valid unsigned integer
but when I run in the VS server it run normally without any errors.
How to config my website to allow upload files with 500MB size, without this problem on IIS7?
View 1 Replies
May 30, 2010
Is it possible to determine the managed pipeline IIS7 is running under in ASP.NET?
View 1 Replies
Jan 11, 2011
I am trying to port an existing ASP.Net 1.1 website to another web server that currently runs IIS7 and a number of websites that target either .Net 2.0, 3.5 or 4.0. All other sites continue to work perfectly. Unfortunately, I can only browse static files on the newly imported site. If I try to access any of the Features in IIS7 for the new sit
View 1 Replies
Sep 22, 2010
Can someone tell me if its possible to run both a 64bit compiled web site and a 32bit compiled website on the same IIS7.5 machine. The core OS would be Windows 2008 R2 64bit. I looked around and can only find how to switch the appPools to 32 or 64. But the question I want answered is can you have one appPool 32bit and another 64bit?
View 1 Replies
Dec 9, 2010
I'm using ASP.net 3.5 to run a .exe with Process.Start(). It works fine if I use the host that's built-in to VS2008, WinServer 2003 but if I use IIS7 it no longer runs. I am using the following code.
Process proc =
new
Process();
proc.StartInfo = psi;
proc.StartInfo.FileName = "cmd.exe";
proc.StartInfo.Arguments = args;
proc.Start();
View 2 Replies
Jun 10, 2010
I am deploying a public ASP.NET website on an IIS7 web farm.
The application runs on 3 web servers and is behind a firewall.
We want to create a single page on the website that is accessible only to internal users. It is primarily used for diagnostics, trigger cache expiry, etc.
/admin/somepage.aspx
What is the best way to control access to this page? We need to:
Prevent all external (public) users from accessing the URL. Permit specific internal users to access the page, only from certain IPs or networks.
Should this access control be done at the (a) network level, (b) application level, etc.?
View 3 Replies
Dec 29, 2010
Does anybody knows if it is possible to make URL routing in a ASP.Net webforms website that is running under the Classic .NET AppPool.
I've tried a few things here, but it just works when I switch from Classic AppPool to Default AppPool.
** the web site MUST run under Classic AppPool.
View 2 Replies
Feb 25, 2010
I have a need to run an application in classic mode for backwards compatibility with a specific application, and am trying to understand what kind of impact that will have on the performance of an MVC application that is running on the site. If we put a few static file maps (for .js, .css, .png, etc) above the ASP.NET wildcard map to reduce the amount of processing by the ASP.NET handler, will we be approaching the integrated mode in terms of performance?
The thing i'm primarily concerned with is any effect this might have on output caching. I understand that integrated mode might (?) allow for the output cache to handle non ASP.NET content, but that isn't really a concern. We're more interested in ensuring that the MVC application has full use of the output cache. Empirically i've found that the two configurations operate on par when things go well, but if the page references resources that are not available, the integrated mode tends to fail much more quickly than the classic mode (e.g. 500 ms vs 10 seconds), reducing 'hang time' on the page load.
View 1 Replies
Nov 6, 2010
i have one problem in executing the ssrs reports..
i've developed one project for that project there are some SSRS reports which are deployed
in path ( "http://localhost/reports/") it is working fine...
when i run through the project and press F5 ( i.e execute) the reports
are displaying correct with full of content in that...
now i want to host that project.. so i've created one virtual folder named as proj in IIS7..
and i've assigned the project to that..
when i execute from IE7 and type the path http://localhost/proj then the main page is displayed
and when i click the button print then it is showing the empyt report with only the toolbar above
no content are there in reports ...
but when the run the project i.e F5 then the report is displayed with full of content...
View 1 Replies
Feb 15, 2011
I have created an entity model and linked service which works fine when testing from within VStudio 2010 but when I publish and browse to svc I get an HTTP 500 error. Thought this might be linked to db credentials (anonymouss access) so set this to fixed sa login as test , no success. Also have set all IIS app pool to use v4.0 of .net. Using IIS7 running under Windows 7, svc entityaccessrule set to "*".
View 1 Replies
Nov 29, 2010
I've written a small MVC application and am having trouble deploying it to localhost. I use the publish feature when I browse http://localhost this is what I get: HTTP Error 403.14 - Forbidden The Web server is configured to not list the contents of this dir A sample aspx page is rendered correctly.
I've tried the aspnet_regiis -r I've made sure ASP.NET is installed in Windows Features. The web platform installer tells me MVC 2.0 is installed. I did install VS2010 first and then IIS so I suspect that maybe causing problems but in the past aspnet_regiis -r has fixed that.
View 4 Replies
Jul 1, 2010
I am executing a long-running Oracle stored procedure from .NET. The procedure takes about three hours to run. Ideally, the user should be able to kick off the procedure, close the browser, and come back later to check the results.
The problem is that the connection to the Oracle procedure is lost after exactly an hour. As you would expect, the Oracle procedre runs to completion if it is executed from SQL Plus. Strangely enough, it will also run to completion if I run in debug mode on my local machine (I start two threads, one of which executes the procedure. I set a breakpoint on the second thread).
Here is my connection string:
data source= (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=serverx)(PORT=1521)))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=TestSID)))
Some relevant sections from web.config:
<sessionState mode="InProc" cookieless="false" timeout="3000" stateNetworkTimeout="72000"/>
<httpRuntime executionTimeout="18000" maxRequestLength="2097151" />
Any thoughts as to why the connection is being lost in exactly an hour, and what I can do to maintain the connection until the procedure finishes?
View 1 Replies
Mar 4, 2011
For a web application I am using ASP.NET C# (OS- Windows7, .NET 4) and the task has done. But I don't know how to run it locally in Windows7 as well as in Server 2008(.NET 4 and IIS installed in server 2008). And I have to run it in both the platfrom.
View 3 Replies
Feb 4, 2011
I've searched around and found a lot of advice saying to modify the hosts file as such:
127.0.0.1 mydomainname.com
I've done that, but my actual site at mydomainname.com is still being used. Any other troubleshooting steps I could take?
View 3 Replies
Mar 10, 2010
I have a asp.net mvc application.
Some pages require SSL, is there a way to mimick ssl locally through cassini or IIS 7?
Edit So I followed the directions for the answer below that linked to ScottGu's blog post.
View 2 Replies
Oct 4, 2010
i've created an ajax test call that works locally, but when i upload to my hosts(2 of them) i get nothing. My sample page is: Linkage to test page.
my code is as follows:
[Code]....
View 8 Replies
Feb 3, 2010
I have built a custom Ajax User Control which uses the AsyncFileUpload control released with the latest Ajax Toolkit.
On my local machine the application works fine without error, however if I deploy the app onto my web server the functionality breaks.
I am trying to add a file via the AsyncFileUpload control, save it to the web server, then save some details into a datatable which is displayed in a gridview. All of this sits in an update panel.
When uploading small files (under 55kbs) the process works fine, however when uploading larger files, it doesn't like it. The control uploads the file successfully to it (the client error is not triggered), but it breaks when I try to save it to the web server. Upon saving, the document saves OK, but all the data is stripped away. It just saves the filename with no content. It looks like the AsyncFileUpload control has lost the File in session, therefore cannot save it. However the AsysncFileUpload.filename still exists and AsyncFileUpload.HasFile is returning true.
Has anyone seen anything like this before or have any ideas why this could be happening? I have set the web config httpRuntime maxRequestLength = 20480, so it shouldnt be that.
See code:
[code]....
View 2 Replies
Mar 7, 2011
I have created a webservice (Service.asmx) which performs a simple db update However i have encounted a limitation with the installation workstation.
Turns out that the workstation is not allowed to have web servers (IIS etc) installed onto it.
so obviously i have a problem now.
There is currently some windows application installed on the workstation that is supposed to call my webservice to perform an update.
Is there any alternatives to getting web service up on the local environment?
View 6 Replies
Jul 12, 2010
This my scenerio
1. I have created a web service
2. I need to host it in IIS locally for testing purpose.
3. Can we set port locally or automatically port '80' is assigned.
View 1 Replies
